Lenovo 4XB7A38273 960 GB 2.5" SATA SSD

Discover a high-capacity, enterprise-grade storage solution engineered for reliability, performance, and effortless maintenance. The Lenovo 4XB7A38273 960 GB Solid State Drive is a 2.5-inch internal SSD built for servers and data centers that demand consistent I/O throughput, predictable latency, and enduring operation. With 960 GB of fast flash storage, this drive accelerates operating systems, virtualization workloads, databases, and other data-intensive applications while helping to reduce power consumption and cooling needs compared to traditional hard drives. Designed to integrate smoothly with Lenovo servers and other enterprise platforms, this SSD is optimized for hot-swappable environments, ensuring minimal downtime during upgrades, replacements, or array maintenance. If you need a dependable upgrade to boost your server performance and reliability, this Lenovo SSD is a strong choice for enterprise storage, RAID configurations, and high-demand workloads.

• High-capacity enterprise storage: 960 GB of solid-state storage provides ample space for operating systems, applications, databases, and data, with fast access times to speed up boot, load, and I/O-heavy operations.
• 2.5-inch form factor with SATA/600 interface: Internal 2.5" drive design compatible with a wide range of servers, storage arrays, and workstations using SATA III (SATA 6Gb/s) interfaces for broad deployment options.
• Hot-swappable design for minimal downtime: Engineered for seamless hot-swapping in servers and RAID environments, enabling quick maintenance and upgrades without interrupting critical workloads.
• Enterprise endurance: 3 DWPD: Built to endure write-intensive workloads with sustained reliability, making it suitable for 24/7 server operations, data centers, and virtualized environments.
• Server-ready reliability and compatibility: Specifically targeted at server devices and enterprise deployments, delivering consistent performance, compatibility with Lenovo ecosystems, and optimized firmware for enterprise workloads.

Technical Details of Lenovo 4XB7A38273

• Capacity: 960 GB
• Drive Type: Solid State Drive (SSD)
• Form Factor: 2.5-inch internal
• Interface: SATA III (SATA/600), 6.0 Gb/s
• Endurance: 3 DWPD (drive writes per day)
• Environment: Enterprise-grade, optimized for server workloads
• Hot-Swappable: Yes, suitable for hot-replace operations in RAID and server backplanes
• Server Device Supported: Yes, designed for server use and enterprise deployments

How to install Lenovo 4XB7A38273

Installing the Lenovo 4XB7A38273 SSD is straightforward in compatible servers, storage arrays, or workstations that support a 2.5-inch SATA drive. Follow these general steps to ensure a smooth, reliable installation:

• Power down the system and disconnect all power sources. Ground yourself to prevent static electricity from harming components.
• Open the server or storage chassis and locate an available 2.5-inch drive bay or drive tray compatible with SATA drives.
• If your system uses drive trays, remove the empty tray, attach the Lenovo 4XB7A38273 into the tray using the standard mounting screws, and secure the drive firmly in place.
• Slide the drive (with its tray) into the backplane or SATA backplane port until it seats fully. Ensure the connectors are properly aligned with the backplane or data/power cables.
• Reconnect power and data cables (or reinsert the drive tray and screw it back into the chassis). If using a RAID controller, verify that the controller supports SATA SSDs and recognizes the new drive.
• Power on the system and enter the BIOS/UEFI or RAID controller utility. Confirm that the new SSD is detected and configured as needed, then initialize, format, or add it to a storage pool/RAID array according to your workflow requirements.
• Boot into the operating system and perform any required partitioning or filesystem setup. Update firmware if a newer version is available from Lenovo or the server vendor.

Frequently asked questions

• What capacity is the Lenovo 4XB7A38273? Это 960 GB of solid-state storage designed for enterprise workloads.
• What interface does it use? It uses a SATA III interface (SATA/600) with a 2.5-inch form factor, suitable for many servers and storage systems.
• Is this drive hot-swappable? Yes. It is designed for hot-swappable operation in server environments and RAID arrays, allowing maintenance without powering down the system.
• What is the endurance rating? The drive is rated for 3 DWPD (drive writes per day), making it appropriate for write-heavy, 24/7 workloads in data centers and enterprise deployments.
• Is this drive compatible with Lenovo servers? Yes. The Lenovo 4XB7A38273 is intended for server devices and enterprise deployments, including Lenovo ecosystems, and is suitable for integration with compatible Lenovo server configurations.