Middle Atlantic BGR Series 276 CFM Fan Top with Controller

Middle AtlanticSKU: 5537696

Price:
Sale price$736.20

Description

Middle Atlantic BGR Series 276 CFM Fan Top with Controller

The BGR-276FT-FC fan top from Middle Atlantic is engineered to deliver high-performance cooling directly at the top of your rack — the point where hot air first rises. With four pre-mounted high-performance fans, this unit pushes up to 276 CFM of airflow while maintaining a remarkably low noise footprint of 35 dBA. Designed for standard 19-inch racks, it provides robust thermal management for dense server deployments, network gear, and storage devices, helping prevent heat-related throttling and extending equipment life. The integrated controller simplifies management, allowing you to fine-tune cooling to match workload demands, reduce energy consumption, and keep critical devices within optimal operating temperatures. Built for reliability in demanding data-center and AV environments, this top-mounted solution combines airflow efficiency, quiet operation, and straightforward installation into a single, dependable package.

  • Extreme cooling with quiet operation: Up to 276 CFM of airflow at a quiet 35 dBA, delivering powerful cooling without intruding on nearby work or recordings.
  • Integrated controller for precise temperature management: An on-board controller enables seamless speed adjustments, monitoring, and adaptive cooling to balance performance and energy use.
  • Four pre-mounted high-performance fans: Four fans are mounted at the factory to ensure even air distribution and rapid response to rising rack temperatures.
  • Rugged top-mounted design for standard racks: Engineered to fit 19-inch racks, offering a secure, space-efficient cooling top that complements existing rack hardware.
  • Easy installation and maintenance: Simple, tool-friendly top-mount installation with accessible wiring and a durable build designed for long-term reliability in busy data environments.

Technical Details of Middle Atlantic BGR Series 276 CFM Fan Top with Controller

  • Airflow: Up to 276 CFM
  • Noise Level: 35 dBA
  • Configuration: Top-mounted fan top with integrated controller
  • Fans: Four pre-mounted high-performance fans
  • Mounting: 19-inch rack-compatible top unit
  • Controller: Integrated controller for fan speed control and operation monitoring

how to install Middle Atlantic BGR Series 276 CFM Fan Top with Controller

Installing the BGR-276FT-FC is a straightforward procedure designed to minimize downtime and ensure reliable operation. Begin by preparing the rack area: power down all equipment running in the vicinity, and verify that the rack top surface is clean, level, and free of obstructions that could impede airflow. Confirm that the rack is rated for a top-mount cooling solution and that electrical connections available meet the controller’s requirements. Gather the mounting hardware provided by Middle Atlantic, typically including screws and slide-in fittings compatible with standard 19-inch racks. Plan cable routing ahead of time to keep the airflow path clear and to simplify future maintenance.

Step-by-step installation typically proceeds as follows:

1) Position the fan top above the rack, aligning mounting holes with the rack’s top surface or vertical mounting rails as appropriate. Ensure the four pre-mounted fans have an unobstructed intake and exhaust path. 2) Secure the unit with the screws supplied by the manufacturer, fastening evenly to avoid warping and to maintain proper airflow alignment. 3) Route the controller’s power and data connections, keeping cables away from moving components and hot air exhaust. If the controller requires a dedicated power source, connect it according to the product’s wiring diagram and local electrical codes. 4) Power up the rack system and the fan top. Access the integrated controller interface to set initial fan speeds or auto mode. 5) Verify operation: listen for smooth, consistent fan activity, observe the gauge or indicators on the controller, and confirm that there are no unusual vibrations or noises. 6) Check airflow at the top exhaust to ensure hot air is exiting efficiently and that there are no hot spots forming within the rack. 7) If your IT environment has temperature sensors, calibrate the controller thresholds to match your data center or lab protocol for proactive cooling. 8) Perform a final inspection of cable management and ventilation pathways, then re-secure any covers or panels as required.

Best practices for installation include planning for future expansion, measuring clearance on all sides to prevent chafing or interference with door swings, and scheduling a post-installation test run during peak load to confirm sustained performance. Because thermal management is mission-critical, consider coordinating this upgrade with your facility’s power and environmental monitoring systems. By integrating the BGR Series top with your existing temperature sensors and management software, you can achieve a cohesive cooling strategy that scales with your equipment and workload.

Frequently asked questions

  • Q: What is the maximum airflow of the BGR-276FT-FC? A: The unit delivers up to 276 CFM of cooling airflow to rapidly mitigate heat in dense rack configurations.
  • Q: How loud is this fan top? A: It operates at a noise level of approximately 35 dBA, enabling quiet operation in most data-center and office environments.
  • Q: Does the fan top include a controller? A: Yes. The BGR-276FT-FC features an integrated controller for adjusting fan speeds and monitoring cooling performance.
  • Q: Is this top compatible with standard 19-inch racks? A: Absolutely. The unit is designed as a top-mount solution for standard 19-inch racks to fit seamlessly with common rack configurations.
  • Q: What installation considerations should I keep in mind? A: Ensure proper clearance for airflow, secure mounting, correct wiring per the provided instructions, and plan for cable management so that intake and exhaust paths remain unobstructed.
  • Q: Can the controller interface be integrated with other environmental monitoring systems? A: The integrated controller provides local control and monitoring; for integration with external systems, consult your facility’s IT and facilities teams and verify compatibility with any remote monitoring interfaces described in the product manual.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed