SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe

The SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe is a powerful solution designed to enhance your computing experience by integrating advanced storage capabilities into your system. This innovative product adds three internal SATA 6Gb/s channels along with one SATA SSD socket, allowing for versatile storage options and improved performance. With its cutting-edge HyperDuo technology, this hybrid PCIe card optimizes your system by enabling SSD speeds at a fraction of the cost, seamlessly working with top-tier 6Gb/s HDDs. Experience unparalleled system performance, cost-effectiveness, and usability with this essential storage upgrade.

• Enhanced Performance: Experience significant improvements in system boot-up times and overall efficiency thanks to the SSD acceleration capabilities of the SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe.
• Cost-Effective Storage: With the integration of SSD performance at 1/3 of the cost, you can enjoy the benefits of high-speed storage while still saving on hardware expenses.
• Flexible RAID Options: This hardware RAID controller supports RAID 0, 1, and 10 configurations, offering you the flexibility to choose the best setup for your storage needs.
• Easy Installation: The plug-in card form factor ensures a straightforward installation process, making it easy for users to enhance their systems with minimal technical effort required.
• Reliable Data Transfer: Featuring a PCI Express x2 host interface, this product guarantees dependable data transfer rates for maximum efficiency during data operations.

Technical Details

• Controller Type: Serial ATA/600
• RAID Levels Supported: 0, 1, 10
• Host Interface: PCI Express x2
• Maximum Data Transfer Rate: 6Gb/s
• Form Factor: Plug-in Card
• Number of SATA Channels: 3 Internal
• SATA SSD Socket: 1

How to Install

1. Power down your computer and unplug all cables for safety.
2. Open the computer case to access the PCIe slots on the motherboard.
3. Locate an available PCIe x2 slot and gently insert the SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe card into the slot until it clicks into place.
4. Secure the card with a screw if necessary, and reconnect any cables that were disconnected.
5. Power up your computer, and install any necessary drivers if prompted by your operating system.
6. Configure RAID settings through your BIOS or RAID management software as needed to optimize your setup.

Frequently Asked Questions

1. What are the benefits of using HyperDuo technology?

HyperDuo technology allows you to combine the high speed of SSDs with the large storage capacity of HDDs, providing enhanced performance without the higher costs typically associated with SSD storage.

2. Is this product compatible with all motherboards?

The SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe card is designed to work with any motherboard that has an available PCIe x2 slot. Always ensure your system meets the necessary specifications before installation.

3. Can I use this controller with existing HDDs?

Yes, the SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe is fully compatible with leading 6Gb/s HDDs, allowing you to enhance your storage solution without needing to replace your current drives.

4. What RAID configurations can I set up with this card?

This controller supports RAID 0, 1, and 10, providing you with various options to optimize performance and redundancy based on your storage requirements.

5. Do I need any special drivers for installation?

Most operating systems will recognize the SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe automatically, but you may need to install specific drivers for advanced RAID functionality. Check the manufacturer's website for the latest driver updates.