SIIG 4K HDMI HDBaseT Extender Over Single Cat5e/6 with RS-232, IR & PoC - 100m

Experience the ultimate in audio and video transmission with the SIIG 4K HDMI HDBaseT Extender Over Single Cat5e/6 with RS-232, IR & PoC - 100m. This state-of-the-art device allows you to extend HDMI 1.4 audio and video signals seamlessly over a single CAT5e or CAT6 cable, making it perfect for home theaters, conference rooms, and digital signage applications. With the capability to transmit signals up to 100 meters (330 feet) without compromising on quality, it is an essential solution for any high-definition multimedia setup.

• Extended Transmission Distance: Effortlessly extend HDMI 1.4 audio and video signals up to 100 meters (330 ft) at Full HD 1080p and 70 meters (230 ft) at UHD 4K (3840x2160) over a single premium quality CAT5e/6 cable.
• Exceptional Video Quality: Delivers crystal clear picture quality with resolutions up to 3840x2160 @ 30Hz and supports YUV 4:4:4 8-bit and YUV 4:2:0 10-bit, ensuring stunning visuals for every viewing experience.
• High-Fidelity Audio Support: Enjoy pure, uncompressed 7.1 channel digital HDMI audio over CAT cable, with support for high bitrate audio formats including DTS-HD Master Audio and Dolby TrueHD.
• Power Over Cable (PoC): Simplify your installation with Power over Cable technology, allowing both the transmitter and receiver units to be powered by a single power adapter connected to either unit, enhancing convenience and reducing clutter.
• Bi-directional IR Control: Easily control your HDMI source device or remote display from either end, thanks to the built-in bi-directional IR sensors, facilitating a seamless user experience without needing extra remote controls.

Technical Details

• Product Type: HDMI Extender
• Signal Type: HDMI 1.4
• Maximum Resolution: 3840x2160 @ 30Hz
• Transmission Distance: Up to 100m (330ft) for 1080p; 70m (230ft) for 4K
• Audio Support: 7.1 channel digital audio, DTS-HD Master Audio, Dolby TrueHD
• Power Over Cable: Yes
• IR Control: Bi-directional
• Housing Material: Metal with cooling slots
• Installation Type: Wall mountable

How to Install

Installing the SIIG 4K HDMI HDBaseT Extender is quick and easy. Follow the steps below:

1. Connect your HDMI source (such as a Blu-Ray player or gaming console) to the HDMI input of the transmitter unit.
2. Run a suitable CAT5e or CAT6 cable from the transmitter unit to the remote location where your HDMI display is located.
3. Connect the other end of the CAT5e or CAT6 cable to the receiver unit’s HDMI output.
4. Connect your HDMI display to the HDMI output of the receiver unit.
5. Use a single power adapter to connect either the transmitter or receiver unit to a power source, enabling Power over Cable (PoC).
6. If needed, connect IR emitters to the IR ports to enable bi-directional control.
7. Power on all devices, and you’re ready to enjoy high-definition multimedia content!

Frequently Asked Questions

• What types of cables are supported?
  The SIIG HDMI HDBaseT Extender is designed to work with premium quality CAT5e and CAT6 cables. It is recommended to use 100% copper cables for optimal performance.
• Can I use this extender to connect multiple displays?
  This device is designed for point-to-point connections. To connect multiple displays, you would need to use additional extenders or HDMI splitters.
• Is there any latency in the signal transmission?
  The SIIG HDMI HDBaseT Extender is designed to deliver real-time audio and video transmission with minimal latency, ensuring a seamless viewing experience.
• Does it support 3D content?
  Yes, the extender supports 3D video formats in addition to standard and high-definition content.
• Is installation difficult?
  Not at all! The installation process is straightforward and can be completed in just a few minutes with basic tools.