Description
Panduit FlexFusion XGL Series Cabinet 800 x 48RU x 1200
The Panduit FlexFusion XGL Series Cabinet in white is a premium, scalable solution engineered for reliable data center and network room organization. Measuring 800 mm in width, 48U in height, and 1200 mm in depth, this cabinet is purpose-built to house a wide range of IT gear—from servers and switches to patch panels and power distribution units. It comes equipped with a single hinged perforated front door and a split perforated rear door, along with left and right side panels to secure equipment and optimize airflow. With cage nut equipment rails, a 1-set PDU mounting bracket, and robust casters for easy positioning, this cabinet blends practical accessibility with durable, purpose-driven design. Whether you’re building a new data center or upgrading an existing rack room, the FlexFusion XGL cabinet provides a flexible, future-ready foundation that grows with your network’s needs.
- Room-ready dimensions and airflow. The 800 mm width, 48U height, and 1200 mm depth create a spacious, well-ventilated enclosure that comfortably fits a wide range of 19-inch equipment while maintaining clear cable paths and efficient airflow to reduce heat buildup.
- Security and accessibility optimized. A single hinged perforated front door paired with split perforated rear doors allows effortless access for maintenance and upgrades while maintaining security and controlled ventilation. Perforated panels promote airflow, helping equipment stay cool under load.
- Versatile mounting and cable management. Cage nut equipment rails provide flexible mounting for diverse devices, while the included PDU mounting bracket simplifies power distribution integration. The design supports clean cable routing and organized patching, easing maintenance tasks and future upgrades.
- Complete assembly with side protection. Left and right side panels enclose the cabinet to protect sensitive equipment from dust and incidental contact, while preserving easy access for technicians. This configuration is ideal for rack-mable devices, patch panels, and vertically organized cabling runs.
- Mobility and adaptability. Casters enable effortless repositioning within a data center or office environment, making initial installation, maintenance, and reconfiguration straightforward. The cabinet’s modular nature helps teams scale capacity as demands evolve.
Technical Details of Panduit FlexFusion XGL Series Cabinet 800 x 48RU x 1200
- Dimensions: 800 mm width x 48U height x 1200 mm depth
- Finish: White powder-coated steel exterior for durability and clean aesthetics
- Doors: Front door—Single Hinged Perforated; Rear doors—Split Perforated for flexible airflow and maintenance access
- Sides: Left and Right Side Panels for enclosure security and dust protection
- Rails: Cage Nut Equipment Rails to accommodate standard 19-inch equipment
- PDU mounting: Includes 1 Set PDU Mounting Bracket for efficient power distribution
- Mobility: Casters for easy positioning and reconfiguration
- Material and build: Heavy-duty steel construction designed to withstand demanding data center environments
- Compatibility: Supports typical 19-inch rack-mount equipment with room for cabling and airflow management
The FlexFusion XGL Series Cabinet emphasizes practical design and reliable performance. Its perforated doors optimize cooling, while the cage nut rails and PDU mounting bracket streamline device installation and power management. The color and finish align with modern data center aesthetics, and the white exterior helps with visibility and cleanliness in busy rack rooms. The modular, secure enclosure is suitable for a variety of equipment footprints and configurations, ensuring you can adapt the cabinet to evolving technology without replacing the cabinet itself. In short, this cabinet delivers a balanced combination of capacity, accessibility, and resilience that IT teams value in high-density environments.
how to install Panduit FlexFusion XGL Series Cabinet 800 x 48RU x 1200
- Plan the layout. Confirm the location and ensure floor loading capacity supports the cabinet plus all installed equipment. Verify electrical supply and cooling capacity to sustain current and future loads.
- Prepare the cabinet frame. Unpack the cabinet, inspect all components, and assemble the base if required. Verify caster installation if you intend to move the cabinet during or after setup.
- Position and level the cabinet. Place the cabinet in the designated area and use a level to ensure it sits evenly. Proper leveling prevents misalignment of doors and rails and supports safe operation over time.
- Install doors and panels. Attach the single hinged perforated front door and the split perforated rear doors. Fix the left and right side panels to enclose the sides of the cabinet while leaving access points for maintenance.
- Mount rails and devices. Install cage nut equipment rails according to your equipment layout, then mount servers, switches, and patch panels using standard 19-inch rack-mount spacing. Leave adequate clearance for cable management and airflow.
- Attach PDU bracket and cables. Secure the PDU mounting bracket in the designated location. Route power and data cables methodically to minimize tangling and to optimize airflow within the enclosure.
- Configure cable management. Integrate any cable organizers, guide channels, and tie-down points to keep pathways clear and support future expansion or re-cabling.
- Test and finalize. Power up the equipment, verify connectivity, and perform a sweep to check for hot spots, airflow restrictions, or clearance issues. Label cables for future maintenance and create an equipment map for quick reference.
Note: Always follow best practices for safety and electrical code compliance when installing IT equipment in a rack enclosure. If vibration, seismic, or weight distribution concerns exist, consult your facilities team or Panduit technical resources for guidance on mounting and stabilization options compatible with the XGL cabinet.
Frequently asked questions
- Q: What equipment can fit in the Panduit FlexFusion XGL cabinet? A: The cabinet is designed to accommodate standard 19-inch rack-mount equipment, including servers, switches, patch panels, and related networking gear, with space for proper cable management and airflow.
- Q: Does the cabinet come pre-assembled? A: The cabinet is typically shipped with components that may require minimal assembly or attachment, such as doors, panels, rails, and brackets. Refer to the included setup guide for exact assembly steps.
- Q: Can I reposition the cabinet after installation? A: Yes. The unit includes casters that enable easy movement within the data center or office, making reconfiguration straightforward during maintenance or expansion.
- Q: How does airflow management work in this cabinet? A: The front door and rear doors are perforated to promote cross-ventilation, helping to dissipate heat generated by equipment. Side panels also help maintain enclosure integrity while allowing airflow where needed.
- Q: Is there any option to customize or expand the cabinet later? A: The FlexFusion XGL series is designed to be modular, with cage nuts, rails, and brackets that support flexible expansion. You can add more devices, additional PDU options, or adjust cable management as requirements evolve.
Customer reviews
Showing - Of Reviews