Solidigm D3-S4520 Series SATA SSD

The Solidigm D3-S4520 Series represents a line of standard-endurance SATA solid-state drives engineered to modernize data-center storage, accelerate cloud workloads, and replace aging hard disk drives. With capacities reaching up to 7.68 TB, these drives deliver dependable, enterprise-grade performance that enhances server efficiency and increases IOPS per terabyte. Built to withstand the demands of dense deployments, the D3-S4520 Series prioritizes consistent throughput, low latency, and predictable behavior across mixed read/write workloads, making it a practical upgrade for virtualization hosts, databases, file servers, and large-scale storage arrays. By delivering faster data access than legacy HDDs, these SSDs help reduce bottlenecks, shorten application response times, and improve user experiences across a variety of cloud- and enterprise-scale scenarios. The SATA interface ensures broad compatibility with existing servers and storage controllers, enabling a straightforward migration from spinning disks to solid-state storage without requiring specialized hardware or complicated integration. In environments where energy efficiency, reliability, and total cost of ownership matter, the D3-S4520 Series is designed to deliver sustained performance while consuming less power and generating less heat than traditional HDD-based solutions. Whether deploying a private cloud, scale-out storage, or high-demand transactional workloads, this series is built to provide productive performance, durable data storage, and a smooth upgrade path for data centers that demand reliability and scalability.

• Capacity and endurance for data growth — Up to 7.68 TB of storage with standard-endurance design to support large-scale data growth, archives, and multi-user access patterns while maintaining predictable performance over time in cloud storage and enterprise databases.
• Broad compatibility with a SATA interface — The SATA interface enables seamless integration with a wide range of servers, storage controllers, and backplanes, enabling a straightforward upgrade path from HDDs and minimizing downtime during deployment or expansion in data centers and virtualization environments.
• Improved IOPS per TB and reduced latency — Engineered to boost IOPS per TB and lower latency relative to legacy hard drives, delivering faster boot times, quicker database transactions, and smoother virtualization workloads for virtual desktops, databases, and high-traffic applications.
• Enterprise-grade reliability and firmware optimization — Designed for continuous, heavy-use operation with firmware optimizations, error detection and correction, and wear management to sustain performance and extend drive life in busy data-center environments.
• Energy efficiency and rack-friendly operation — Lower power draw and cooler operation help reduce overall data-center energy consumption and improve cooling efficiency, contributing to lower total cost of ownership in dense racks and cloud deployments.

Technical Details of Solidigm D3-S4520 Series Solid State Drive

• Storage Type: Solid-state drive (SSD) with standard-endurance design
• Interface: Serial ATA (SATA) interface for broad compatibility with servers
• Capacity: Up to 7.68 TB
• Endurance: Standard-endurance
• Intended Use: Cloud storage, server workloads, and data-center applications requiring reliable, scalable storage

How to install Solidigm D3-S4520 Series SSD

Follow these general steps to install the Solidigm D3-S4520 Series SSD in a compatible server or workstation. Always refer to your system’s hardware and software manuals for model-specific guidance.

• Power down the system completely and disconnect from power sources to ensure safe installation.
• Back up any critical data as a precaution before removing or adding storage drives.
• Open the chassis or access panel and locate an available SATA drive slot or caddy compatible with enterprise SATA SSDs.
• Insert the Solidigm D3-S4520 drive into the available slot and secure it with the appropriate mounting hardware as required by your chassis.
• Connect the SATA data cable and the power connector, ensuring a firm, secure connection. Power on the system, enter BIOS/UEFI to verify the drive is detected, and then initialize the disk within the operating system (formatting and partitioning as needed).

Frequently asked questions

• Q: What is the maximum capacity of the Solidigm D3-S4520 Series? A: Up to 7.68 TB.
• Q: What interface does this drive use? A: Serial ATA (SATA) interface, designed for broad compatibility with standard servers and storage controllers.
• Q: How does the D3-S4520 improve performance compared with HDDs? A: It delivers higher IOPS per TB, lower latency, and faster data access, which translates to quicker application response times and improved workload throughput in cloud storage, virtualization, and database environments.
• Q: Is the drive suitable for cloud storage and data-center workloads? A: Yes. The series is built for enterprise use, offering reliable, scalable storage that supports dense deployments and varied workloads.
• Q: What about warranty and support? A: Warranty terms and support options vary by region and retailer. Please consult the vendor’s documentation and your procurement channel for the exact terms that apply to your purchase.