Lenovo PM983 3.84 TB NVMe PCIe 3.0 x4 3.5" Internal SSD

The Lenovo PM983 3.84 TB NVMe PCIe 3.0 x4 solid-state drive is engineered for data centers that demand both capacity and speed in a compact, enterprise-grade package. Designed for System x and ThinkServer ecosystems, this 3.5-inch internal SSD delivers the performance advantages of NVMe over PCIe while offering the endurance and reliability required for continuous operation in demanding workloads. With a generous 3.84 terabytes of capacity, the PM983 empowers IT teams to consolidate workloads, accelerate databases, and host virtual machines with fewer drives, reducing rack density, power consumption, and overall hardware footprint. This drive is a cost-efficient way to unlock faster boot times, quicker application load, and snappier data access for analytics, AI workloads, and heavy I/O environments while maintaining strong data protection and serviceability in the enterprise.

• Massive capacity for data-intensive workloads: 3.84 TB of storage in a 3.5-inch form factor enables dense server configurations, large databases, and virtualization projects without sacrificing performance.
• High-performance NVMe over PCIe 3.0 x4: Delivers low latency and superior IOPS to accelerate apps, databases, analytics, and virtualization workloads compared with older SATA/SAS SSDs.
• Enterprise-grade endurance and reliability: Built for sustained, heavy-duty use in data centers with endurance and reliability features designed to withstand continuous operation and write-intensive tasks.
• Designed for Lenovo System x and ThinkServer environments: Optimized compatibility with Lenovo server families, backplanes, and management ecosystems for straightforward deployment.
• Trusted Lenovo support and service: Backed by Lenovo’s enterprise warranty and service programs, ensuring ongoing performance and availability.

Technical Details of Lenovo PM983 3.84 TB Solid State Drive - 3.5" Internal - PCI Express (PCI Express 3.0 x4)

• Capacity: 3.84 TB
• Form factor: 3.5-inch internal SSD
• Interface: PCIe 3.0 x4
• Protocol: NVMe
• Workload suitability: Enterprise data center use cases including databases, virtualization, and high-IOPS applications
• Endurance and reliability: Enterprise-grade endurance with data-protection features suitable for sustained workloads
• Compatibility: Optimized for Lenovo System x and ThinkServer platforms and related storage backplanes and firmware environments
• Protection features: Supports reliability mechanisms common to enterprise NVMe drives to safeguard data integrity during power loss and abrupt shutdowns

How to install Lenovo PM983

Installing the Lenovo PM983 is a straightforward process when performed in a supported Lenovo System x or ThinkServer environment. Follow these steps to ensure a smooth deployment and reliable operation:

• Power down the server and disconnect the power cables. If your chassis supports hot-swapping, verify the drive bays and backplane compatibility before removing any component.
• Open the server chassis and locate an available 3.5-inch drive bay or backplane slot that accepts PCIe NVMe 3.0 x4 devices. Remove the blank or existing drive carrier if necessary.
• Secure the PM983 into the drive carrier or sled, aligning the connector with the backplane interface. Use the appropriate screws or retention mechanism to secure the drive firmly in place.
• Connect the PCIe/NVMe interface to the server backplane. If your system uses a hot-swap backplane, ensure the drive is properly seated and latched.
• Reinstall the drive carrier into the server chassis, close the chassis, and reconnect power. Power on the system and enter the system BIOS/UEFI.
• In BIOS/UEFI, verify that the PM983 is detected as an NVMe device. If required, set the appropriate boot order or storage controller options for your deployment.
• Once the operating system boots, initialize and format the drive according to your storage plan. Install any necessary firmware updates or Lenovo management tools to monitor health, wear, and performance.
• Conduct a basic performance and health check to confirm that the drive is operating correctly within your storage array or server environment. Enable any recommended SMART monitoring and drive health alerts.

Frequently asked questions

• Q: What is the Lenovo PM983 used for? A: The PM983 is an enterprise-grade NVMe SSD designed to deliver high performance and large capacity for data centers. It is suitable for databases, virtualization, analytics, operating system drives, and general-purpose storage in Lenovo System x and ThinkServer environments.
• Q: What interface and form factor does it use? A: It uses a PCIe 3.0 x4 interface in a 3.5-inch internal drive form factor, making it compatible with servers that support 3.5-inch NVMe drives and PCIe backplanes.
• Q: Is the PM983 hot-swappable? A: In compatible Lenovo server configurations with hot-swap drive bays and backplanes, the PM983 can be installed or replaced without powering down the entire system, subject to your server’s maintenance procedures.
• Q: What workloads are ideal for this drive? A: Enterprise databases, virtualization, large-scale analytics, AI preprocessing, high-IOPS applications, and large OS or application boot drives are well-suited to the PM983’s capabilities.
• Q: What kind of support does Lenovo provide? A: Lenovo offers enterprise-grade warranty and service options for the PM983, with terms determined by your purchase and region. Check Lenovo’s support portal for the exact coverage in your contract.