StarTech.com Brocade XG-LR Compatible SFP+ Module - 10GBASE-LR

Introducing the StarTech.com Brocade XG-LR Compatible SFP+ Module, a high-performance optical transceiver meticulously engineered for Brocade brand switches and routers. This 10GBASE-LR module promises reliable data transfer over single-mode fiber, making it an essential addition to your networking toolkit. Designed for critical, high-throughput networks—data centers, campus backbones, and enterprise infrastructure—it delivers consistent, low-latency connections across long distances. The module’s SFP+ form factor ensures plug-and-play installation, while its broad compatibility and robust build quality provide peace of mind for IT teams managing growing bandwidth demands. Whether you are upgrading a backbone link, extending a campus network, or deploying a new 10GbE core, this transceiver offers the performance, reliability, and compatibility you require. With StarTech’s renowned quality and Brocade-focused design, you get a trusted solution that reduces network chokepoints while simplifying procurement and maintenance for multi-vendor environments.

• Unmatched compatibility: Specifically tested and validated to work with Brocade XG-LR gear while maintaining StarTech’s compatibility guarantees, ensuring seamless integration into existing Brocade deployments without surprise interoperability issues.
• Long-reach single-mode fiber support: 1310 nm wavelength enables high-performance 10 gigabit links over single-mode fiber up to 10 kilometers, empowering remote campus links and data-center spines with minimal latency and no intermediate amplification.
• Hot-pluggable SFP+ form factor: Fits standard SFP+ slots in switches and routers, allowing quick upgrades and maintenance with minimal downtime and no comprehensive re-cabling required.
• Digital Diagnostics Monitoring (DDM): Real-time monitoring of critical parameters such as optical transmitter power, laser bias current, and temperature, facilitating proactive maintenance and rapid fault isolation.
• Low power, high efficiency: Energy-conscious design delivers reliable 10 Gbps performance while helping to manage overall data-center power budgets and cooling needs, contributing to a greener network footprint.

Technial Details of StarTech.com Brocade XG-LR Compatible SFP+ Module

• Product type: SFP+ transceiver module
• Model name: StarTech.com Brocade XG-LR Compatible SFP+ Module
• Standard: 10GBASE-LR
• Interface: SFP+ (Small Form-factor Pluggable Plus)
• Wavelength: 1310 nm
• Fiber type: Single-mode fiber (SMF)
• Distance capability: Up to 10 kilometers on SMF
• Connector type: LC duplex
• Diagnostics: Digital Diagnostics Monitoring (DDM) supported
• Compatibility: Designed for Brocade XG-LR systems; tested for reliable interoperability with StarTech quality guarantees
• Data rate: 10 Gbps
• Form factor compliance: Standard SFP+ hot-plug compliant

how to install StarTech.com Brocade XG-LR Compatible SFP+ Module

Installing this transceiver is straightforward and designed for minimal disruption to your network. Before installation, verify that your Brocade switch or router supports third-party SFP+ modules and that your device firmware is up to date. Handle the module with care, avoiding contact with the laser window and keeping fiber endpoints clean. To install:

• Power down the port or follow your vendor’s hot-plug guidelines if your equipment supports non-disruptive insertion.
• Hold the SFP+ module by its edges and align it with the SFP+ slot, ensuring the connector faces the device’s interior. Insert firmly until you hear or feel the click of the latch engaging securely.
• Connect a clean LC duplex single-mode fiber optic cable to the LC connectors on the transceiver and the corresponding device, making sure to mate properly and avoid excessive bending of the fiber.
• If your device supports hot-plug, re-energize the port or the device as directed by your hardware vendor, and monitor the port indicators for link activity. For non-hot-plug configurations, power up the unit after seating the transceiver.
• Access the network management interface or command-line tools to confirm that the transceiver is recognized, the link has come up at 10 Gbps, and the optical signal levels are within expected ranges. Validate that DDM Readouts (if available) report nominal values and no faults.
• Run a basic connectivity test between endpoints and perform a throughput check to verify performance matches your expectations. If issues arise, reseat the module, verify fiber integrity, and check firmware compatibility with third-party transceivers.

Frequently asked questions

• Q: What is 10GBASE-LR? A: 10GBASE-LR is a 10 gigabit Ethernet standard designed for long-reach connections over single-mode fiber, typically up to 10 kilometers, using 1310 nm wavelength and LC connectors. It is ideal for connecting data centers, core networks, and remote sites with high bandwidth requirements.
• Q: Is this module compatible with other vendors’ equipment? A: The transceiver is specifically designed for Brocade XG-LR compatibility and is tested to work with StarTech's compatibility assurances. Many networks using third-party SFP+ modules allow interoperability with other vendors that support 10GBASE-LR; however, always verify vendor policies and perform validation testing before deployment in production.
• Q: Does the module support Digital Diagnostics Monitoring (DDM)? A: Yes. DDM provides real-time data on optical power, temperature, and other critical transceiver parameters, helping IT teams monitor link health and plan maintenance proactively.
• Q: How do I verify the module is recognized by my device? A: After installation, use the device’s management interface or CLI to check for the SFP+ presence, link status, speed negotiation (10 Gbps), and optical receive/transmit metrics. LED indicators on the port can also signal link activity.
• Q: What should I do if the link fails? A: First, ensure the fiber is properly connected and clean. Confirm the module is seated correctly and that the cable is the correct SMF type with LC connectors. Check firmware compatibility for third-party transceivers and review vendor recommendations. If issues persist, test with a known-good module or port to isolate the fault.
• Q: What is the warranty? A: StarTech offers a standard limited warranty on this SFP+ module. For full terms, refer to the product page or contact StarTech support.