Lenovo D3-S4610 480 GB SATA SSD — 2.5" Internal, Mixed-Use Data Center Drive

The Lenovo D3-S4610 480 GB solid-state drive is designed for demanding data-center workloads and Lenovo server environments. This 2.5-inch internal SSD uses a SATA III (SATA/600) interface to deliver reliable, mixed-read/write performance with strong endurance and data protection. Built for steady, long-haul operation in 24/7 settings, it’s engineered to accelerate boot times, virtualization, databases, and application workloads while reducing power consumption and cooling needs compared with traditional hard drives. Whether you’re refreshing legacy servers or deploying high-availability storage for modern infrastructures, the D3-S4610 is crafted to fit seamlessly into Lenovo ecosystems and other 2.5" SATA-enabled systems.

• Optimized for mixed read/write workloads with low latency, delivering balanced performance for operating systems, applications, and data-tier tasks.
• 480 GB capacity provides ample room for OS, virtualization images, databases, and frequently accessed data in enterprise environments.
• 2.5" internal form factor with a SATA III (SATA/600) interface ensures straightforward integration into standard server bays and storage enclosures.
• Enterprise-grade reliability features boost endurance and data integrity, including wear leveling, error detection, and protection mechanisms for sustained durability under heavy workloads.
• Designed for Lenovo servers and other 2.5" SATA-compatible systems, offering consistent performance, simplified management, and long-term vendor support for data-center deployments.

Technical Details of Lenovo D3-S4610 480 GB SSD

• Capacity: 480 GB
• Interface: SATA III (SATA/600)
• Form Factor: 2.5" internal
• Drive Type: Solid State Drive (SSD) for enterprise, mixed-use workloads
• Usage: Optimized for data-center needs, including Lenovo server environments and other 2.5" SATA-enabled systems

How to install Lenovo D3-S4610 480 GB SSD

• Power down the server or computer and unplug all power sources before handling the hardware.
• Open the chassis and locate an available 2.5" drive bay or drive tray compatible with your system.
• Mount the D3-S4610 into the drive tray, securing it with screws or using the appropriate tool-free mounting mechanism.
• Connect the SATA data cable from the motherboard or SATA controller to the SSD and attach the power connector from the power supply.
• Secure the drive tray back into the chassis, reassemble the system, and power on. Enter the BIOS/UEFI to verify the drive is detected, then boot into your operating system to format and initialize the drive as needed.

Frequently asked questions

• Q: Is the Lenovo D3-S4610 compatible with Lenovo servers? A: Yes. The D3-S4610 is designed for Lenovo server ecosystems and works with standard 2.5" SATA bays found in many enterprise-grade servers and storage enclosures.
• Q: What workloads is this drive best suited for? A: It is optimized for mixed read/write workloads, including operating system boot drives, virtualization hosts, databases, and other demanding data-center applications that benefit from predictable latency and steady throughput.
• Q: What warranty comes with this SSD? A: Warranty terms vary by retailer and region. Enterprise-grade SSDs like the D3-S4610 are typically covered by multi-year warranties and vendor support; check the specific warranty with your supplier at the time of purchase.
• Q: How can I maximize performance and longevity? A: Keep firmware up to date, use a compatible SATA controller, ensure adequate cooling in dense server environments, and follow best practices for enterprise SSD management such as monitoring health, wear levels, and SMART attributes.
• Q: Can this drive be used for both Windows and Linux servers? A: Yes. SATA-based SSDs like the D3-S4610 are compatible with common server operating systems, but always verify driver compatibility and firmware requirements for your specific setup.