Lenovo 4XB7A38275 3.84 TB SATA Enterprise SSD — 2.5" Internal, Hot-Swappable

Discover scalable, server-grade storage with the Lenovo 4XB7A38275 3.84 TB solid state drive. Engineered for reliability in data centers and enterprise environments, this 2.5-inch internal SSD leverages the SATA (SATA/600) interface to deliver consistent performance across demanding workloads. With a formidable 3.84 TB capacity, it enables dense storage of databases, virtual machines, backups, media libraries, and large-scale analytics data while maintaining low latency and sustained throughput. Built for server deployments, it supports hot-swappable operation to minimize downtime and maximize operational efficiency—perfect for maintenance windows, hardware refreshes, and high-availability configurations. The drive’s endurance rating and enterprise-grade features are designed to support 24/7 workloads, helping organizations achieve predictable performance, accelerated data access, and lower total cost of ownership. Whether you’re upgrading an existing rack, expanding a storage array, or deploying a new server solution, Lenovo’s enterprise SSD combines capacity, endurance, and compatibility to handle modern business data with confidence.

• High-capacity 3.84 TB internal SSD designed for dense server storage and expansive data repositories, enabling large-scale databases, virtualization, and multimedia archives.
• 2.5-inch form factor with SATA 6Gb/s (SATA/600) interface for broad compatibility with a wide range of server chassis, backplanes, and RAID controllers.
• Endurance rated for enterprise workloads with 3 DWPD (drive writes per day), delivering reliable daily writes over years of operation under sustained load.
• Hot-swappable design for minimal downtime in data centers and servers—swap drives without powering down the system and maintain high availability.
• Optimized for server workloads with consistent performance, strong IOPS, and enterprise-grade reliability to support mission-critical apps, databases, and virtual environments.

Technical Details of Lenovo 4XB7A38275

• Capacity: 3.84 TB
• Form factor: 2.5-inch
• Interface: SATA 6Gb/s (SATA/600)
• Endurance: 3 DWPD
• Drive type: Internal, hot-swappable enterprise SSD
• Supported environment: Server and data center workloads requiring reliable, scalable storage

how to install Lenovo 4XB7A38275

Installing the Lenovo 4XB7A38275 in a compatible server is straightforward and designed to minimize downtime. Start by confirming compatibility with your server’s drive bay, RAID controller, and firmware version. If your environment supports hot-swapping, you can replace or add drives without powering down the system; otherwise, plan a maintenance window for a safe shutdown. Follow these steps for a smooth installation:

• Power down or prepare the server for hot-swapping according to your vendor’s guidelines. If using a hot-swap bay, the system may remain powered on while you replace or insert the drive.
• Identify an available drive bay that matches the 2.5-inch form factor. Ensure the bay is designed for SATA drives and is compatible with your storage enclosure or server backplane.
• Insert the Lenovo 4XB7A38275 with the label facing outward and align it with the bay guides. Gently slide the drive into place until it seats securely in the backplane or mounting bracket.
• Secure the drive with any required screws or retention mechanisms, then connect the SATA data and power interfaces through the backplane or directly to the motherboard/RAID controller as applicable.
• Power on the server (or allow hot-swap automation to complete). Enter the server BIOS or RAID controller management utility to detect the new drive. Initialize the drive if required, and configure it into an existing array or create a new logical volume as part of your storage policy.
• Update firmware if prompted and monitor SMART attributes to ensure health and performance. Run a basic integrity check and perform any preferred formatting or partitioning before deploying workloads.

Tips for best results include ensuring firmware alignment across drives in the same array, following recommended RAID configurations, and maintaining recommended operating temperatures and airflow for your server environment. Always back up critical data before modifying storage arrays, and consult Lenovo’s hardware maintenance manuals for model-specific guidance. The Lenovo 4XB7A38275 is designed to integrate seamlessly into enterprise storage configurations, delivering predictable performance gains and the reliability required for business-critical applications.

Frequently asked questions

• Q: What is the capacity of Lenovo 4XB7A38275?
• A: The drive offers 3.84 TB of internal storage capacity in a 2.5-inch form factor with a SATA interface.
• Q: What interface does this drive use?
• A: It uses the SATA 6Gb/s (SATA/600) interface, suitable for a wide range of servers and storage backplanes.
• Q: Is this drive hot-swappable?
• A: Yes, the Lenovo 4XB7A38275 is designed for hot-swappable operation in compatible servers, enabling drive replacement without downtime.
• Q: What is the endurance rating?
• A: It has an endurance rating of 3 DWPD (drive writes per day), making it appropriate for sustained enterprise workloads.
• Q: What workloads is this drive best suited for?
• A: It is ideal for server and data center needs, including databases, virtualization, large-scale backups, content repositories, and analytics workloads requiring reliable, scalable storage.
• Q: How do I install or replace this drive?
• A: Install or replace using a compatible 2.5-inch drive bay, following hot-swap procedure if supported, and configure the drive in your RAID/controller management utility after it’s detected by the system. Always refer to your server’s maintenance guide for exact steps and safety precautions.