Lenovo DC P4610 3.20 TB NVMe SSD for Data Center — 2.5" Internal U.2, PCIe 3.0 x4, Mixed Use

The Lenovo DC P4610 3.20 TB Solid State Drive is engineered for demanding data-center workloads, delivering dependable mixed read/write performance, high endurance, and robust data protection within a cost-efficient design. Built to integrate seamlessly with Lenovo ThinkSystem servers, this 2.5-inch internal NVMe SSD leverages the U.2 interface and PCIe 3.0 x4 to accelerate applications ranging from database operations and virtualization to analytics and dense storage workloads. If you’re looking to scale capacity without sacrificing latency or reliability, the P4610 is designed to meet the needs of modern enterprise environments while optimizing total cost of ownership.

Designed for mixed-use workloads, the P4610 merges substantial capacity with fast, consistent I/O. It’s optimized to handle sustained workloads that alternate between reads and writes, making it an excellent choice for environments that demand both throughput and endurance. In data-center deployments, this drives faster boot storms, smoother database queries, and improved responsiveness in virtualized platforms. Lenovo’s engineering emphasizes data integrity and protection, helping to guard critical business data while maintaining predictable performance even as workload profiles shift over time.

With a 3.20 TB capacity in a familiar 2.5-inch form factor, the P4610 fits into standard enterprise drive bays offering straightforward upgrade paths for expanding storage pools or refreshing aging NAND. The drive’s NVMe protocol over PCIe 3.0 x4 unlocks higher bandwidth and significantly lower latency than traditional SATA-based SSDs, enabling rapid data access and reduced I/O wait times for workloads that demand quick response times. For administrators, these characteristics translate into faster application performance, improved time-to-insight for data analytics, and a smoother experience in virtualized environments where storage latency can influence overall system throughput.

Security and data protection are cornerstones of enterprise NVMe storage, and the P4610 is built to support such requirements in Lenovo server ecosystems. Expect robust data protection features and reliable operation that helps preserve data integrity, even under heavy load. The drive is optimized to work within Lenovo ThinkSystem solutions, ensuring compatibility with Lenovo firmware, management tools, and service ecosystems that enterprises rely on for uptime and efficiency. This makes the P4610 a practical choice for organizations standardizing their storage infrastructure on Lenovo hardware while seeking a scalable, future-proof NVMe solution.

• High-performance mixed-use NVMe SSD: Optimized for read/write balance to deliver strong throughput across diverse business applications and databases without compromising latency.
• Massive capacity in a 2.5" form factor: 3.20 TB of storage density in a familiar enterprise drive shape, enabling streamlined upgrades and dense server configurations.
• U.2 internal interface for data-center readiness: 2.5-inch internal drive with U.2 (SFF-8639) compatibility, suitable for Lenovo ThinkSystem servers and other enterprise platforms.
• NVMe over PCIe 3.0 x4 for low latency: Fast PCIe connectivity delivers low I/O latency and high sequential/RAN performance essential for modern workloads.
• Designed for enterprise reliability and data protection: Engineered to support data-center reliability, endurance, and protection features to safeguard mission-critical data in demanding environments.

Technical Details of Lenovo DC P4610 3.20 TB Solid State Drive - 2.5" Internal - U.2 (SFF-8639) NVMe (PCI Express 3.0 x4) - Mixed Use

• Capacity: 3.20 TB
• Form Factor: 2.5" Internal
• Interface: U.2 (SFF-8639)
• NVMe Protocol: NVMe over PCIe
• PCIe Version/Lanes: PCI Express 3.0 x4
• Workload Type: Mixed Use
• Intended for Lenovo ThinkSystem servers and compatible data-center deployments

How to install Lenovo DC P4610

Installing the Lenovo DC P4610 NVMe SSD is straightforward in supported data-center systems. Follow these general steps to add or upgrade storage in a compatible server chassis that provides U.2 drive bays and support for NVMe drives:

1. Power down the server and disconnect power to ensure safe handling of internal components. If you are performing a hot-swap upgrade in a system that supports it, consult your server manual for hot-swap procedures and adhere to proper ESD precautions.

2. Identify an available 2.5" drive bay or U.2 slot in the server chassis. Confirm that the system supports NVMe drives and U.2 (SFF-8639) connectivity, and verify firmware compatibility with Lenovo ThinkSystem guidance.

3. Insert the P4610 drive into the U.2 connector or drive cage, aligning pins and seating the drive firmly in the slot. Secure the drive with the appropriate screws or retention mechanism as specified by the server housing.

4. Connect the U.2 data and power cables to the drive and motherboard or backplane as required by your server model. Ensure all connections are snug and that the cables are routed to avoid interference with fans or cooling pathways.

5. Power on the server. Enter the system BIOS/UEFI and verify that the new NVMe drive is detected. If prompted, update the firmware on the P4610 to the latest Lenovo-approved version to ensure optimal performance and reliability.

6. In your operating system, initialize and format the new drive as needed, then integrate it into your storage pools, databases, or virtualization environment. Depending on your deployment, you may configure NVMe namespaces, enable enterprise features, or align the drive with existing storage policies for performance and protection.

To realize the full potential of the P4610, follow Lenovo’s best practices for NVMe deployment: verify firmware compatibility across the storage stack, implement appropriate data-protection policies, and monitor drive health and endurance using Lenovo management tools. This approach helps ensure consistent performance, reduces unplanned downtime, and extends the value of your storage investment across your data center.

Frequently asked questions

• What is the capacity of this Lenovo DC P4610 drive? The drive offers 3.20 TB of storage capacity, providing substantial space for mixed-read/write workloads in data-center environments.
• What form factor and interface does it use? It is a 2.5-inch internal drive with a U.2 interface (SFF-8639), designed for enterprise servers and storage backplanes that support NVMe over PCIe.
• What workloads is the P4610 best suited for? It is optimized for mixed-use workloads, including databases, virtualization, analytics, and other data-center tasks that benefit from high throughput and low latency while balancing endurance.
• Which servers is it compatible with? The P4610 is designed for Lenovo ThinkSystem servers and other enterprise platforms that support U.2 NVMe drives. Always verify compatibility with your specific server model and firmware version.
• How do I maximize performance and reliability? Use Lenovo’s recommended firmware, integrate the drive into properly configured storage pools, enable enterprise features related to data protection, and monitor health metrics with Lenovo management tools for proactive maintenance.