SMC Networks EZ Switch 8-Port PoE 10/100 Fast Ethernet

Experience reliable, plug‑and‑play networking with the SMCFS801P 8‑port 10/100 Mbps PoE switch. Built for small offices, shared workspaces, and desktop setups, this compact unmanaged switch blends fast Ethernet connectivity with Power over Ethernet to simplify deployments of PD devices such as IP cameras, VoIP phones, and wireless access points. With automatic PoE detection and IEEE 802.3af/at compatibility, you can deploy energyefficient, cable‑convenient networks without complicated configurations or extra power adapters on every device. The SMCFS801P is designed to sit neatly on a desk, shelf, or wall‑mounted setup, delivering dependable performance while keeping a low footprint and quiet operation in busy work environments. Whether you’re upgrading a home office, extending a storefront network, or adding IP surveillance around a small business, this eight‑port switch makes it easy to power and connect everything you need with minimal effort and maximum reliability.

• 8-Port Fast Ethernet with PoE on every port: Create a compact, energy‑efficient network topology by delivering both data and power over Ethernet to compatible devices, reducing cable clutter and eliminating the need for separate power adapters for each PoE device.
• IEEE 802.3af/at PoE support with automatic PD detection: The switch automatically detects whether a connected device requires PoE, delivering safe, standards‑compliant power only where needed and protecting devices from overload.
• Auto‑negotiation and plug‑and‑play deployment: Each port negotiates the best possible speed and duplex setting, ensuring compatibility with a wide range of legacy and modern devices without complicated setup or management software.
• Compact desktop design for clutter‑free spaces: A small footprint and quiet operation make it ideal for under‑monitor setups, workstations, or small conference areas where space is at a premium.
• Unmanaged, reliable performance you can trust: With no management interface required, you get a straightforward, stable network layer that Just Works—perfect for offices, retail counters, classrooms, and remote workstations that demand simplicity and dependability.

Technical Details of SMCFS801P

• Model: SMCFS801P
• Ports: 8 x 10/100 Mbps RJ-45 with PoE capability on each port
• PoE Standards: IEEE 802.3af/at (Power over Ethernet) compatibility for PD devices
• Fair Use of Power: Automatically detects PD requirements and delivers power accordingly, enabling safe operation of IP cameras, VoIP phones, and wireless access points
• Form Factor: Desktop (compact, desk‑friendly footprint designed for easy placement and accessibility)
• Management: Unmanaged switch with plug‑and‑play operation for immediate network connectivity
• Network Speed: 10/100 Mbps per port, suitable for typical office devices and PDs requiring reliable, steady performance
• LED Indicators: Front‑panel LEDs provide quick status on power, link, activity, and PoE per port

How to Install SMCFS801P

Follow these simple steps to set up your SMCFS801P in minutes and start powering compatible devices directly from your switch.

• Choose a convenient location: Place the switch on a desk, shelf, or mount under a desk where it is easily accessible and well ventilated. Keep it close to your router or gateway for a clean uplink cable run.
• Connect to your network: Use a standard Ethernet cable to connect any available port on the SMCFS801P to your router, network switch, or modem/router combo. This uplink provides data connectivity for all downstream PoE ports.
• Power the device: Plug the switch into a working power outlet. Confirm the Power LED is on to ensure the unit is receiving power.
• Attach PoE devices: Connect your PoE‑enabled devices—such as IP cameras, VoIP phones, or wireless APs—to any of the 8 PoE ports. The switch will automatically supply data and power to eligible devices without additional configuration.
• Verify operation: Check the Link/Activity LEDs on the corresponding ports to confirm data transmission and device activity. If a device does not power on, recheck cable connections and ensure the device is PoE compatible.

Frequently Asked Questions

• What is PoE and why do I need an 8‑port PoE switch? PoE delivers both data and power over a single Ethernet cable, eliminating the need for separate power adapters for each PoE device. An 8‑port PoE switch like the SMCFS801P is ideal for powering multiple IP cameras, VoIP phones, or wireless access points from a single, centralized device, reducing cable clutter and simplifying installs in small offices or home workspaces.
• Is this switch suitable for non‑PoE devices? Yes. You can connect non‑PoE devices to any of the non‑PoE capable ports (or simply to any port; the device will operate normally with data only). The PoE feature only affects devices that require power via Ethernet.
• Do I need special software to configure the SMCFS801P? No. This is an unmanaged switch, which means it provides plug‑and‑play operation with no firmware updates or management interface required. For most users, the default configuration is sufficient for reliable performance.
• Can I mix PoE devices with standard Ethernet devices on the same switch? Absolutely. PoE ports will power compatible devices, while non‑PoE devices will function normally without power delivery. Ensure total PoE budget is suitable for your connected PDs, as power is delivered per IEEE standards.
• What environments is the SMCFS801P best suited for? This switch excels in small offices, retail kiosks, classrooms, and home offices where a compact, reliable, and easy‑to‑use PoE solution is desirable. It supports rapid deployment of IP cameras, IP phones, wireless access points, and other PoE devices with minimal setup.