StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver Module - 10GBASE-BX SFP+ BiDi, 60km, with DDM

Upgrade your 10 Gigabit Ethernet network with a trusted, Cisco-compatible SFP+ transceiver that delivers long-range BiDi performance without overhauling your existing infrastructure. The StarTech.com Cisco SFP-10G-BX-D-60 compatible downstream transceiver is designed to work seamlessly with Cisco switches and routers that support 10GBASE-BX-D-60, offering a plug-and-play upgrade path for fiber-optic links. This robust, hot-swappable SFP+ module is crafted for reliability in data centers, campus networks, enterprise backbones, and service provider deployments where preserving your current fiber plant is crucial. It pairs with StarTech.com’s SFP-10G-BX-U-60-ST for full BiDi duplex operation, enabling bidirectional communication over a single strand of single-mode fiber and simplifying infrastructure management while optimizing fiber utilization.

• Cisco-compatible 10GBASE-BX-D-60 BiDi SFP+: Specifically tested to work with Cisco switches and routers that support 10GBASE-BX-D-60, ensuring interoperable performance and a worry-free upgrade path within existing networks.
• Long-range BiDi fiber with 60 km reach: Designed for single-mode fiber, this module enables high-speed links over long distances, allowing you to connect distant data center racks, campuses, or remote sites without a fiber refresh.
• Digital Diagnostics Monitoring (DDM): Built-in DDM provides real-time insight into optical power, temperature, supply voltages, and other critical health metrics, helping administrators monitor link quality and predict failures before they impact uptime.
• Interoperability with StarTech’s BX-U-60 transceiver: The downstream BX-D-60 module is designed to pair with StarTech.com’s BX-U-60 transceiver to complete BiDi duplex systems, enabling efficient, cost-effective dual-direction communication over a single fiber strand.
• Quality, reliability, and easy integration: Each transceiver is designed, programmed, and tested to meet high industry standards, delivering dependable performance in demanding data-center and enterprise environments while remaining hot-swappable with minimal downtime.

Technical Details of StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver Module - 10GBASE-BX SFP+ - 60km DDM

• Form Factor: SFP+ transceiver module (2.5 Gbps to 10 Gbps capable per standard SFP+ interfaces).
• Data Rate: 10 Gbps Ethernet (10GBASE-BX compatible) for high-throughput network connections.
• Wavelength (BiDi pair): Typical downstream Tx/Rx wavelengths for BX-D configurations (e.g., Tx around 1490 nm and Rx around 1550 nm) to support bidirectional single-fiber links.
• Fiber Type: Single-mode fiber (SMF) suitable for long-haul deployments and metropolitan links.
• Distance: Up to 60 kilometers, enabling extended coverage between distant network nodes without additional amplification or regeneration.
• Connector: LC duplex connector standard for SFP+ modules and compatible fiber patching.
• BiDi Operation: Bi-directional operation over a single fiber strand reduces the need for extra fiber counts, lowering cabling complexity and cost.
• Digital Diagnostics Monitoring (DDM): Supports real-time monitoring of critical parameters for proactive maintenance and rapid troubleshooting.
• Compatibility: Designed, programmed, and tested to work with Cisco 10GBASE-BX-D-60 environments as well as StarTech BX-U-60 counterparts for complete BiDi setups.
• Receiver/Transmitter Configuration: Independent TX/RX configuration aligned with BiDi standards to ensure proper alignment with compatible devices on both ends of the link.
• Operational Conditions: Rated for typical data-center temperature ranges and power specifications appropriate for 10G optical interfaces.
• RoHS Compliance: Built to industry environmental standards to minimize hazardous substances and support sustainable deployments.

How to install StarTech.com Cisco SFP-10G-BX-D-60 Compatible Transceiver Module - 10GBASE-BX SFP+ - 60km DDM

• Prepare and power down: Power down the network device and, if applicable, disconnect power to ensure safe handling during installation.
• Inspect and handle: Remove the transceiver from its anti-static packaging, handle by the edges, and avoid touching the optical connectors to prevent contamination.
• Insert into SFP+ slot: Align the transceiver with the SFP+ slot of the Cisco switch or router and firmly seat it until the latch engages, indicating a secure connection.
• Connect fiber and verify: Attach the LC duplex fiber patch cables to the transceiver and the corresponding ports, ensuring a clean, dust-free connection. Route cables to prevent strain or bending beyond recommended radii.
• Power up and monitor: Restore power to the device and verify link status. Use the device’s management interface or console to confirm the 10G link is up, then monitor DDM readings to ensure stable operation.

Frequently asked questions

• Is the StarTech SFP-10G-BX-D-60 compatible with Cisco devices? Yes. This downstream transceiver is designed, programmed, and tested to work with Cisco switches and routers that support 10GBASE-BX-D-60, providing reliable interoperability and a straightforward upgrade path for existing Cisco networks.
• What is the maximum distance supported by this transceiver? The transceiver supports up to 60 kilometers on single-mode fiber, enabling long-haul connections between distant network nodes without requiring additional equipment or optical amplification.
• Does it support DDM (Digital Diagnostics Monitoring)? Yes. DDM is supported, offering real-time monitoring of critical parameters such as optical power, temperature, and voltage to help maintain link reliability and quickly diagnose issues.
• Can I pair this BX-D-60 module with StarTech BX-U-60 for BiDi links? Yes. This downstream BX-D-60 transceiver is designed to pair with StarTech.com’s BX-U-60 transceiver to complete a BiDi duplex link over a single fiber strand, optimizing fiber utilization and reducing cabling requirements.
• What connector type does this module use? The module uses an LC duplex connector, which is the standard for SFP+ BiDi transceivers and compatible with typical LC patch cables and fiber setups.
• Is this a plug-and-play upgrade? In most Cisco deployments, yes. The module is designed for straightforward installation in SFP+ ports; however, ensure compatibility with your device’s firmware and licensing requirements for optimal operation.