Micron 7400 MAX 3.20 TB NVMe SSD – 2.5" U.3 PCIe Gen4 x4 (Mixed Use, TAA Compliant)

The Micron 7400 MAX 3.20 TB solid state drive delivers enterprise-grade performance for demanding data centers, virtualization environments, and cloud infrastructures. Engineered for mixed-use workloads, this 2.5-inch internal drive uses a PCIe Gen4 x4 interface and NVMe protocol to unlock low latency, high throughput, and consistent IOPS across diverse applications. With a compact U.3 form factor and TAA compliance, the Micron 7400 MAX is designed to fit into a wide range of servers and backplanes, enabling seamless scale-out, storage pooling, and acceleration of modern workloads without compromising security or manageability. Built to handle databases, virtual machines, containerized services, and analytics under sustained load, this drive aligns with data-center objectives to maximize performance per watt, optimize storage efficiency, and reduce total cost of ownership.

• PCIe Gen4 x4 performance with NVMe protocol delivers superior throughput and low-latency I/O, helping databases, big data analytics, virtualization, and container platforms meet service level agreements with margin.
• 2.5-inch internal form factor with U.3 backplane compatibility supports straightforward integration in existing enterprise servers and storage arrays, minimizing downtime and simplifying deployment in dense racks.
• Mixed-use endurance designed for continuous operation in data centers, providing reliable, predictable performance under diverse workloads while reducing the need for frequent tiering or hardware refreshes.
• TA A compliant manufacturing and packaging ensures compatibility with procurement requirements in government and enterprise environments, enabling broad adoption across public-sector and regulated settings.
• Enterprise-grade data protection features, including secure erase options and robust data-at-rest security, help safeguard sensitive information in virtualized, cloud-native, and multi-tenant environments while maintaining ease of management.

Technical Details of Micron 7400 MAX 3.20 TB Solid State Drive

• Capacity: 3.20 TB
• Form factor: 2.5" internal
• Interface: PCIe Gen4 x4 (NVMe)
• Connector: U.3 (SFF-8639) for enterprise backplane and backplane-based NVMe deployments
• Warranty: Enterprise-grade reliability aligned with data-center expectations (specific terms vary by region and distributor)
• Compliance: TAA compliant for use in government and regulated environments
• Security: Support for standard data-protection features and secure erase options to maintain data hygiene

How to Install Micron 7400 MAX 3.20 TB

Installing a 2.5-inch Micron NVMe drive in a server or storage chassis with a U.3 backplane is a routine procedure when you follow best-practice steps. The process below is designed to be clear and practical for data-center technicians and IT professionals responsible for deploying NVMe storage in enterprise environments.

• Power down the system, unplug from power, and ground yourself to prevent static discharge. Confirm that you have the correct drive in hand and that you are accessing the appropriate drive bay or backplane slot designed for 2.5" U.3 NVMe drives.
• Open the chassis or server access panel according to your vendor’s guidelines. Locate the U.3/NVMe drive bay or the backplane slot where the Micron 7400 MAX will reside. Ensure the drive sled or carrier is ready and aligned for insertion.
• Carefully insert the Micron 7400 MAX into the backplane or drive sled, ensuring the connector interface is fully seated. When using a drive cage, secure the drive with screws or a locking mechanism as specified by the chassis design.
• Connect the U.3 interface cable or backplane interconnect as required by your server or storage array. Verify that the connection is firm and properly seated to avoid intermittent disconnects during operation.
• Secure the sled in its slot and reassemble the chassis cover. Power on the system and enter the BIOS/UEFI or RAID controller configuration utility to detect the new drive. Confirm that the Micron 7400 MAX is recognized as an available NVMe device.
• Within the operating system or storage management software, initialize and format the drive according to your deployment plan. Create or extend volumes, assign appropriate hot-spare policies if applicable, and integrate the drive into your storage pools or RAID configurations as needed.
• Run a basic health check and firmware validation, applying the latest driver and firmware updates from Micron or the server vendor if available. Document the installation for future reference and monitoring.

Frequently asked questions

• Q: What workloads is the Micron 7400 MAX 3.20 TB best suited for?
  A: It is designed for mixed-use workloads common in data centers, including databases, virtualization, containers, cloud services, and analytics, where high throughput and consistent latency are essential.
• Q: What is the form factor and interface?
  A: The drive uses a 2.5-inch internal form factor with a U.3 backplane interface and connects via PCIe Gen4 x4 with NVMe protocol, enabling fast data transfer and broad compatibility in enterprise systems.
• Q: Is this drive compliant with government procurement?
  A: Yes, the Micron 7400 MAX is TA A compliant, making it suitable for use in many government and regulated environments.
• Q: Does the drive offer data security features?
  A: The drive supports enterprise-grade data protection and secure erase options to help protect data at rest and support secure disposal or repurposing of drives within compliant environments.
• Q: How should I maintenance and update firmware?
  A: Regularly check Micron and server vendor resources for firmware updates, apply recommended firmware revisions to improve reliability, performance, and compatibility with NVMe and U.3 backplanes, and monitor SMART attributes as part of standard data-center practices.