StarTech.com 10 Pack HPE J8177C Compatible SFP Module – 1000BASE-T RJ45 Copper Transceiver

Experience reliable, cost-effective Gigabit Ethernet connectivity with the StarTech.com 10-pack of HPE J8177C compatible SFP modules. These copper transceivers are designed, programmed, and tested to work seamlessly with HP® brand switches and routers, delivering performant 1 Gbps connectivity over standard copper cabling. With support for 1000BASE-T and RJ-45 connections over Cat5e or Cat6 cables, these SFP modules are ideal for upgrading existing networks, extending reach to closet switches, or replacing aging copper transceivers without sacrificing compatibility or performance.

• 1 Gbps Ethernet over copper with a reliable 1000BASE-T interface, using an RJ-45 copper port for easy integration into existing networks.
• Ten-pack bundle for bulk deployments, MSPs, or network upgrades, providing cost-efficient procurement and simplified asset management.
• Broad HP/HPE compatibility — tested to work with HP ProCurve and other HP-brand switches and routers that support 1000BASE-T copper SFP transceivers.
• Supports Cat5e and Cat6 copper cabling up to 100 meters, enabling flexible uplinks from racks and data closets to the core network.
• Plug-and-play, hot-swappable form factor designed for SFP slots in compatible devices, enabling quick swaps during maintenance windows without downtime when supported by the host equipment.

Technical Details of StarTech.com 10 pack HPE J8177C Compatible SFP Module

• Product type: SFP Copper Transceiver Module (1000BASE-T)
• Compatibility: HP/HPE switches and routers that support J8177C copper SFPs; HP J8177C compatible
• Interface: 1 x RJ-45 copper port for 10/100/1000 Mbps Ethernet
• Data rate: 1 Gbps (Gigabit Ethernet)
• Standard: 1000BASE-T
• Cable type: Cat5e or Cat6 copper cabling recommended for 1000BASE-T
• Distance (link length): Up to 100 meters with compliant copper cabling
• Wavelength: Not applicable (copper-based transceiver)
• Form factor: SFP (Small Form-factor Pluggable)
• Package quantity: 10 modules per pack
• Operating temperature: Typical data-center and enterprise ranges suitable for standard network environments
• Brand compatibility: StarTech.com 10-pack, designed for compatibility with HP J8177C specifications

How to install StarTech.com 10 pack HPE J8177C Compatible SFP Module

• Power down the device or prepare for a hot-swap if your HP/HPE equipment and network policy allows hot-swapping SFP modules.
• Identify an available SFP slot on the HP/HPE switch or router that supports 1000BASE-T copper transceivers.
• Grasp the SFP module by its sides and align it with the connector in the SFP slot. Gently insert until the module is firmly seated and you hear or feel a click indicating proper engagement.
• Attach a Category 5e or Category 6 copper Ethernet cable to the RJ-45 port on the SFP module. Route the cable to the connected device, ensuring cable length and shielding meet your deployment requirements.
• Power on the device if you powered down, or resume normal operation. Verify link status on the switch/router—look for the link LED indicators and confirm 1 Gbps operation in the device’s management interface or status LEDs.

Frequently asked questions

• Q: Is this StarTech.com 10-pack compatible with my HP/HPE switch or router?
• A: Yes. The modules are designed as HP J8177C compatible copper SFP transceivers and have been tested to work with HP brand switches and routers that support 1000BASE-T copper SFPs. Always verify compatibility with your specific hardware model and firmware version.
• Q: What cable should I use with 1000BASE-T copper SFPs?
• A: You should use Category 5e (Cat5e) or Category 6 (Cat6) copper Ethernet cables. Cat5e is sufficient for most 1 Gbps applications, while Cat6 can offer better performance in higher-density deployments or longer runs within the 100-meter limit.
• Q: How far can I run the connection?
• A: The typical maximum link length for 1000BASE-T copper with these SFPs is up to 100 meters, depending on cable quality and installation conditions.
• Q: Do I need special drivers or firmware?
• A: In most cases, these SFP modules are automatically detected by HP/HPE devices as standard 1000BASE-T copper SFPs. Ensure your device firmware is up to date and that the SFP slot is enabled in the device's management interface.
• Q: How many modules come in one package?
• A: Each package includes 10 compatible SFP transceiver modules, making bulk deployments straightforward and cost-effective.
• Q: Can I mix these with other SFP types?
• A: Yes, you can mix copper 1000BASE-T SFPs with other fiber or copper SFP modules in a compatible chassis or switch, as long as the devices support the respective SFP types and speeds.