Lind Electronics 12-32Vin, 19V/5A Out Power Solution for Getac V200 and More

When field reliability matters, you need a power solution that can keep up with rugged workloads and demanding deployments. The Lind Electronics 12-32Vin input with a precise 19V/5A output is built to deliver clean, stable power to Getac V200 notebooks and a wide range of other rugged devices that require a consistent 19V supply. This compact, purpose-built power supply excels in vehicles, fleets, emergency response, field service, and industrial environments where voltage can swing, engines start/stop, or power hubs are in constant use. The result is a dependable, plug-and-play solution that minimizes downtime, extends device uptime, and reduces the need for improvised power adapters in the field. With a focus on practical field performance, the Lind Electronics unit converts a broad 12-32V DC input into a regulated 19V output, delivering the amperage required by devices like the Getac V200 while maintaining voltage stability even as the vehicle’s electrical system experiences load changes. The rugged construction is designed to withstand vibration, temperature variation, and the everyday bumps of on-the-road duty cycles, while the compact footprint makes installation in crowded vehicle cabins, equipment bays, or power distribution panels straightforward. In addition to reliable output, the power supply emphasizes safety and efficiency, using protective features to guard against short circuits, over-current events, and thermal overload—critical factors when powering essential devices in remote locations. This makes it not just a charger, but a durable, dependable power backbone for your Getac V200 and other 19V devices, ensuring crisp boot-ups, steady data transmission, consistent device performance, and longer uninterrupted operation between charges. Fleet operators, field technicians, and IT departments value a solution that is easy to install, simple to deploy across multiple vehicles or work sites, and reliable across a wide range of environmental conditions. The Lind Electronics design combines intelligent regulation with robust engineering so your equipment can run at peak efficiency, with minimal heat generation and reduced strain on the vehicle’s electrical system. This translates to lower energy waste, better overall system performance, and fewer surprises during critical missions where uptime is essential. Whether you’re mounting it under a dashboard, within a rugged communications rack, or behind a workstation in a mobile command center, this power supply is engineered to fit into real-world workflows without the complexity of bespoke power assemblies. The Getac V200 is known for its rugged performance, long battery life, and ability to operate in challenging weather, and this Lind Electronics unit is purpose-built to complement that resilience. By providing a stable 19V supply at up to 5A, it keeps data logging, mapping, diagnostics, and field communications uninterrupted, so operators can stay productive even in challenging environments. For teams with multiple devices or shareable fleets, the wide 12-32V input range means a single power solution can service a spectrum of equipment beyond the Getac V200, simplifying procurement, inventory management, and maintenance. The unit’s compact design also enables discreet installation in vehicles, allowing technicians to keep essential tools and devices within reach while maintaining a clean, organized power layout. Finally, the emphasis on safety and reliability aligns with industry best practices for mobile power systems, making this Lind Electronics solution a prudent investment for organizations prioritizing uptime and device longevity. In sum, this is a purpose-built, field-ready power supply that delivers the right voltage at the right time, so Getac V200 and similar rugged devices perform consistently when and where you need them most.

• Wide input range: 12-32V DC input, designed to tolerate the fluctuations and surges common in vehicle and industrial power sources.
• Precise 19V output at up to 5A: provides stable, reliable power to the Getac V200 and other devices that require 19V at high current for peak performance.
• Rugged, compact design: engineered for mobile environments with vibration resistance and a small footprint that fits in tight spaces.
• Built-in safety protections: short-circuit protection, over-current protection, over-voltage protection, and over-temperature safeguards to protect both the power supply and connected equipment.
• Easy integration and deployment: plug-and-play installation with compatible connectors and mounting options, reducing setup time in field conditions.

Technical Details of Lind Electronics 12-32vin, 19v/5aout, Getac V200 Etc

• Input voltage range: 12-32V DC
• Output voltage and current: 19V DC, up to 5A (max 95W)
• Efficiency: typical 85-90% depending on load and conditions
• Protection features: short-circuit, over-current, over-voltage, and over-temperature protection
• Compatibility: designed for Getac V200 and other rugged devices with 19V input requirements

how to install Lind Electronics 12-32vin, 19v/5aout, Getac V200 Etc

• Power down the vehicle or equipment and disconnect the main power source before beginning installation.
• Select a suitable 12-32V DC power source in your vehicle, power well, or industrial rack that meets the input range specifications.
• Connect the unit’s input lead to the 12-32V source, ensuring correct polarity and a secure, clean connection to prevent loose contacts.
• Connect the 19V output lead to the Getac V200 power input or to the device’s compatible power interface, using the appropriate connector and ensuring a solid connection.
• Mount the power supply securely using the supplied hardware or an approved mounting method, and route cables neatly to avoid interference or damage. Verify ventilation and avoid obstructing other components in the vehicle or cabinet.

Frequently asked questions

• Q: What devices is this Lind Electronics power supply compatible with?
• A: It is designed for the Getac V200 and is suitable for other rugged devices that require 19V input at up to 5A. Always verify the exact voltage and current requirements of your device before use.
• Q: What is the input voltage range?
• A: The unit supports a wide input range of 12-32V DC to accommodate vehicles, marine, and industrial power sources.
• Q: Does this power supply protect against power surges?
• A: Yes, it includes protections such as over-current, over-voltage, and short-circuit protection, as well as over-temperature safeguards to prevent damage.
• Q: Can I use it while the vehicle engine is running?
• A: Yes. The design supports continuous operation in mobile settings, including when the engine is running or idling, subject to proper installation and ventilation.
• Q: Is installation difficult?
• A: The unit is designed for quick, tool-friendly installation in minutes. It includes mounting hardware and cables, and requires only basic hand tools for secure mounting.