Micron 5400 PRO 7.68 TB SATA SSD — 2.5" Internal, Read Intensive

The Micron 5400 PRO 7.68 TB SATA SSD is a purpose-built data center storage workhorse engineered for reliability, density, and consistent performance in read-intensive workloads. Built on Micron’s 176-layer 3D NAND technology, this 2.5-inch internal drive delivers enterprise-grade capabilities that modern servers rely on—from database caching and virtualization to scale-out storage and logging pipelines. It combines a proven SATA interface with a dense capacity in a compact form factor, enabling data centers to maximize storage efficiency without sacrificing predictability or longevity. If you’re upgrading outfits of traditional HDDs or expanding a server fleet with high-capacity, low-latency storage, the 5400 PRO is designed to help you lower total cost of ownership while sustaining steady throughput in demanding environments.

• 176-layer 3D TLC NAND — The Micron 5400 PRO leverages Micron’s advanced 176-layer 3D NAND technology, delivering improved endurance, efficiency, and scalable performance. This architectural breakthrough supports dense capacity (7.68 TB) while maintaining reliable read performance under sustained workloads.
• 7.68 TB in a 2.5" internal form factor — Achieve exceptional storage density within a standard 2.5-inch enterprise footprint. The impressive capacity consolidates large datasets, catalogs, caches, and logs into fewer drives, simplifying deployments and reducing rack space requirements.
• SATA/600 interface for broad compatibility — Built for data centers with existing SATA infrastructure, the 5400 PRO uses a SATA 6 Gb/s interface (SATA/600) that balances performance with compatibility across servers, backplanes, and storage enclosures. It’s a practical choice for refreshing aging SATA SSDs or expanding capacity in mixed environments.
• Read-Intensive performance optimized — Designed for read-dominant workloads, the 5400 PRO prioritizes steady, low-latency reads and predictable throughput. It’s ideal for database caches, boot and application caches, content delivery, virtualization support that relies on rapid read access, and streaming scenarios where reads outpace writes.
• Enterprise-grade reliability for data centers — Engineered for continuous server operation, this drive emphasizes reliability, consistent performance, and long-term durability in deployment scenarios where uptime is critical. It’s built to withstand the demanding conditions of modern data centers, from hyperscale racks to remote edge deployments.

Technical Details of Micron 5400 PRO 7.68 TB Solid State Drive

• Capacity: 7.68 TB
• Form Factor: 2.5-inch internal
• Interface: SATA 6 Gb/s (SATA/600)
• NAND: 176-layer 3D TLC
• Workload Type: Read Intensive (RI) data center optimization
• Designed for: Enterprise-grade reliability and sustained performance in server/storage environments
• Max throughput (SATA-limited): Throughput constrained by the SATA interface, typically aligning with standard SATA transfer rates (approximately up to the ~550 MB/s range in ideal conditions)
• Warranty: See Micron specifications for warranty terms and support

How to Install Micron 5400 PRO 7.68 TB Solid State Drive

• Verify compatibility: Confirm your server or workstation supports a 2.5-inch SATA SSD and has available drive bays or hot-swap sleds. Ensure the system firmware and BIOS/UEFI settings accommodate SATA drives in AHCI mode for optimal operation.
• Power down and prepare: Shut down the system, unplug power, and ground yourself to prevent static discharge. Remove the drive bay cover or access panel as required by your chassis.
• Mount the drive: Insert the Micron 5400 PRO into a compatible 2.5-inch drive tray or backplane. Secure with screws or slide it into a hot-swap sled, ensuring a firm connection to the tray and sled.
• Connect interfaces: Attach the SATA data cable and the SATA power connector from the server backplane or PSU. Ensure cables are routed away from heat sources and moving components.
• Configure and initialize: Power on the system. In the BIOS/UEFI, verify the drive is detected. In your operating system, use disk management or a storage management utility to initialize, partition, and format the drive as needed for your workload. If used in a RAID array, follow your RAID controller’s setup procedure.
• Firmware and health checks: Check for any available firmware updates from Micron’s support resources and apply them if recommended. After installation, monitor SMART attributes and drive health to ensure long-term reliability.
• Performance optimization: Enable TRIM, ensure AHCI is active, and align partitions to optimize read performance. Maintain appropriate cooling and airflow in dense server environments to maximize endurance and consistent throughput over time.

Frequently asked questions

• Q: What workloads is the Micron 5400 PRO 7.68 TB best suited for?
  A: It excels in read-intensive data center workloads such as database caching, file and object caching, virtualization read paths, content delivery, and large-scale logging where fast, reliable reads are critical and sustained capacity is needed.
• Q: Is the 5400 PRO compatible with standard SATA infrastructure?
  A: Yes. It uses a SATA 6 Gb/s interface and is designed to operate in servers, backplanes, and workstations that support SATA drives. It can be used as a direct replacement for other SATA SSDs in compatible bays.
• Q: How do I maximize performance and lifespan?
  A: Ensure the drive runs in AHCI mode, enable TRIM, keep firmware up to date, and monitor drive health. Avoid thermal throttling by maintaining adequate cooling, and consider pairing with fast cache-enabled controllers or read-optimized configurations to derive the most benefit in read-heavy workloads.
• Q: What is the main difference between the 5400 PRO and other Micron 5400-series models?
  A: The 5400 PRO is tuned for enterprise-grade read-intensive workloads with a focus on reliability and predictable performance in data center environments. Other models in the 5400 family may target different balance points of performance, endurance, and capacity for varied workloads.
• Q: What kind of warranty or support comes with this drive?
  A: Warranty terms vary by region and distributor. Refer to Micron’s official specifications or your purchasing partner for exact warranty durations and service options. Data-center deployments often align with enterprise warranty support packages.
• Q: Can I use multiple 5400 PRO drives in a RAID array?
  A: Yes. The drives are compatible with typical RAID controllers that support SATA SSDs. For best results, follow the controller’s guidance on alignment, caching policies, and endurance considerations for read-intensive configurations.