Micron 7450 PRO 15.36 TB NVMe PCIe 4.0 U.3 Internal SSD

The Micron 7450 PRO 15.36 TB solid state drive is a game-changing storage solution engineered for high-performance data center workloads. Built to excel in read-intensive environments, this 2.5" internal SSD leverages advanced 176-layer NAND technology to deliver the reliability, density, and efficiency that enterprises demand. As data volumes surge and latency requirements tighten, the 7450 PRO helps organizations accelerate critical applications, speed analytics, and improve overall data access times without sacrificing data integrity. With a U.3 interface and PCIe 4.0 x4 compatibility, it slots into standard enterprise backplanes and server bays, enabling seamless integration into existing storage ecosystems while maintaining enterprise-grade compliance and serviceability.

• Massive capacity for dense data footprints: At 15.36 TB, this drive provides ample room for hot data, large databases, grande-scale analytics, and backup or snapshot storage, reducing the need for frequent tiering and enabling faster access to key datasets.
• Optimized for read-intensive workloads: The Micron 7450 PRO is purpose-built to accelerate read-heavy operations such as database lookups, content delivery, virtual desktop infrastructure caching, and real-time analytics, delivering lower latency and higher IOPS per watt compared with traditional storage media.
• U.3 form factor with PCIe 4.0 x4 NVMe interface: A familiar enterprise 2.5" form factor paired with a high-bandwidth NVMe interface allows straightforward deployment into backplanes, storage arrays, and PCIe-enabled servers, offering excellent compatibility with modern data-center architectures.
• 176-layer NAND technology for reliability and efficiency: The innovative NAND design enhances endurance, data integrity, and power efficiency, helping to sustain steady performance over long service lives in read-focused workloads while maintaining data fidelity under heavy use.
• TAA compliant for regulated environments: The Micron 7450 PRO meets Trade Agreements Act (TAA) requirements, making it suitable for government, financial, and other regulated sectors that demand compliant components in sensitive data-center deployments.

Technical Details of Micron 7450 PRO 15.36 TB

• Capacity: 15.36 TB
• Form factor: 2.5" internal
• Interface: U.3 (PCI Express NVMe 4.0 x4)
• Workload profile: Read Intensive
• NAND technology: 176-layer
• Compliance: TAA Compliant
• Designed for enterprise data-center use, optimized for low-latency read operations and consistent performance under heavy read workloads

How to install Micron 7450 PRO 15.36 TB

• Prepare the system and backing infrastructure: Power down the server or storage appliance and unplug it from power. Ensure you have a compatible 2.5" drive bay or drive tray and a backplane that supports U.3 NVMe PCIe 4.0 x4 connections. Confirm that firmware on the host controller and backplane is up to date to maximize drive compatibility and throughput.
• Remove the existing drive or free slot: If upgrading, carefully remove the existing drive from its tray or sled, noting the position and screws used to secure it. If adding, identify an available 2.5" slot that supports NVMe drives and has a corresponding backplane channel for PCIe connectivity.
• Install the Micron 7450 PRO drive into the tray: Align the drive with the tray’s guides and slide it into the backplane or PCIe backplane slot until fully seated. Secure the drive with the appropriate screws or latch mechanism provided with the drive tray, ensuring there is proper contact with the connector.
• Connect and verify: Reconnect power and data cables back to the server or storage array. Power on and enter the system BIOS/UEFI or RAID/controller configuration utility to confirm the drive is detected by the backplane and controller. Update the NVMe drive firmware if a newer version is available.
• Initialize and configure in the OS/array: In the operating system or storage management software, initialize the drive as a new NVMe device. Create the desired file system or provisioning scheme (e.g., NTFS, ext4, XFS, or virtualized storage pools) and assign the appropriate tiering or caching policies if used in your environment. Run a basic health check and set SMART monitoring to track wear, temperature, and performance.
• Validate performance and reliability: After installation, perform read tests and latency checks to confirm expected throughput. Monitor workloads for stable performance and verify that the drive integrates seamlessly with your analytics, databases, or virtualization workloads.

Frequently asked questions

• Q: What workloads is the Micron 7450 PRO 15.36 TB best suited for? A: It is optimized for read-intensive workloads common in data-center scenarios, such as database lookups, caching for virtualized environments, analytics on hot data, and rapid retrieval of frequently accessed information.
• Q: Which system configurations support this drive? A: The drive uses a 2.5" form factor with U.3 PCIe NVMe 4.0 x4, designed to fit standard enterprise backplanes and servers that support NVMe drives. Ensure your host controller, backplane, and firmware are compatible with PCIe NVMe U.3 devices.
• Q: Is the Micron 7450 PRO compliant with government or regulated environments? A: Yes, this model is TAA compliant, making it suitable for procurement in regulated sectors and government-related deployments where compliance matters.
• Q: How does the 176-layer NAND technology impact performance and reliability? A: The 176-layer NAND improves data density, error correction capabilities, and power efficiency, contributing to more consistent read performance and durable operation in enterprise workloads over time.
• Q: Do I need special software or drivers to use this drive? A: For most modern data-center deployments, standard NVMe drivers and OS storage management tools are sufficient. In high-performance environments, ensure your storage controller firmware and host drivers are current to maximize throughput and reliability.