StarTech.com 4 Port Gigabit Power over Ethernet PCIe Network Card - PSE / PoE PCI Express NIC

Enhance your networking capabilities with the StarTech.com 4 Port Gigabit Power over Ethernet PCIe Network Card - PSE / PoE PCI Express NIC. This advanced network interface card (NIC) is designed to streamline your network setup while providing efficient power delivery. The ST4000PEXPSE allows you to connect and power up to four devices through a single PCI Express slot, revolutionizing your workspace with minimal cable clutter and enhanced functionality.

• Seamless Power and Data Delivery: Each of the four Gigabit ports can deliver up to 25.5W of power, ensuring efficient operation of your network devices. By combining power and data transmission over a single Ethernet cable, you can minimize cable clutter and enhance the aesthetics of your workspace.
• Compliance with PoE Standards: The StarTech.com PCIe Network Card is fully compliant with the IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE). This guarantees reliability when powering compliant devices without requiring additional power sources.
• Supports Multiple Devices: Perfect for powering various remote PoE devices such as IP cameras, IP phones, and wireless access points, this network card ensures that your devices remain connected and operational without the hassle of messy power adapters.
• Advanced Networking Features: The PoE network card supports advanced features such as Jumbo Frames (up to 9KB), VLAN tagging, and Wake on LAN (WoL). These features optimize your network performance and provide flexibility in efficiently managing your devices.
• Easy Installation and Compatibility: The ST4000PEXPSE is compatible with any standard profile PCIe-enabled client, server, or workstation, making it a versatile choice for various IT environments. Installation is straightforward and hassle-free.

Technical Details of the Product

• Four 10/100/1000 Mbps compatible PoE RJ45 ports
• Power Sourcing Equipment (PSE) supports up to 48V, 25.5 Watts maximum output per port
• Built-in SATA and LP4 Molex power connector
• Up to 9K Jumbo Frame support
• Wake-on-LAN (Remote Wake-up) support
• Supports Pair Swap, Polarity, and Skew Correction

How to Install

Installing the StarTech.com 4 Port Gigabit PoE PCIe Network Card is a straightforward process. Follow these steps for a successful installation:

1. Power off your computer or server and unplug it from the power source.
2. Open the case of your computer to access the PCI Express slots.
3. Locate an available PCI Express slot on your motherboard and gently insert the PoE network card into the slot.
4. Secure the card with screws if necessary and connect the built-in SATA or LP4 Molex power connector to your power supply.
5. Close the case and reconnect the power supply.
6. Power on your computer and install the necessary drivers as directed by the product's manual.

Frequently Asked Questions

• What devices can I power with the StarTech.com 4 Port Gigabit PoE Network Card? You can power a variety of PoE devices such as IP cameras, VoIP phones, and wireless access points that comply with the IEEE 802.3at standard.
• Do I need to use a separate power supply for the network card? No, the StarTech.com PoE PCIe Network Card provides power directly through the Ethernet cable to your PoE-enabled devices, eliminating the need for additional power supplies.
• Is the network card compatible with all operating systems? The network card is generally compatible with most operating systems, but it's always recommended to check the manufacturer’s website for specific driver support.
• Can I use the card in a workstation or server? Yes, the StarTech.com PoE Network Card is designed to work in any standard profile PCIe-enabled workstation or server, making it suitable for various environments.
• How much power can each port deliver? Each port can deliver up to 25.5 watts of power, which is sufficient for most PoE devices.