Lenovo ThinkSystem V3 1U x16/x16 PCIe Gen4 Riser1 LP+LP Option Kit

The Lenovo ThinkSystem V3 1U x16/x16 PCIe Gen4 Riser1 LP+LP Option Kit is a purpose-built expansion solution for Lenovo ThinkSystem V3 1U servers. Designed to unlock high-bandwidth I/O by delivering two PCIe Gen4 x16 lanes in a compact, low-profile form factor, this riser kit enables robust expansion for GPUs, NICs, NVMe controllers, and other PCIe devices without sacrificing 1U chassis airflow or reliability. Built for data centers, HPC clusters, and enterprise environments, the Riser1 LP+LP Option Kit combines Lenovo’s engineering discipline with PCIe Gen4 performance to deliver scalable performance in a dense, space-constrained footprint. Whether upgrading a single node or provisioning a dense compute rack, this kit provides a straightforward, dependable path to enhanced I/O throughput and system versatility.

• Dual PCIe Gen4 x16 slots: expands I/O bandwidth to two PCIe devices simultaneously, ideal for GPUs, accelerators, high-speed NICs, and storage controllers.
• Low-profile LP+LP design: tailored for Lenovo ThinkSystem V3 1U chassis, preserving airflow and avoiding clearance issues in tight 1U spaces.
• PCIe Gen4 bandwidth: delivers full Gen4 performance across both x16 slots, enabling rapid data transfer and reduced bottlenecks for demanding workloads.
• Plug-and-play compatibility: engineered for seamless integration with ThinkSystem V3 1U servers, featuring standard connectors and mounting provisions for reliable operation.
• Enterprise-grade reliability: rugged, server-grade construction with attention to EMI, thermal management, and long-term data center durability.

Technical Details of Lenovo ThinkSystem V3 1U x16/x16 PCIe G4 Riser1 LP+LP Option Kit

• Riser type: LP+LP low-profile dual x16 PCIe Gen4 riser
• PCIe version: PCI Express 4.0 (Gen4)
• Slot configuration: 2 x PCIe 4.0 x16 Gen4 slots
• Form factor: 1U PCIe riser kit designed for Lenovo ThinkSystem V3 1U servers
• Compatibility: ThinkSystem V3 1U chassis and supported server motherboards per Lenovo documentation

How to install Lenovo ThinkSystem V3 1U x16/x16 PCIe G4 Riser1 LP+LP Option Kit

• Power down the server and disconnect it from power. Ground yourself to prevent electrostatic discharge (ESD) before handling components.
• Remove the chassis cover or access panel to expose the motherboard and PCIe riser area, following the Lenovo ThinkSystem service guide for your specific model.
• Locate the designated PCIe riser connectors and the mounting points for the Riser1 LP+LP kit. Verify that the chassis clearance and backplane support dual x16 expansion cards.
• Align the riser connectors with the motherboard riser slots and firmly seat the Riser1 LP+LP into place. Ensure full engagement with the connectors and that the riser sits flush against the mounting points.
• Secure the riser bracket with the supplied screws or fasteners, as specified in the ThinkSystem hardware manual. Double-check that no cables or cards interfere with the riser’s position.
• Install the PCIe expansion cards into the riser slots as required (GPU, NIC, NVMe controller, etc.), making sure each card is fully seated and properly latched.
• Replace the chassis cover, reconnect power, and boot the server. Enter the BIOS/UEFI to confirm that the newly installed PCIe devices are recognized and configured correctly. Install any necessary drivers or firmware updates from Lenovo or the device manufacturers.
• Once configured, monitor system temperatures and performance to ensure that cooling remains adequate and no thermal throttling occurs in the 1U chassis.

Frequently Asked Questions

Is this riser kit compatible with all Lenovo ThinkSystem V3 1U servers?

The Lenovo ThinkSystem V3 1U x16/x16 PCIe Gen4 Riser1 LP+LP Option Kit is designed for ThinkSystem V3 1U servers and related chassis that support LP+LP dual x16 PCIe Gen4 risers. Always verify compatibility with your exact server model and chassis revision in the official Lenovo documentation or by checking the product listing from Lenovo/ThinkSystem support resources before purchasing.

What type of PCIe devices can I install with this kit?

The kit provides two PCIe Gen4 x16 expansion slots, suitable for high-bandwidth devices such as GPUs, PCIe NVMe storage controllers, high-speed NICs, or accelerator cards. Compatibility depends on the server’s BIOS/firmware, power budget, and physical clearance within the 1U chassis.

Does installing this riser require any BIOS or firmware updates?

In many deployments, the riser will function with existing BIOS/firmware, but for optimal compatibility and performance—especially with newer GPUs or accelerators—Lenovo may recommend firmware or driver updates. Consult Lenovo ThinkSystem documentation and the device driver sources to ensure proper support.

Do I need special tools to install the riser kit?

Typically, a standard screwdriver is sufficient to secure the riser bracket to the chassis. Follow the Lenovo service guide for your model to ensure correct alignment and torque specifications.

Where can I find the official specifications and compatibility notes?

Official specifications and compatibility notes are available through Lenovo ThinkSystem product documentation and authorized vendor listings (such as the Synnex/EC listings). Always refer to Lenovo’s certified documentation for precise model-by-model compatibility and installation guidance.