StarTech.com Brocade 44W4408 Compatible SFP+ Module – 10GBASE-SR MMF Transceiver

The StarTech.com Brocade 44W4408 Compatible SFP+ Module delivers dependable 10 Gigabit Ethernet over multimode fiber, designed to seamlessly replace the Brocade 44W4408 option in your data center or campus network. This high-performance 10GBASE-SR SFP+ transceiver is engineered for reliability, superb reach on MMF, and plug-and-play compatibility with a range of switch fabrics. With Digital Diagnostic Monitoring (DDM) support, you gain real-time visibility into critical operating parameters, empowering proactive maintenance and uninterrupted connectivity.

• Optimal 10GBASE-SR performance over multimode fiber: This SFP+ module enables 10 Gigabit Ethernet transmissions over MMF with a typical reach of up to 300 meters on OM3/OM4 fiber, making it ideal for data center rack-to-rack uplinks, server-to-switch connections, and uplinks between aggregation layers. The 850 nm single-VCSEL laser design provides clean, stable signaling to meet the demands of modern 10GbE networks.
• DDM-enabled diagnostics for proactive maintenance: Digital Diagnostics Monitoring (DDM) support gives you live insight into essential parameters such as optical power, temperature, laser bias current, and supply voltage. This visibility helps reduce downtime, improve fault isolation, and simplify compliance with service-level targets across dense, high-performance networks.
• Vendor-aligned compatibility with Brocade 44W4408: Built to align with the Brocade 44W4408 specification, this module ensures reliable interoperability with compatible switches and fabric environments. It’s a cost-effective alternative to OEM parts while preserving performance, reliability, and easy integration into your existing infrastructure.
• Compact, hot-swappable SFP+ form factor with easy installation: The slim SFP+ heat-dissipation design fits into standard SFP+ ports, supporting hot-swapping to minimize network downtime. No re-cabling or complex configuration is required—just insert, secure, and connect your MMF fiber strands into the LC duplex connectors for immediate 10GbE operation.
• Durable build and dependable performance for data-center workloads: Engineered for continuous operation in data centers and enterprise networks, this transceiver is designed to withstand typical rack environments. Its robust construction, RoHS-compliant materials, and StarTech support ensure reliability for long-term deployments and mission-critical applications.

Technical Details of StarTech.com Brocade 44W4408 Compatible SFP+ Module

• - Get this information from the "specifications" section of the product from https://ec.synnex.com/ using product "UPC" or "SKU" as reference

How to install StarTech.com Brocade 44W4408 Compatible SFP+ Module

• Power down the affected network device (switch/router) and unplug it from the power source to prevent static discharge and ensure a safe installation.
• Identify the correct SFP+ port and prepare the fiber—use a clean, lint-free cloth and fiber cleaning solution to ensure the LC connectors are free of dust or oils that could impede signal integrity.
• Carefully orient the SFP+ module with the notch aligned to the slot and slide it firmly into the switch’s SFP+ port until it clicks into place. Do not force the module; if it does not seat properly, remove and reinsert with gentle pressure.
• Connect the multimode fiber to the LC duplex connector on the transceiver, ensuring the transmit (Tx) and receive (Rx) orientations are matched to the corresponding ports on your devices. Use only suitable OM3/OM4 fiber per your network plan.
• Power on the device and verify link status via the switch’s management interface. Check the transceiver’s DDM data (if available) and confirm that the optical power, temperature, and voltage readings are within expected ranges.
• Test end-to-end connectivity with a representative traffic pattern to validate throughput and latency targets. If performance issues arise, consult your network’s optical budget and verify fiber integrity, connector quality, and port configuration.

Frequently asked questions

• Q: Is this StarTech module fully compatible with all Brocade switches?
  A: The module is designed to be compatible with the Brocade 44W4408 specification and similar SFP+ ports. It’s recommended to verify compatibility with your specific switch model and firmware version to ensure optimal interoperability.
• Q: What distance can I expect with 10GBASE-SR over MMF?
  A: For 10GBASE-SR over OM3/OM4 multimode fiber, you can typically achieve up to 300 meters of reach, depending on fiber quality and network design. Distances may vary by fiber type and vendor implementations.
• Q: Does this transceiver support DDM?
  A: Yes, this module includes Digital Diagnostics Monitoring (DDM) to monitor critical parameters such as optical power, temperature, and supply voltage in real time, aiding proactive maintenance and troubleshooting.
• Q: How do I replace a faulty transceiver with this module?
  A: Power down the device, remove the existing SFP+ module, insert the StarTech module into the same port, secure it, power the device back on, and verify link status through the management interface.
• Q: Can I use this module in non-Brocade equipment?
  A: While designed for Brocade 44W4408 compatibility, many SFP+ modules work across multiple vendor ports with matching 10GBASE-SR specifications. Always confirm vendor compatibility and firmware constraints before deployment.