StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver - 10GBASE-BX-D WDM SFP+ (10 Gbps)

Powerful, reliable, and incredibly versatile, the StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver is designed to elevate your network’s performance while ensuring seamless interoperability with Cisco switches and routers. This 10GBASE-BX-D-60 WDM SFP+ transceiver delivers full-duplex 10 Gbps data rates over long-haul links, enabling high-density deployments in data centers, service provider networks, and enterprise campuses. Built to meet rigorous standards and tested for interoperability, it’s the ideal choice when you need a drop-in replacement that preserves Cisco-based infrastructure investments.

• High-speed 10 Gbps performance: The transceiver supports a data rate of 10 Gbps, enabling fast, reliable uplinks and downlinks for core-to-access connectivity, virtualized workloads, and bandwidth-intensive applications. It’s an economical path to scale without replacing entire network ecosystems.
• Cisco SFP+ compatibility with StarTech reliability: Engineered to be fully compatible with Cisco SFP+ ports, this transceiver integrates effortlessly into Cisco-based networks, minimizing field configuration and ensuring predictable behavior with carrier-grade devices.
• Long-haul WDM optics for single-mode fiber: Leveraging 1490 nm transmit and 1310 nm receive wavelengths in a WDM configuration, the module is optimized for long-distance, single-mode fiber links. The BX-D design enables duplex communication on a single fiber pair, reducing fiber plant requirements and lowering operational costs.
• Easy installation and maintenance-free operation: Snap-in SFP+ form factor provides plug-and-play installation with hot-swappable capability. No additional power supplies or complex drivers are needed; simply install, connect fiber, and configure at the switch or router level.
• Durable, tested interoperability for enterprise-grade networks: Built to withstand routine deployment environments, the transceiver is rigorously tested to serve in data centers, campus networks, and service provider backbones—delivering consistent performance across hardware refresh cycles.

Technical Details of StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver

• Data Rate: 10 Gbps
• Transceiver Type: SFP+ BX-D (10GBASE-BX-D) with WDM capability
• Wavelengths: Transmit ~1490 nm / Receive ~1310 nm
• Fiber Type: Single-Mode Optical Fiber (SMF)
• Distance/Reach: Up to 60 km depending on fiber quality and optics configuration
• Connector: LC duplex
• Interface Standard: SFP+ hot-swappable module, compatible with Cisco SFP+ ports
• Modulation/Encoding: 10GBASE-BX-D WDM-based duplex transceiver design
• Operating Environment: Designed for data center and network equipment environments (standard commercial ranges)

how to install StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver

• Power down and prepare: Before handling any optical transceiver, power down your switch or router if recommended by your device manufacturer. Ground yourself to prevent static discharge and handle the module with care to avoid damage to connectors or optical surfaces.

• Locate a suitable SFP+ slot: Identify an available SFP+ port on your Cisco-compatible switch or router. Confirm that the device supports 10GBASE-BX-D transceivers and that LD/LDL configurations align with your fiber plan.

• Insert the transceiver: Align the module with the SFP+ slot and firmly push until it seats and the locking mechanism engages. You should hear or feel a click when the module is securely in place. Do not force it, and ensure the module’s notch aligns with the slot orientation.

• Connect the fiber:cables: Attach a compatible single-mode LC duplex fiber patch cable to the transceiver’s LC connectors. Ensure that you use the proper transmitter and receiver fiber directions, following the device’s port labeling (TX on the transmit side, RX on the receive side).

• Power on and verify: Power up the device or return it to service and check the link status LEDs on both ends of the connection. Use the switch’s management interface to verify the established 10 Gbps link, error rates, and potential alignment or OSNR (optical signal-to-noise ratio) concerns. If link issues arise, reseat the transceiver, re-check fiber orientation, and confirm fiber integrity with testing equipment if available.

Frequently asked questions

• Q: Is this StarTech transceiver a drop-in Cisco SFP+ replacement?

  A: Yes. It’s designed to be fully compatible with Cisco SFP+ ports, allowing you to retain your Cisco-based infrastructure while expanding capacity with a reliable 10 Gbps BX-D WDM link.

• Q: What fiber type and distance does it support?

  A: It supports single-mode fiber and is rated for long-haul deployments, typically up to 60 km under optimal conditions, thanks to the 1490 nm/1310 nm WDM wavelengths. Factor in splice losses, connectors, and fiber quality when planning actual links.

• Q: Do I need any special drivers?

  A: No drivers are generally required for SFP+ transceivers. They operate through the host device’s firmware and standard port configurations. Ensure your switch/router firmware is up to date for best interoperability.

• Q: Can I mix this transceiver with other vendors’ SFP+ modules?

  A: Interoperability can vary. While this module is designed for Cisco compatibility, always verify with your equipment vendor's interoperability guidelines before mixing brands in a production environment.

• Q: What maintenance is required?

  A: Regular inspections of fiber connectors, careful handling of the LC connectors, and dust-free fiber paths help maintain optimum performance. Keep the module clean, store spare components properly, and replace any damaged fiber cables promptly to avoid throughput degradation.