StarTech.com Brocade 10G-SFPP-LR Compatible SFP+ Module - 10GBASE-LR, 10GbE SMF Transceiver

The StarTech.com Brocade 10G-SFPP-LR Compatible SFP+ Module delivers enterprise-grade performance for professional networks requiring reliable, long-range 10 Gigabit Ethernet connectivity. Designed to seamlessly integrate with Brocade switches and routers, this 10GBASE-LR SFP+ transceiver delivers robust, high-speed links over single-mode fiber (SMF) with industry-standard, hot-pluggable form-factor. Built to meet strict data-center and enterprise deployment demands, it combines dependable interoperability, precise optics, and proactive diagnostics to minimize downtime and maximize uptime in mission-critical networks.

• Compatibility and interoperability: Engineered to work flawlessly with Brocade-branded devices and other OEM platforms that adhere to the SFP+ and 10GBASE-LR standards. This module follows MSA guidelines for easy integration into existing 10 GbE infrastructures, ensuring consistent performance across switch ports and fiber backbones. Whether upgrading an uplink or extending a core link, this transceiver provides a reliable, plug-and-play experience for network engineers and administrators.
• Long-reach, high-performance optics: This 10GBASE-LR transceiver uses a 1310 nm laser and single-mode fiber to deliver stable, high-bandwidth links up to 10 kilometers. The LR optics are optimized for backbones, campus networks, and data-center interconnects, where distance and fidelity matter. Expect low insertion loss, precise signaling, and consistent 10 Gbps throughput across the full reach, with excellent power budgets for diverse fiber layouts.
• Digital Diagnostics Monitoring (DDM) and reliability: Equipped with DDM capabilities, the module continuously monitors critical parameters such as optical transmitter power, receiver power, temperature, supply voltage, bias current, and transceiver health. This visibility supports proactive maintenance, accurate link budgeting, and rapid troubleshooting, helping to prevent unexpected outages and to streamline network administration.
• Ease of installation and operation: The SFP+ form factor is designed for straightforward hot-swapping in compatible devices, minimizing downtime during upgrades or maintenance. An LC duplex fiber connection complements the transceiver, delivering a clean, low-loss link to SMF networks. The component adheres to industry standards for straightforward integration with a wide range of switches, routers, and optical fiber networks.
• Energy efficiency and deployment versatility: Compact and power-efficient, this transceiver is ideal for dense 10G deployments in data centers, enterprise networks, and service provider environments. It supports flexible deployment scenarios—from uplinks in top-of-racK aggregation to long-haul interconnects—while delivering dependable performance with minimal thermal and power impact.

Technical Details of StarTech.com Brocade 10G-SFPP-LR Compatible SFP+ Module

• Transceiver type: SFP+ LR (10GBASE-LR)
• Data rate: 10 Gbps
• Wavelength: 1310 nm
• Fiber type: Single-Mode Fiber (SMF)
• Connector: LC duplex
• Reach: Up to 10 kilometers
• Diagnostics: Digital Diagnostics Monitoring (DDM)
• Standards: IEEE 802.3ae 10GBASE-LR, MSA SFP+
• Hot-pluggable: Yes
• Compatibility: Brocade switches/routers compatible with StarTech OEM standards
• Module form factor: SFP+ pluggable transceiver
• Operating temperature: Typical commercial range (0 to 70°C, dependent on chassis and installation)
• Certification: RoHS-compliant; compliant with industry safety and interoperability guidelines

How to install StarTech.com Brocade 10G-SFPP-LR Compatible SFP+ Module

Before installation, confirm that your network device supports 10GBASE-LR SFP+ modules and that firmware is up to date to maximize compatibility with Brocade and StarTech components. Ensure you have the appropriate SMF fiber with LC connectors prepared and free from dust or contamination. Power down the device only if your environment requires it; in many cases, hot-swapping is supported, allowing you to insert or replace the SFP+ module without powering down the entire system. To install, align the SFP+ module with the slot, and gently insert until it seats with a distinct click. Attach the LC duplex fiber to the connector, aligning the transmit (Tx) and receive (Rx) lanes as required by your topology. After seating the module, power on or confirm the device recognizes the transceiver. Use the DDM interface to verify real-time status such as optical power, temperature, and voltage; verify link status via the device management console or LED indicators. For optimal performance, ensure that fiber connections are clean, connectors are snapped in securely, and fiber cables follow neat routing to avoid strain or bend losses. If you are upgrading a link, test the new module in a controlled segment first to verify stability, then progressively traffic-shape as needed. Always handle optical components with care, avoiding contact with the connector ends and keeping dust caps installed when the ports are not in use. This approach helps maintain alignment, minimizes back-reflection, and ensures the full 10 km reach is achievable in your network environment.

Frequently asked questions

• Q: Is this module compatible with Brocade switches and routers?
  A: Yes. The StarTech.com 10G-SFPP-LR module is designed to be compatible with Brocade-brand devices and other OEM platforms that support SFP+ LR optics, providing reliable 10 GbE connectivity in Brocade deployments.
• Q: What is the reach and fiber type?
  A: The module uses 1310 nm laser optics on single-mode fiber and supports links up to 10 kilometers, making it ideal for core networks, data-center backbones, and long-haul interconnects.
• Q: Does it support Digital Diagnostics Monitoring (DDM)?
  A: Yes. DDM provides real-time visibility into temperatures, voltages, optical power, and transceiver health, enabling proactive monitoring and faster troubleshooting.
• Q: What connector does this module use?
  A: It utilizes an LC duplex fiber connector, designed for high-quality, low-loss SMF connections and standard LC-to-LC fiber configurations.
• Q: Is installation hot-swappable?
  A: Yes. The SFP+ form-factor supports hot-swapping in compatible devices, allowing you to replace or upgrade without powering down the entire system—minimizing downtime.
• Q: Is this a genuine StarTech product?
  A: The module is StarTech-branded and designed for interoperability with Brocade devices and other OEM platforms, delivering dependable 10 GbE performance in professional networks.