StarTech.com Cisco SFP-10G-BXD-I Compatible SFP+ Module - 10GBASE-BX BiDi SMF Transceiver

The StarTech.com Cisco SFP-10G-BXD-I Compatible SFP+ Module is a high-performance, plug-and-play solution for upgrading or expanding your 10 Gigabit Ethernet backbone. Engineered to work seamlessly with 10GBase-BX capable Cisco switches and routers, this SFP+ transceiver delivers reliable, long-distance, fiber-based connectivity using a BiDi (bi-directional) single-mode fiber link. Designed for data centers, campus networks, and enterprise backbones, it combines easy installation with robust compatibility, enabling you to maximize your existing Cisco investment while enjoying faster, more efficient network performance.

• High-speed 10GBASE-BX BiDi performance: This SFP+ module supports 10 Gigabit per second data rates over BiDi single-mode fiber, delivering the efficiency and bandwidth needed for demanding workloads, server virtualization, storage replication, and real-time applications. Its BiDi design reduces fiber count and simplifies fiber management while maintaining excellent link quality and low latency.
• Bi-directional, single-mode fiber design (1310/1550 nm): The transceiver uses a BiDi wavelength combination with a 1310 nm transmitter and a 1550 nm receiver, enabling a compact, cost-effective 2-fiber pathway. This configuration minimizes fiber infrastructure and is ideal for longer-reach links between data centers and network cores.
• Cisco compatibility and StarTech reliability: Specifically designed to be compatible with Cisco SFP-10G-BXD-I ports and devices, this module provides a reliable alternative to branded optics without compromising performance or compatibility. The StarTech implementation emphasizes quality control, RoHS compliance, and long-term availability, helping you maintain consistent network behavior across upgrades.
• Easy deployment with standard SFP+ form factor: Engineered for seamless hot-swap into any standard SFP+ slot, the module requires no specialized tools or complex configuration. Simply insert the SFP+ transceiver into the available port, connect the corresponding single-mode fiber pair with LC duplex connectors, and you’re ready to establish a 10G link. This makes upgrades, replacements, and maintenance straightforward and downtime-minimal.
• Optimized for efficiency and enterprise scalability: In addition to delivering substantial bandwidth, the module is built with energy-conscious design considerations and a compact footprint that fits into dense rack environments. Its reliability supports high-uptime requirements for data centers and enterprise networks, while its compatibility with Cisco ecosystems helps preserve your existing network policies and management workflows.

Technical Details of [product]

• Product type: SFP+ transceiver module
• Standards supported: 10GBASE-BX BiDi
• Wavelengths (Tx/Rx): Transmit at 1310 nm; receive at 1550 nm (BiDi pair)
• Fiber type: Single-mode fiber (SMF)
• Connector type: LC duplex
• Data rate: 10 Gbps
• Interface: SFP+ hot-swappable module
• Compatibility: Cisco SFP-10G-BXD-I compatible; StarTech certified
• Form factor: SFP+ module suitable for standard 10GBASE network deployments

how to install StarTech.com Cisco SFP-10G-BXD-I Compatible SFP+ Module

Installing the StarTech.com Cisco SFP-10G-BXD-I Compatible SFP+ Module is straightforward and designed to minimize downtime. Follow these steps to ensure a successful deployment:

• Power down or place the host device in a maintenance window if required by your policy. This helps avoid any unexpected disruption while you perform hardware changes.
• Identify an available SFP+ slot on your Cisco switch or router. Verify that the slot is designated for hot-swappable SFP+ modules and that the device firmware supports Cisco SFP-10G-BXD-I compatible optics.
• Remove the existing module (if replacing) by carefully pulling it straight out of the slot, keeping the connector and port area clean from dust or debris. Handle the transceiver by its body, avoiding excessive force.
• Align the StarTech SFP+ module with the slot and gently insert it until it seats securely. You should feel a slight click as the module locks into place and the connector aligns with the port pins.
• Connect the single-mode fiber pair using LC duplex cables. Ensure the TX (transmitter) from the local side connects to the RX (receiver) on the remote side, and verify the correct fiber path to prevent cross-wiring. Do not twist or kink fibers; maintain proper bend radii as specified by your cabling standards.
• Power up the device or return it to service. Use the device’s management interface to confirm recognition of the SFP+ module and establish a 10G link. If the link does not come up immediately, consult the device logs for potential compatibility or firmware issues and confirm fiber continuity.
• Test the connection by generating traffic or running a throughput test. Verify link status, error counters, and performance metrics to ensure stable operation. If needed, adjust remote-end devices or perform a brief reset to optimize alignment and negotiation.
• Document the installation for future maintenance and ensure updated firmware on the host devices if required by Cisco compatibility guidelines.

Frequently asked questions

• Q: Is this module compatible with Cisco devices?
  A: Yes. The StarTech.com SFP-10G-BXD-I compatible SFP+ module is designed to work with Cisco switches and routers that support 10GBASE-BX BiDi transceivers, providing a reliable and Cisco-friendly option for upgrading your network.
• Q: What type of fiber should I use?
  A: Use single-mode fiber (SMF) to maximize reach and performance for BiDi 1310 nm/1550 nm operation. Ensure your fiber optic cables have LC duplex connectors to match the transceiver.
• Q: What wavelengths does the transceiver use?
  A: The BiDi configuration uses a 1310 nm transmitter and a 1550 nm receiver. This combination enables efficient BiDi operation over SMF while minimizing fiber utilization.
• Q: How do I install the module?
  A: Insert the SFP+ module into a compatible slot, connect LC duplex SMF fiber, ensure proper TX/RX alignment, power up, and verify link status via the device’s management interface. The process is designed to be plug-and-play with standard Cisco optics kits.
• Q: Can I hot-swap this module?
  A: Yes. The SFP+ module is designed for hot-swapping in standard Cisco SFP+ slots, allowing maintenance or replacement with minimal downtime in most enterprise and data center environments.