Palo Alto Compatible PAN-SFP-PLUS-SR Transceiver — 10GBASE-SR, 850nm, MMF, LC, TAA Compliant

This Palo Alto PAN-SFP-PLUS-SR compatible transceiver delivers dependable 10 Gigabit Ethernet performance with seamless plug-and-play integration for PAN‑OS environments. Engineered to be functionally identical to the OEM PAN-SFP-PLUS-SR module, it uses an 850 nm laser to drive a short-range multimode fiber link up to 300 meters, making it an ideal choice for data centers, enterprise campuses, and high-density racks. Built for reliability and compatibility, this SFP+ transceiver is an excellent, cost-conscious alternative that preserves network performance while simplifying procurement under TAA guidelines. Whether upgrading an aging chassis, refreshing links between switches, or expanding a data center spine, this transceiver is designed to deliver consistent, high-quality service without disruption.

• Ultra‑reliable 10GBASE-SR performance: This transceiver provides a full-duplex 10 Gbps link optimized for short-range multimode fiber, using a stable 850 nm VCSEL source to ensure robust transmission in typical data center and campus deployments.
• Vendor-neutral compatibility with Palo Alto devices: Specifically engineered to be PAN-SFP-PLUS-SR compatible, enabling seamless interoperation with Palo Alto firewalls and other PAN‑OS devices as well as widely deployed SFP+ ports across a range of end devices. It delivers true plug‑and‑play behavior while preserving performance parity with the original module.
• TAA compliant and procurement-ready: This module meets Trade Agreement Act requirements, offering a compliant, cost-effective alternative that aligns with enterprise procurement policies and regulatory expectations without sacrificing compatibility or performance.
• Compact SFP+ form factor with LC connector: The compact SFP+ package fits standard SFP+ slots, offering a duplex LC connector for reliable fiber termination. Its small footprint supports dense data center racks and modular chassis designs while maintaining easy serviceability and hot-swapping readiness.
• Designed for speed, efficiency, and long-term value: Optimized for high-bandwidth workloads—virtualization, storage networks, and clustered compute—this transceiver reduces total cost of ownership by combining reliability, broad compatibility, and straightforward installation in a single, economical package.

Technical Details of Palo Alto Compatible PAN-SFP-PLUS-SR

• Form factor: SFP+ (Small Form-factor Pluggable Plus), hot-swappable for easy maintenance and upgrades.
• Data rate: 10 Gbps (10GBASE-SR) for high-speed, scalable connectivity in data centers and enterprise networks.
• Wavelength: 850 nm VCSEL transmission, optimized for multimode fiber applications.
• Fiber type and distance: Multimode fiber (MMF) link capable of up to 300 meters on appropriate OM3/OM4 fiber; ideal for intra-building and campus runs.
• Connector type: LC duplex connector for reliable, high-density fiber termination and compatibility with standard fiber cabling.
• Compatibility and compliance: Functionally identical to OEM PAN-SFP-PLUS-SR modules and fully compatible with Palo Alto networks; TAA compliant to meet procurement standards.

How to install Palo Alto Compatible PAN-SFP-PLUS-SR

• Power down the device or ensure the maintenance window allows a hot-swap if your network policy permits hot-swapping SFP+ modules; this preserves downtime and protects connected endpoints.
• Gently insert the PAN-SFP-PLUS-SR module into an available SFP+ port until it seats with a firm click; confirm the module is fully engaged and aligned with the receptacle.
• Connect the fiber optic patch cord to the LC duplex connector, ensuring the transmit and receive pairs are correctly oriented and terminated with compatible MMF cabling (OM3/OM4 recommended for 300 m range).
• Power on the device (if powered down) and monitor the link status lights on both the transceiver and the connected device; verify that the link is up and the negotiated speed is 10 Gbps.
• Access the network device’s management interface to confirm recognition of the SFP+ transceiver, update any firmware if required, and perform basic throughput tests to validate performance and stability.

Frequently asked questions

• Q: Is this transceiver compatible with Palo Alto devices?
  Yes. It is designed to be PAN-SFP-PLUS-SR compatible and intended for use with Palo Alto networks gear as a drop-in replacement, offering the same performance and plug‑and‑play experience as the original module.
• Q: What fiber type and distance can I expect?
  A: It uses multimode fiber (MMF) with an 850 nm wavelength and supports up to 300 meters on appropriate OM3/OM4 fiber, which is typical for 10GBASE-SR deployments in data centers and campus networks.
• Q: Is this module TAA compliant?
  A: Yes. The transceiver is TAA compliant, making it suitable for procurement in agencies and enterprises that require compliance with the Trade Agreements Act.
• Q: How does the performance compare to the OEM PAN-SFP-PLUS-SR?
  A: The module is functionally identical in terms of data rate, wavelength, and connector, designed to deliver equivalent performance and interoperability while offering cost advantages and broad compatibility with PAN OS devices and standard SFP+ ports.
• Q: Can I use this as a plug-and-play replacement without configuring the device?
  A: In most cases yes; the transceiver should be recognized by the device without special configuration. If your device requires a firmware update or a specific compatibility setting, follow the vendor’s guidelines to ensure optimal operation.