StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km

StarTech.comSKU: 3296077

Price:
Sale price$376.50

Description

StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km

This description highlights how the StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km enables long-haul Ethernet connectivity between copper and fiber networks. Designed for reliability in data centers, campus networks, and field deployments, this kit converts 10/100 Mbps Ethernet signals into optical signals suitable for single-mode fiber over extended distances. With SC connectors for fiber and a compact, fanless chassis, it delivers a cost-effective, plug-and-play solution to bridge Ethernet devices across substation yards, remote facilities, or distributed office locations. Its WDM capability optimizes fiber use, reduces fiber count, and helps IT teams maximize existing cabling while maintaining performance and security. Whether you’re extending a legacy network or linking two buildings on opposing ends of a campus, this StarTech offering provides a robust, scalable bridge between copper and fiber with minimal configuration and downtime.

  • Extend 10/100 Mbps Ethernet across fiber: Seamlessly convert electrical Ethernet signals to optical signals for long-distance links, preserving network performance without requiring a complete overhaul of existing copper infrastructure.
  • Single-Mode WDM fiber technology: Employs wavelength-division multiplexing to maximize bandwidth efficiency over single-mode fiber, enabling direct connections over up to 20 kilometers with low latency and high signal integrity.
  • SC fiber connectors for reliability: Rugged, widely adopted SC connectors ensure secure, easy mating and stable operation in data centers, telecom rooms, and outdoor environments where harsh conditions or limited space demand dependable interfaces.
  • Plug-and-play simplicity: Designed for quick deployment with minimal IT overhead; no complex software configuration required in typical setups, making it ideal for network upgrades, branch expansions, and disaster recovery scenarios.
  • Compact, durable design for demanding environments: A sturdy enclosure supports rack-mount or desktop placement, supports passive cooling, and integrates neatly into equipment cabinets and telecom closets without adding clutter.

Technical Details of StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km

  • Ethernet interface: 10/100 Mbps Ethernet on RJ-45 port
  • Fiber interface: SC single-mode fiber port with WDM capability
  • Distance capability: Up to 20 kilometers over single-mode fiber
  • Technology: WDM-based fiber media conversion linking copper Ethernet to fiber optic networks
  • Connector types: RJ-45 for Ethernet, SC for fiber
  • Operating principle: Bidirectional communications through active wavelength management on single-mode fiber
  • Form factor: Compact media converter kit suitable for shelf, rack, or desktop installations

How to install StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km

  • Step 1: Plan the link route between your Ethernet device (switch, router, or NIC) and the remote device; ensure the fiber path is clear and the fiber type is single-mode SC-compatible cable rated for the 20 km distance.
  • Step 2: Connect the Ethernet device to the media converter’s RJ-45 port using a standard Cat5e/Cat6 Ethernet cable; verify that the device is set to 10/100 Mbps as appropriate for your network.
  • Step 3: Attach the SC fiber patch cables to the fiber port on the media converter and to the corresponding SC port on the remote media converter or fiber termination point; ensure proper polarity and clean connector surfaces for optimal signal integrity.
  • Step 4: Power on the unit using the supplied power adapter and verify the LED indicators show link and activity on both the Ethernet and fiber sides; if available, align wavelength settings as required by your WDM configuration.
  • Step 5: Run basic connectivity tests, such as pinging the remote Ethernet device and transferring a small data payload to ensure the link is stable and performing within expected 10/100 Mbps parameters.

Frequently asked questions

  • What network speeds does this converter support? It supports 10/100 Mbps Ethernet on the copper side and converts to fiber for long-distance transmission using single-mode WDM technology. It is not designed for Gigabit Ethernet on the copper side.
  • What distance can I reach with this kit? The configuration supports up to 20 kilometers over single-mode fiber, depending on fiber quality, connector integrity, and environmental conditions.
  • What connector types are used? The copper side uses an RJ-45 Ethernet port, while the fiber side uses SC connectors for the single-mode fiber link.
  • Do I need special software or drivers? No driver installation is typically required; the device operates as a standard media converter and is designed for plug-and-play deployment in most network topologies.
  • Can I use this kit in a campus or data center environment? Yes. Its compact, rugged enclosure and passive cooling are suited for rack-mount or desktop deployments in data centers, telecom rooms, and campus network closets.
  • Is WDM necessary for my deployment? WDM enables efficient use of a single fiber strand by multiplexing signals; if your link plan requires maximizing fiber use or extending over long distances, WDM is advantageous.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed