Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 Kit

The Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 kit is a purpose-built expansion solution that unlocks additional PCIe connectivity in compact, space-conscious ThinkSystem 1U servers. Designed to deliver reliable, low-profile PCIe expansion in Lenovo data center hardware, this riser opens up room for essential add-in cards while preserving airflow, cabling routing, and system integrity. Ideal for data centers and workloads that demand flexible hardware configuration, this kit helps you maximize server versatility without compromising rack space or performance.

• Expanded PCIe capacity for SR530 and SR570: Adds a dedicated PCIe 3.0 x8 lane via a low-profile riser, enabling the installation of NVMe SSDs, network adapters, or other PCIe devices in supported ThinkSystem servers.
• PCIe 3.0 x8, low-profile form factor: The 1.0 x PCI Express 3.0 x8 interface is packaged in a compact, low-profile card that fits into tight 1U chassis environments without interfering with other components.
• Optimized for Lenovo ThinkSystem SR530/SR570: Specifically engineered for these Lenovo servers to ensure compatibility, alignment, and reliable operation within Lenovo’s validated server ecosystem.
• Durable design for data center reliability: Built to meet enterprise-grade standards for vibration, thermal performance, and long-term operation in 24/7 environments, helping you maintain uptime.
• Easy integration with minimal downtime: The riser is designed to streamline installation, minimize cabling complexity, and preserve airflow, so you can upgrade your system with reduced service disruption.

Technical Details of Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 kit

• Riser specification: 1.0 x PCI Express 3.0 x8 (Low-profile)
• Riser type: PCIe LP Riser 2 kit
• Form factor: Low-profile PCIe riser card suitable for 1U chassis
• Compatibility: Lenovo ThinkSystem SR530 and SR570 servers
• Key characteristics: High-bandwidth PCIe x8 link, space-efficient design, engineered for Lenovo server ecosystems
• Notes: This kit focuses on providing a physical PCIe x8 lane expansion; confirm PCIe device compatibility and BIOS/firmware settings for your specific workload

how to install Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 kit

• Power down the server completely and unplug from all power sources. Ground yourself to prevent static discharge.
• Remove the chassis cover and locate the PCIe slot area and the existing riser or expansion slot configuration as specified by Lenovo service documentation for SR530 or SR570 models.
• If an existing riser is installed, carefully detach or reposition it according to Lenovo’s maintenance procedures, keeping track of screws and mounting brackets.
• Align the Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 kit with the motherboard PCIe connector. Gently seat the riser into the slot until it is firmly seated and seated level with the chassis. Do not force the connector, and ensure there is no visible gap.
• Secure the riser with the appropriate mounting screws or brackets as required by the server chassis. Route any cables cleanly to avoid obstruction to fans and airflow paths.
• Reinstall the server cover, reconnect power, and boot the system. Enter the BIOS/UEFI to verify that the PCIe x8 lane is detected and that the new expansion is recognized by the system.
• Install or update drivers as needed for the PCIe device you plan to use (e.g., NVMe controller, network card). Confirm device visibility within the operating system and run a basic initialization test to ensure proper function.

Frequently asked questions

• Q: What is Lenovo ThinkSystem SR530/SR570 x8 PCIe LP Riser 2 kit?

  A: It is a low-profile PCIe expansion riser designed to provide an additional PCIe x8 lane in Lenovo ThinkSystem SR530 and SR570 servers, enabling the installation of PCIe devices in compact 1U chassis.

• Q: Which systems are compatible with this riser?

  A: The kit is specifically designed for Lenovo ThinkSystem SR530 and SR570 servers. Check with Lenovo support to confirm compatibility with your exact hardware revision or firmware.

• Q: What PCIe specification does it use?

  A: It supports PCIe 3.0 with a single x8 lane (x8 link) via a low-profile riser configuration, offering solid bandwidth for supported PCIe devices.

• Q: Do I need downtime to install this riser?

  A: Yes. Installation requires powering down the server and performing maintenance in a controlled environment. Plan for a maintenance window to minimize impact on operations.

• Q: What should I do if the new PCIe device is not detected after installation?

  A: Verify that the riser is correctly seated, reseat if necessary, and ensure BIOS/firmware settings recognize the PCIe lane. After BIOS confirmation, install or update drivers in the operating system. If issues persist, contact Lenovo support for guidance.