Kingston ValueRAM 32GB DDR5 SDRAM Memory Module for Notebook

Upgrade your laptop’s performance with Kingston ValueRAM, a reliable 32GB DDR5 memory module designed for notebooks. Built to deliver faster speeds, improved multitasking, and enhanced efficiency, this DDR5-5600 module (PC5-44800) is engineered to help you breeze through demanding workloads—from heavy browsing and content creation to memory-hungry applications. With a compact 262-pin SoDIMM form factor, dual-rank organization, and a generous 32GB capacity, you’ll experience smoother responsiveness, quicker boot times, and snappier app switching without sacrificing energy efficiency.

• Blazing DDR5-5600 performance for notebooks. This Kingston ValueRAM module runs at DDR5-5600 (PC5-44800), delivering significantly higher bandwidth and lower latency than previous generations. The result is faster data transfer, quicker application launches, and smoother multitasking on modern laptops. Whether you’re editing 4K video, running multiple virtual machines, or gaming on a portable rig, the 32GB capacity and high-speed memory keep your system responsive even under heavy loads.
• 32GB capacity, dual-rank design for demanding multitasking. With 32GB of memory, you won’t hit the ceiling when juggling numerous programs, browser tabs, and creative tools. The dual-rank configuration helps maximize memory density and bandwidth, translating to seamless transitions between heavy tasks and more headroom for RAM-intensive workflows. This makes it an excellent upgrade for creators, professionals, and power users who need sustained performance without compromise.
• Notebook-ready 262-pin SoDIMM, unbuffered, non-ECC. Specifically engineered for notebook platforms, this module uses the compact 262-pin SoDIMM form factor. It’s unbuffered and non-ECC, typical for consumer laptops, ensuring compatibility with a wide range of mainstream notebook models while providing the reliability and speed DDR5 memory brings to mobile systems.
• Low power operation with 1.10V for efficiency. DDR5 memory is optimized for energy efficiency, and this Kingston module operates at a modest 1.10V. Lower voltage translates to reduced power consumption, cooler operation, and longer battery life during everyday tasks and light gaming—an important benefit for mobile users who need performance on the go without frequent recharging.
• Reliable performance with Kingston quality and lifetime warranty. Kingston ValueRAM is known for dependable, tested memory solutions. This 32GB DDR5 module comes backed by Kingston’s lifetime warranty, ensuring enduring compatibility and confidence across supported notebooks. Enjoy consistent performance across software updates and system revisions, backed by a brand trusted by professionals and everyday users alike.

Technical Details of Kingston ValueRAM 32GB DDR5 SDRAM Memory Module

• Capacity: 32GB
• Memory Type: DDR5 SDRAM
• Form Factor: 262-pin SoDIMM
• Speed: DDR5-5600 (PC5-44800)
• Latency: CL46
• Voltage: 1.10V
• ECC: Non-ECC
• Buffered/Unbuffered: Unbuffered
• Rank: Dual-rank
• Compatibility: Notebook/Laptop systems with DDR5 SO-DIMM slots
• Warranty: Lifetime Warranty

How to Install Kingston ValueRAM 32GB DDR5 SDRAM Memory Module

• Power down your notebook completely and unplug the power adapter. If your device has a removable battery, disconnect it as well to minimize any risk of electrical shock.
• Discharge any static electricity by touching a grounded metal object or by using an anti-static wrist strap before handling memory modules or internal components.
• Open your notebook’s memory access panel per the manufacturer’s instructions. This typically involves locating the RAM cover on the underside of the device and removing a few screws to reveal the memory slots.
• Locate an empty DDR5 SO-DIMM slot (or the existing slot to upgrade alongside existing memory, if supported). If you’re replacing an existing module, gently release the retention clips on each side of the slot.
• Align the notch on the Kingston ValueRAM module with the slot’s keying and insert the module at a slight angle (about 45 degrees) into the slot. Once the components are seated, press down evenly on the module until the retention clips click to secure it in place.
• Replace the memory access panel and screws, reattach the battery if removed, and reconnect the power supply. Power on the notebook and enter the BIOS/UEFI if needed to confirm the new memory is detected and running at the rated speed.
• In the operating system, verify memory is recognized as 32GB and ensure the system is operating with the DDR5-5600 profile. If the system supports XMP or memory profiles, enable them as appropriate for optimal performance.
• Run a quick stability check or memory test to confirm proper operation. If you encounter issues (e.g., Windows not recognizing the full capacity), reseat the module, recheck compatibility, or consult the notebook’s support resources for recommended configurations.

Frequently asked questions

• Q: What does 32GB DDR5 memory do for my notebook?
  A: It provides a large memory pool that enhances multitasking, allows frequent switching between apps without slowdowns, and supports memory-intensive workloads like content creation, virtualization, and large datasets, all while benefiting from the efficiency and speed of DDR5.
• Q: Is Kingston ValueRAM compatible with all laptops?
  A: Compatibility depends on your notebook’s memory slot and CPU support. This 32GB DDR5 module uses a 262-pin SoDIMM and DDR5-5600 speed, so it works in notebooks with DDR5 SO-DIMM slots that support this standard. Always check your device’s memory specifications and firmware requirements before upgrading.
• Q: Do I need to adjust settings in BIOS/UEFI after installation?
  A: In many cases, the system will auto-detect the new memory and run at the rated speed. Some systems support memory profiles like XMP; if available, enabling the appropriate profile can help you reach the advertised DDR5-5600 speed. If issues arise, consult your notebook’s manual or support resources.
• Q: What is the advantage of dual-rank memory?
  A: Dual-rank memory typically offers higher capacity and improved data throughput in many configurations, contributing to better multitasking performance and smoother operation when running memory-heavy applications on compatible systems.
• Q: Is the memory non-ECC and unbuffered?
  A: Yes. The module is non-ECC and unbuffered, which is standard for mainstream consumer notebooks. This design emphasizes compatibility and cost efficiency while delivering robust performance for everyday and professional use.