Lenovo D3-S4610 3.84 TB SATA SSD for Data Center

The Lenovo D3-S4610 3.84 TB Solid State Drive is a purpose-built, enterprise-class 3.5" internal SSD designed to fit seamlessly into Lenovo server environments. Engineered for mixed-read/write workloads, this drive delivers sustained performance, robust endurance, and strong data protection to meet the demands of data centers, virtualization, databases, and mission-critical applications. Built on the proven Intel S4610 mainstream SATA SSD technology and rebranded for Lenovo, the D3-S4610 combines optimized firmware, wear-leveling efficiency, and comprehensive data-protection features to minimize downtime and maximize application throughput. With a substantial 3.84 terabytes of flash capacity, administrators gain the bandwidth and capacity needed to consolidate workloads, accelerate workloads, and improve storage utilization while keeping total cost of ownership favorable. Whether you’re optimizing databases, accelerating virtualized environments, or implementing mixed workloads across Lenovo infrastructure, this drive supports enterprise-grade reliability and performance over the long term.

• Optimized for mixed read/write workloads with low latency and consistent throughput, delivering responsive performance for a range of enterprise applications.
• Enterprise-grade endurance and data protection features designed for Lenovo server deployments, helping to minimize downtime and safeguard data integrity under heavy usage.
• High-capacity 3.84 TB in a 3.5-inch form factor, enabling greater storage density and simplified scaling within existing Lenovo server bays.
• SATA interface (SATA/600) provides broad compatibility with standard server hardware while delivering reliable performance for mixed-workload environments.
• Designed for seamless integration into Lenovo data-center ecosystems, offering streamlined deployment, improved manageability, and robust lifecycle support for enterprise IT.

Technical Details of Lenovo D3-S4610 3.84 TB Solid State Drive

• Capacity: 3.84 TB
• Form Factor: 3.5-inch internal drive
• Interface: SATA (SATA/600)
• Drive Type: Mixed-use enterprise SATA SSD
• Target Environment: Data center workloads, Lenovo servers, mixed read/write applications
• Reliability and Protection: End-to-end data protection, wear leveling, Error Correction Code (ECC) and other enterprise-grade reliability features

how to install Lenovo D3-S4610 3.84 TB Solid State Drive

• Power down the server completely and unplug all power sources. Ground yourself to avoid static discharge before handling the drive.
• Open the server chassis and locate an available 3.5-inch drive bay that supports SATA drives.
• Remove the drive sled or tray, if applicable, and align the D3-S4610 with the tray’s mounting holes. Secure the drive with the appropriate screws to ensure a stable installation.
• Connect the SATA data cable to the drive and the motherboard or PCIe/SATA controller, and connect the corresponding power cable from the power supply to the drive.
• Insert the drive tray back into the server, firmly seating it in the drive bay. Reassemble the chassis and reconnect power.
• Power on the server and enter the BIOS/UEFI or storage controller configuration utility. Confirm that the new D3-S4610 is detected and, if necessary, configure it for your preferred RAID/array setup or as a standalone drive.
• Initialize and format the new drive within your operating system or storage management software. Ensure proper partitioning, alignment, and performance optimization for your workloads.

Frequently asked questions

• Q: What is the Lenovo D3-S4610 3.84 TB SSD best suited for?
  A: It is designed for data centers and Lenovo server environments that require reliable mixed-read/write performance, high endurance, and strong data protection for workloads such as databases, virtualization, and general enterprise storage.
• Q: Is this drive compatible with Lenovo servers?
  A: Yes. The D3-S4610 is intended for Lenovo server deployments and is optimized to integrate with Lenovo infrastructure, delivering enterprise-grade reliability and performance in Lenovo ecosystems.
• Q: What endurance and protection features does it offer?
  A: The drive emphasizes endurance and data protection through enterprise-grade firmware, wear leveling, ECC, and end-to-end protection, helping minimize drive wear and protect data integrity during heavy workloads.
• Q: How do I upgrade or replace drives in a Lenovo server?
  A: Power down the system, remove the existing drive from its bay, install the D3-S4610 into an available 3.5-inch bay, connect SATA power and data, and configure in the server’s storage controller or BIOS/UEFI as part of an array or standalone volume, followed by OS initialization and partitioning as needed.
• Q: What kind of workloads benefit most from this 3.84 TB SATA SSD?
  A: Mixed-read/write workloads, virtualization storage, database acceleration, and dense, scalable data-center storage solutions benefit from the combination of capacity, performance, and reliability offered by this drive.