StarTech.com Cisco SFP-10G-BX60U-I Compatible SFP+ Module – 10GBASE-BX BiDi SMF Transceiver

Unlock high-speed, reliable connectivity with this StarTech.com compatible SFP+ module designed to mirror Cisco’s 10GBASE-BX60U-I specifications. Engineered, programmed and tested to work seamlessly with Cisco switches and routers, this BiDi transceiver delivers precise 10 Gigabit Ethernet performance over single-mode fiber. Whether you’re upgrading a data center, extending a campus network, or refreshing aging optics, this module provides a cost-effective, plug‑and‑play solution that protects your existing Cisco investments while ensuring robust interoperability with StarTech’s BX60D-I series for cross-brand compatibility.

• High-speed 10GBASE-BX BiDi performance: This SFP+ module supports 10 gigabits per second over a single strand of SMF fiber using bidirectional (BiDi) optics, delivering fast, reliable data transmission for demanding workloads. The upstream TX and downstream RX wavelengths are optimized for long-distance links, enabling you to maximize fiber utilization without laying multiple fibers.
• Cisco BX60U-I compatibility and interoperability: Specifically engineered to pair with Cisco SFP+ ecosystems, this module is designed, programmed, and tested to work with 10GBase‑BX compatible Cisco switches and routers. It maintains Cisco-style performance, ensuring predictable behavior in mixed-vendor environments while protecting your hardware investments.
• Long-distance BiDi operation on SMF: Built for single-mode fiber, this transceiver supports extended reach—ideal for data centers, WAN extensions, and campus deployments. With BiDi optics, you can achieve substantial distances over a single fiber run, reducing cabling cost and complexity while preserving signal integrity.
• Reliable, plug‑and‑play installation: The module is designed for easy hot-swapping in compatible SFP+ ports. It installs into standard SFP+ slots with a clean, secure fit, and is rigorously tested to deliver stable link performance out of the box, with minimal configuration required in most Cisco environments.
• Quality you can trust from StarTech: Backed by StarTech’s engineering expertise and global support, the SFP-10G-BX60U-I-compatible module provides consistent performance with Cisco gear, backed by quality assurance, documentation, and ongoing support to help you optimize your network infrastructure.

Technical Details of StarTech Cisco SFP-10G-BX60U-I Compatible SFP+ Module

• Form Factor: SFP+
• Data Rate: 10 Gbps (10GBASE)
• Wavelengths: Transmit ~1310 nm (Tx), Receive ~1550 nm (Rx) BiDi configuration
• Fiber Type: Single-Mode Fiber (SMF)
• Distance/Reach: Up to 60 km (BiDi BX60U specification)
• Connector: LC duplex
• BiDi Operation: Yes, single-fiber BiDi transceiver
• Compatibility: Cisco SFP-10G-BX60U-I ecosystem; tested with Cisco switches/routers and StarTech BX60D-I counterparts
• Operating Conditions: Typical commercial operating range suitable for data-center and enterprise deployments
• Compliance and Quality: RoHS-compliant; designed, programmed and tested to meet Cisco BX60U-I expectations

How to install StarTech Cisco SFP-10G-BX60U-I Compatible SFP+ Module

• Power down or disable the target SFP+ port on your switch or router, if your device does not support hot-swapping for critical operations.
• Identify an available SFP+ slot and align the connector with the slot’s profile. Hold the module by its edges to avoid touching the optical connectors.
• Insert the module firmly into the SFP+ port until it seats completely and the locking mechanism engages with a click.
• Connect your single-mode fiber cable to the LC duplex connectors, ensuring the Tx/Rx orientation matches your network plan (Tx on one end corresponds to Rx on the other end).
• Power up or re-enable the port, then verify link status and light activity through your device’s management interface. Confirm 10G operation and monitor for any error counters during initial traffic tests.

Frequently asked questions

• Q: Is this module compatible with Cisco gear? A: Yes. It is designed to be compatible with Cisco SFP-10G-BX60U-I configurations and has been tested to work with Cisco switches and routers in BX60U-I deployments.
• Q: What fiber type does it require? A: It operates over Single-Mode Fiber (SMF) using BiDi optics.
• Q: What is the maximum reach? A: The unit supports distances of up to 60 km under BiDi BX60U specifications, depending on fiber quality and network conditions.
• Q: Can I mix this module with other vendors’ BX60D-I transceivers? A: In many scenarios, cross-vendor interoperability is supported, but always validate in a test environment to confirm stability and performance with your specific Cisco gear and other components.
• Q: Do I need any special drivers or software? A: No. Optical transceivers are typically recognized by the host device; no separate driver installation is required beyond standard device configuration.
• Q: Is the installation hot-swappable? A: Yes, this SFP+ module is designed for hot-swapping in compatible ports, though you should follow your device’s guidelines for safe handling during live operations.