SOLIDIGM D7-P5510 3.84 TB NVMe U.2 SSD — 2.5" Internal PCIe 4.0 x4

Designed for today’s data centers, the SOLIDIGM D7-P5510 3.84 TB NVMe SSD delivers enterprise-grade performance, reliability, and manageability for a wide range of workloads. As a 2.5" internal drive with a U.2 (SFF-8639) interface, this solid state drive enables rapid data access, consistent latency, and scalable throughput essential for database, virtualization, AI/ML pipelines, and high-IOPS applications. Part of the Solidigm D7 family, the D7-P5510 combines high endurance with robust data protection features, making it a dependable choice for read-heavy and write-intensive environments that demand predictable performance and easy integration into existing server ecosystems.

• High-capacity NVMe performance for data centers. The 3.84 TB capacity is engineered to handle large databases, hot databases, analytics workloads, and dense virtualization environments. With NVMe over PCIe 4.0 x4, see improved sequential speeds and reduced latency compared to traditional SATA or SAS drives, enabling faster boot times, quicker VM migrations, and snappier data-driven decision making. This drive is optimized for sustained throughput and responsive performance under demanding workloads, helping data centers achieve higher utilization and better service levels.
• 2.5" internal form factor with U.2 (SFF-8639) interface. This SSD is built for enterprise servers that support the U.2 specification, offering a PCIe NVMe solution in a familiar 2.5" form factor. The U.2 connector provides a robust, hot-swap capable interface commonly used in rack-mounted servers and storage arrays, enabling straightforward integration into existing server trays and hot-swap bays. Compatibility with modern controllers and backplanes makes it an ideal upgrade path for performance-critical workloads without requiring a full system overhaul.
• Enterprise-grade reliability and endurance. The SOLIDIGM D7-P5510 series is designed to meet data-center reliability expectations, delivering durable operation for 24/7 workloads. Built with advanced error detection and correction, data integrity protection, and endurance suitable for sustained enterprise activity, this drive helps maintain consistent performance under heavy load while protecting critical information. Its architecture is optimized to minimize data loss risk during power events and maintain steady performance across multi-drive arrays.
• Optimized for data-center manageability and efficiency. The D7-P5510 is paired with management features that support monitoring, health status, and firmware updates in enterprise environments. These capabilities facilitate proactive maintenance, easier lifecycle management, and smoother integration with server-level monitoring tools. The drive’s efficiency characteristics contribute to lower total cost of ownership by offering better power efficiency per I/O and thermal behavior within dense rack deployments.
• Scalable performance benefits for diverse workloads. Whether supporting high-IOPS databases, virtual desktop infrastructure, analytics pipelines, or AI workflows, the D7-P5510 delivers consistent latency and sustained throughput. The PCIe Gen4 x4 interface aligns with modern data-center hardware, enabling parallelism and throughput needed for multi-tenant clouds and performance-sensitive applications, while optimizing rack density and cooling budgets.

Technical Details of SOLIDIGM D7-P5510 3.84 TB Solid State Drive - 2.5" Internal - U.2 (SFF-8639) NVMe (PCI Express NVMe 4.0 x4)

• Model: D7-P5510
• Capacity: 3.84 TB
• Form Factor: 2.5" internal drive
• Interface: U.2 (SFF-8639)
• NVMe Protocol: NVMe over PCIe
• PCI Express: PCIe 4.0 x4
• Target: Enterprise data-center workloads, high-throughput and high-IOPS environments
• Endurance and Reliability: Designed for sustained, mission-critical operation with enterprise-grade data protection and health monitoring

How to install SOLIDIGM D7-P5510

• Prepare the system: Power down the server, unplug power, and discharge static electricity. Verify the server supports U.2 (SFF-8639) drives and has an available 2.5" drive bay with a U.2 connector or adapter. Confirm firmware compatibility with your enclosure or controller for NVMe PCIe 4.0 x4 operation.
• Remove existing drive (if upgrading): If upgrading, carefully remove the existing drive from the 2.5" bay and disconnect any cables or adaptors. Use proper ESD protection throughout the process.
• Install the Solidigm D7-P5510: Slide the 2.5" U.2 drive into the drive tray or bay, aligning the connector with the server’s U.2 backplane. Secure the drive with screws or the tray’s fastening mechanism. If your system uses hot-swap bays, insert the drive and ensure a secure connection to the backplane.
• Connect and power on: Attach the U.2 data cable to the drive and the server backplane or controller card. Reconnect power and boot the server. Ensure the BIOS/UEFI detects the new NVMe drive and assign any necessary boot or storage priority settings.
• Initialize and configure in OS: In the operating system, initialize the new SSD using disk management tools, format the drive as needed for your environment, and apply any required NVMe driver updates. Consider applying firmware updates if available and performing health checks to monitor SMART attributes.
• Verify performance and enable features: Run a quick benchmark to confirm expected throughput and latency. Enable features such as TRIM, wear-leveling, and any enterprise-specific data-protection options supported by your data-center stack.
• Document and monitor: Record the drive’s serial number, firmware version, and capacity for asset management. Integrate with your server or storage monitoring solution to track health, temperature, and endurance over time.

Frequently asked questions

• What is the capacity of this Solidigm drive? The SOLIDIGM D7-P5510 provides 3.84 TB of NAND-based storage in a 2.5" internal form factor, designed for data-center workloads that require high density and reliable performance.
• What interface and form factor does it use? It uses a 2.5" internal form factor with a U.2 (SFF-8639) interface and NVMe over PCIe 4.0 x4, making it compatible with many enterprise servers and backplanes that support U.2 NVMe drives.
• Is this drive suitable for data-center workloads? Yes. It is engineered for enterprise data-center use, offering high endurance, steady latency, and robust data protection features to support databases, virtualization, analytics, and other demanding workloads.
• How do I install and configure this drive? Install the drive into a supported 2.5" U.2 bay, connect with the U.2 data cable, boot the system, and initialize the drive in the operating system. Update firmware if available and monitor drive health through your server management tools.