SIIG HDMI KVM Extender Over CAT Cable

About SIIG HDMI KVM Extender Over CAT Cable

• KVM Extender Over CAT Cable: Extend USB keyboard, mouse, and HDMI signals up to 230FT (70 meters) over CAT 6/6e/7 cables. Requires a dedicated Ethernet cable, not on the network. Recommended to use high-quality copper CAT cables for optimal performance.
• Uncompressed HDMI Signals: Supports HDMI data transmission up to 1080p@60Hz refresh rate with near-zero latency. Features PCM audio, 5.1 channel sound, and audio extraction to stereo (L/R) via a 3.5mm audio jack on the Receiver (RX) to an external speaker.
• Control from Remote Location: Equipped with two USB 2.0 Type-A ports on the KVM Receiver (RX) for remote control of a computer using a USB keyboard and mouse. Wireless keyboard and mouse are also supported by plugging the dongle into the USB port.
• Easy to Use: No driver required for setup. Simply plug and play to enable control of computers, DVRs, NVRs, and other devices up to 230FT away. Suitable for various applications including offices, schools, public kiosks, hospitals, and call centers, helping secure computer consoles from public access.
• See What You Deliver: Additional HDMI output on the Transmitter (TX) allows connection to a local display or monitor with an HDMI cable. HDMI loop-out function enables monitoring of the delivered HDMI signal.

Technical Details:

- Extends USB keyboard, mouse, and HDMI signals up to 230FT over CAT 6/6e/7 cables.

- Supports HDMI data transmission up to 1080p@60Hz refresh rate.

- Features PCM audio, 5.1 channel sound, and audio extraction to stereo (L/R).

- Equipped with two USB 2.0 Type-A ports on the KVM Receiver (RX).

- Additional HDMI output on the Transmitter (TX) for local display connection.

How to Install:

- Connect the Transmitter (TX) to the video source and the Receiver (RX) to the display.

- Use high-quality copper CAT 6/6e/7 cables for optimal performance.

- Plug the USB keyboard and mouse into the USB ports on the Receiver (RX).

- Connect the external speaker to the 3.5mm audio jack on the Receiver (RX) for audio output.

- For remote control, plug the dongle for wireless keyboard and mouse support into the USB port.

Frequently Asked Questions:

Q: Does this KVM extender support wireless keyboard and mouse?

A: Yes, the KVM extender supports wireless keyboard and mouse with the use of a dongle plugged into the USB port on the Receiver (RX).

Q: Can I monitor the HDMI signal being delivered with this extender?

A: Yes, the extender features an additional HDMI output on the Transmitter (TX) for connecting to a local display or monitor, allowing you to monitor the HDMI signal being delivered.

Q: Is any driver installation required for setting up this KVM extender?

A: No, there is no driver required for setting up this KVM extender. It is a plug-and-play device for easy installation and use.