StarTech.com 10/100 Ethernet Extender Kit — Long-Range LAN Over Single Pair Wire

Unlock far-flung network access with the StarTech.com 10/100 Ethernet Extender Kit. This two-unit solution is engineered to deliver dependable LAN connectivity over a single pair of copper wires, enabling you to bridge gaps that direct cabling cannot easily cover. With a reach of up to 0.5 miles (800 meters), the kit is tailor-made for remote IP cameras, WiFi access points, and other Ethernet devices where placement is constrained by distance or layout. Whether you’re linking a surveillance camera at the edge of a campus, extending a wireless AP to a distant courtyard, or connecting separate buildings without trenching or complex fiber runs, this extender provides a robust, standards-based link that integrates seamlessly with your existing 10/100 Mbps Ethernet infrastructure.

• Long-range, single-pair Ethernet extension: Extend your LAN across challenging sites by using a dedicated two-unit kit that transmits 10/100 Mbps Ethernet over a single pair of copper wires. The design is purpose-built for remote IP cameras and WiFi APs, allowing you to place devices where they’re most effective while retaining full compatibility with your existing network core. The single-pair approach reduces wiring complexity and cost, offering a practical solution for campus, campus-like campuses, or multi-building environments where long cable runs would be impractical or disruptive.

• 10/100 Mbps Ethernet compatibility: The extender delivers reliable Fast Ethernet performance, supporting 10/100 Mbps data rates. This makes it ideal for standard IP cameras, wired access points, and other non-Gigabit devices that still demand stable, low-latency connections. By preserving familiar Ethernet behavior—MAC addressing, TCP/IP, and common network protocols—the kit integrates smoothly with your existing switches, routers, and network management tools without the need for complex reconfigurations.

• Two-unit, versatile design: The kit comprises a transmitter and a receiver, each engineered for easy deployment in a variety of environments. Place the primary unit near your network core and the remote unit adjacent to the target device (camera or AP), then connect them with a single-pair copper link. The setup is well-suited for equipment closets, utility rooms, or remote mounting locations. Its compact footprint and straightforward layout help minimize installation time and maximize the reliability of the extended link.

• Rugged reliability for real-world installations: Built to withstand the demands of challenging sites, the Ethernet Extender Kit offers a dependable bridge between distant network points. The solution reduces the need for expensive or intrusive infrastructure projects while maintaining the integrity of your network. Its design accommodates the realities of facility deployments, where space constraints, environmental factors, and long cable routes can complicate connectivity. With solid connectors and a straightforward link, you can count on steady performance for security systems and remote network nodes.

• Seamless integration with standard networks: Because the extender uses conventional RJ-45 interfaces and adheres to standard Ethernet practices, it fits neatly into your existing topology. Whether you’re connecting to a managed switch, an unmanaged hub, a router, or other 10/100 Ethernet devices, the kit acts as a transparent bridge, enabling devices like IP cameras and wired APs to operate as if they were directly on the same LAN. This compatibility makes it a versatile option for surveillance deployments, office expansions, or any setup that requires extending reach without complex network reconfiguration.

Technical Details of StarTech.com 10/100 Ethernet Extender Kit

• Distance: Up to 0.5 miles (800 meters) over a single pair copper wire

• Data rate: 10/100 Mbps Ethernet

• Cable type: Standard single-pair UTP wiring; link established via RJ-45 interfaces

• Connectors: RJ-45 on both ends; two-unit transmitter/receiver pair

• Power: Requires appropriate power supply per unit for operation

How to install StarTech.com 10/100 Ethernet Extender Kit

• Plan the deployment: Identify the primary network location (router or switch) and the remote site where the IP camera or WiFi AP will reside. Confirm the total distance does not exceed 0.5 miles (800 meters) and ensure a suitable path for a single-pair copper link.

• Connect the primary unit to the network: Use a standard RJ-45 Ethernet cable to connect the transmitter unit to your switch or router. Ensure the power source for the unit is available and properly connected according to the installation guidelines for your environment.

• Lay the single-pair link: Run a single-pair twisted pair copper cable between the two extenders. Keep the pathway as clean as possible, avoiding sharp bends and sources of electrical interference where feasible. If required, use appropriate cable management so the long run remains secure and accessible for maintenance.

• Install the remote unit near the target device: Position the receiver unit adjacent to the IP camera or wired access point. Connect the device to the remote extender using a standard RJ-45 patch cable and provide power as needed by your installation.

• Test and optimize: Power both extenders and verify link indicators reflect a healthy connection. Test the connected devices (IP camera and/or AP) to confirm proper network operation. If performance is suboptimal, adjust the physical placement to minimize interference and ensure a stable link.

Frequently asked questions

• What is the maximum distance supported by the Ethernet Extender Kit?

  The kit supports up to 0.5 miles (800 meters) over a single pair copper wire, making it ideal for remote IP cameras or WiFi APs where direct cabling is impractical.

• Can I use this extender with any IP camera or WiFi AP?

  Yes. The extender provides a 10/100 Mbps Ethernet link, so any standard 10/100 Ethernet device such as IP cameras and wired access points that fit within that bandwidth will work.

• Do I need a specialized software or driver?

  No. This is a hardware-based LAN extension solution that operates at the physical layer, requiring no software installation or configuration beyond standard network setup.

• Is Gigabit Ethernet supported?

  The extender supports 10/100 Mbps Ethernet only; it does not support gigabit (1000 Mbps) speeds. For higher bandwidth needs, consider upgrading to a higher-speed extender or adjusting your network architecture.

• Do both ends require power?

  Yes. Each extender unit typically requires its own power supply to operate, so ensure both the transmitter and receiver are powered during use.