StarTech.com Cisco SFP-10G-BX60D-I Compatible SFP+ Module – 10GBASE-BX BiDi SMF Transceiver

Upgrade your high-speed network with confidence using the StarTech.com Cisco SFP-10G-BX60D-I Compatible SFP+ Module. This 10GBASE-BX BiDi transceiver is engineered to deliver rapid, reliable performance in demanding enterprise environments while ensuring seamless compatibility with Cisco devices. Designed to fit SFP+ ports, this module enables bi-directional communication over a single strand of single-mode fiber (SMF), reducing fiber infrastructure costs without compromising throughput or reliability. Whether you’re expanding a data center, upgrading a campus backbone, or optimizing a WAN link, this StarTech module provides the precision, compatibility, and resilience you need for sustained 10 Gigabit Ethernet performance.

• BiDi 10GBASE-BX technology leverages bidirectional signaling on a single SMF strand, effectively halving the fiber count and simplifying fiber management while delivering full-duplex 10 Gbps performance for both uplink and downlink communications.
• Cisco-compatible SFP+ form factor ensures plug‑and‑play interoperability with Cisco switches and routers that support SFP+ modules, offering a reliable replacement or upgrade option that minimizes downtime and operational risk.
• Single-mode fiber (SMF) up to 60 km reach with precise 1310 nm/1550 nm bi-directional wavelengths, enabling long-haul connections between data centers, remote sites, or campus networks without repeaters or amplifiers.
• Efficient, easy integration with hot-swappable SFP+ design, rugged housing, and compatibility with standard LC duplex fiber interfaces—ideal for mixed-vendor networks and rapidly evolving infrastructures.
• Diagnostics and reliability features—support for Digital Diagnostics Monitoring (DDM) where available, robust build quality, and StarTech support—delivering confidence for mission-critical deployments and ongoing maintenance.

Technical Details of StarTech.com Cisco SFP-10G-BX60D-I Compatible SFP+ Module

• Transceiver type: SFP+ BiDi optical transceiver compatible with 10GBASE-BX standard
• Data rate: 10 Gigabits per second (10.3125 Gbps typical) enabling high-throughput links
• Wavelengths: Transmit at 1310 nm and receive at 1550 nm for BiDi operation over SMF
• Fiber type: Single-mode fiber (SMF) for long-distance connections
• Reach: Up to 60 km (approximately 37 miles) depending on fiber quality and link hardware
• Connector: LC duplex standard fiber connector for reliable optical interconnection
• Standards and compatibility: SFP+ MSA compliant; designed for Cisco SFP-10G-BX60D-I compatibility and cross‑vendor environments
• Diagnostics: Digital Diagnostics Monitoring (DDM) support where available to monitor optical power, temperature, and other key parameters
• Power and efficiency: Engineered for stable power consumption within typical SFP+ profiles and efficient operation
• RoHS and compliance: RoHS-compliant and built to meet rigorous industry standards

How to install StarTech.com Cisco SFP-10G-BX60D-I Compatible SFP+ Module

• Verify compatibility – Confirm that your Cisco device supports SFP+ 10GBASE-BX BiDi transceivers and that the fiber link plan matches SMF with LC duplex connectors.
• Power considerations – Power down the network device if required by your organization’s policy, or follow hot-swap procedures as per vendor guidance; many SFP+ modules support hot-swapping.
• Prepare the fiber – Ensure you have appropriate SMF LC duplex patch cables with the correct polish and end-face geometry. Clean and inspect connectors before mating to prevent contamination.
• Insert the module – Gently align the StarTech SFP+ module with the device’s SFP+ slot and slide it in until it clicks into place. Confirm the LED indicators on the transceiver and switch show a valid link state.
• Connect the fiber cable – Attach the LC duplex fiber patch cable to the transceiver and the corresponding port, making sure Tx/Rx directions are correctly aligned with the opposite end of the link.
• Configure on the switch – If required, enable 10GBASE-BX BiDi mode or equivalent settings on the Cisco device, and verify the interface recognizes the SFP+ module as a 10G link.
• Test and validate – Run end-to-end throughput tests and check for stable link status, signal integrity, and error-free frames. Use diagnostics if supported to monitor uptime and optical performance.

Frequently asked questions

• Is the StarTech Cisco SFP-10G-BX60D-I Compatible SFP+ Module truly compatible with Cisco devices? Yes. This module is specifically designed to be compatible with Cisco SFP+ ports that support 10GBASE-BX BiDi operation, providing a seamless, reliable upgrade path for mixed or Cisco-centric networks.
• What kind of fiber and distance can I expect? It uses single-mode fiber (SMF) with BiDi signaling to achieve up to 60 km on appropriate links, depending on fiber quality, connectors, and transceiver efficiencies.
• Do I need any special configuration? In many cases, plug-and-play operation is sufficient, but some Cisco devices may require enabling BiDi mode or confirming that the interface is set to 10GBASE-BX. Always verify on your specific device model.
• Does this module support diagnostics? Digital Diagnostics Monitoring (DDM) is supported where the host device and transceiver firmware provide it, allowing monitoring of optical power, temperature, and other performance metrics.
• What is the warranty or support coverage? StarTech products are typically backed by a limited warranty and access to technical support. Please check StarTech’s current policy for exact terms and duration.
• Can this module be used in multi-vendor environments? Yes. While designed for Cisco compatibility, the SFP+ BiDi module can operate in other vendors’ SFP+ ports that support 10GBASE-BX BiDi, provided the device vendor allows third-party transceivers in that slot.