StarTech.com Citrix EW3P0000558 Compatible SFP+ Module - 10GBASE-LR

The StarTech.com Citrix EW3P0000558 Compatible SFP+ Module delivers enterprise-grade 10 Gigabit Ethernet connectivity with long-haul reach and precision reliability. Designed to work seamlessly in Citrix environments, this 10GBASE-LR transceiver is built for data centers, server rooms, and high-performance networks that demand fast, stable fiber connections. It combines a compact SFP+ form factor with robust optics, Digital Diagnostics Monitoring (DDM), and a single-mode fiber (SMF) footprint to support quiet operation and proactive maintenance. Whether you’re upgrading an aging uplink, expanding a storage network, or optimizing inter-rack communication, this module offers dependable performance, straightforward installation, and multi-vendor interoperability that your IT team can trust.

• High-speed, long-reach performance: 10GBASE-LR delivers 10 gigabits per second over single-mode fiber for distances up to 10 kilometers, enabling scalable uplinks between data centers, campus networks, and critical core links without sacrificing signal integrity.
• Citrix-ready compatibility: Specifically tested and documented to be compatible with Citrix EW3P0000558 configurations, helping you maintain a smooth, predictable network integration when deploying Citrix workloads and services.
• Single-mode fiber with LC duplex: Utilizes a standard LC duplex optical interface and single-mode fiber (9/125 µm), offering low attenuation and excellent link budgets for long-haul transmissions in demanding environments.
• DDM enabled for proactive management: Digital Diagnostics Monitoring provides real-time insight into temperature, supply voltages, current, optical transmit/receive power, and other critical parameters—facilitating preventive maintenance and rapid issue isolation.
• Easy deployment and reliability: As a hot-pluggable SFP+ module in the widely supported MSA form factor, it installs quickly in compatible switches, routers, and servers, reducing downtime and simplifying capacity upgrades across multi-vendor networks.

Technical Details of StarTech.com Citrix EW3P0000558 Compatible SFP+ Module

• Data rate: 10GBASE-LR, delivering 10 Gbps Ethernet over long-range single-mode fiber environments.
• Wavelength (typical): 1310 nm, optimized for low attenuation and high signal integrity over SMF paths.
• Fiber type: Single-Mode Fiber (SMF), suitable for long-distance links and inter-data-center connections.
• Connector type: LC duplex optical interface, providing a compact, commonly used connector for fiber installations.
• Distance capability: Up to 10 kilometers (approx. 6.2 miles) as specified by the 10GBASE-LR standard for SMF links.
• Form factor: SFP+ hot-pluggable transceiver, designed for use in a wide range of switches, routers, and network adapters that support SFP+ modules.
• DDM support: Digital Diagnostics Monitoring for ongoing health and status checks of the transceiver in real time.
• Compatibility: Certified and configured for use with Citrix EW3P0000558 compatible systems and environments, ensuring predictable operation within enterprise networks.
• Operating conditions: Conforms to industry standards for optical transceivers, with typical operating temperature ranges suitable for data center deployments.

How to install StarTech.com Citrix EW3P0000558 Compatible SFP+ Module

• Prepare the device: Power down the switch, router, or server if required by your maintenance policy, or ensure a safe hot-swap window if your equipment supports it.
• Locate an empty SFP+ slot: Identify an available SFP+ uplink port on your networking device that supports hot-swapping and is compatible with SFP+ modules.
• Insert the module: Carefully align the module with the slot and gently push until it seats fully and the retention latch engages. Avoid excessive force to prevent damage to the connector.
• Connect the fiber cable: Attach an LC duplex fiber patch cord to the module’s LC connectors, ensuring correct polarity and clean, properly terminated fiber ends for optimal signal quality.
• Power on and verify: Restore power to the device (or acknowledge the hot-swap). Check the management interface or LED indicators to confirm link status. If available, enable and review DDM data to confirm optical power levels and temperature are within expected ranges.
• Test end-to-end connectivity: Run a basic data test or diagnostic to verify link establishment, latency, and throughput. If issues arise, consult device logs and the Citrix compatibility guidelines for troubleshooting steps.

Frequently asked questions

• Q: What is 10GBASE-LR? A: 10GBASE-LR is a 10 gigabit Ethernet standard designed for long-range single-mode fiber transmissions. It supports links up to about 10 kilometers, depending on fiber quality and connector integrity, making it ideal for connecting data centers and distant network segments.
• Q: Is this module compatible with Citrix equipment? A: Yes. The EW3P0000558 compatible SFP+ module is specifically designed to work with Citrix environments and configurations, helping to ensure interoperability and reliable performance when deploying Citrix workloads.
• Q: What is Digital Diagnostics Monitoring (DDM)? A: DDM provides real-time metrics such as optical power, temperature, voltages, currents, and other transceiver health data. This enables proactive monitoring, faster issue detection, and easier maintenance planning.
• Q: What fiber and connector are used? A: The module uses Single-Mode Fiber (SMF) with an LC duplex connector, a common choice for long-haul and data-center uplinks that require low loss and high signal integrity.
• Q: How do I install this SFP+ module? A: The installation involves placing the SFP+ module into an available SFP+ slot, connecting an LC duplex fiber cable, and verifying link status via the device’s management interface. It is designed to be plug-and-play and hot-swappable in compatible equipment.
• Q: What is the typical distance you can cover with this module? A: Up to 10 kilometers on standard SMF cabling, depending on the quality of the fiber and installation conditions.
• Q: Are there any maintenance tips for long-term reliability? A: Regularly monitor DDM readings, keep fiber connectors clean, and perform periodic firmware and compatibility checks with your data center devices to sustain optimal performance.