StarTech.com Citrix EW3Z0000586 Compatible SFP+ Module - 10GBASE-LR - 10GE SFP+ 10GbE Single Mode Fiber SMF Optic Transceiver - 10km DDM

Upgrade your network infrastructure with a high-performance 10 Gigabit Ethernet transceiver designed for reliability, flexibility, and seamless integration into enterprise, data center, and cloud environments. The StarTech.com Citrix EW3Z0000586 Compatible SFP+ Module delivers true 10GBASE-LR capability over single-mode fiber, enabling scalable, long-distance connections between switches, routers, servers, and storage devices. Built to meet the demands of modern networks, this SFP+ transceiver is compatible with Citrix deployments and a broad ecosystem of hardware vendors, ensuring smooth operation in virtualization, WAN aggregation, and core network topologies.

Engineered for long-range interconnects, the module leverages a 1310 nm laser to achieve distances up to 10 kilometers on SMF, making it an ideal choice for campus backbones, data center interconnects, and disaster recovery links. Its compact, hot-swappable design fits into standard SFP+ slots, minimizing downtime during maintenance windows and enabling agile upgrades without throwing your network into upheaval. With Digital Diagnostics Monitoring (DDM) built in, network administrators gain real-time visibility into critical operating parameters, allowing proactive management and rapid troubleshooting whenever issues arise.

Beyond raw speed, this transceiver is crafted for dependable interoperability. It adheres to the Small Form-factor Pluggable (SFP+) MSA and IEEE 802.3ae 10GBASE-LR standards, helping to ensure compatibility with a wide range of vendors and devices. Whether you’re deploying a multi-vendor data center, expanding a Citrix virtualization environment, or linking remote sites with ultra-low latency, the EW3Z0000586-compatible module provides a consistent, predictable 10GbE link with minimal configuration. In short, it’s a future-ready networking component that aligns with current IT needs while offering room to grow as your network evolves.

In practical terms, organizations rely on 10GBASE-LR modules to consolidate fiber infrastructure, simplify cabling schemes, and maximize the efficiency of backbone and distribution layers. The SMF optic with LC duplex connectors is designed for clean, high-bandwidth transmission, delivering stable links under typical operational conditions. The result is a scalable solution that supports demanding workloads such as virtualization, big data analytics, streaming media, and high-speed data replication—without compromising compatibility or performance.

• 10GBASE-LR SFP+ transceiver delivers 10 Gigabit Ethernet over single-mode fiber, enabling high-capacity uplinks and interconnects across data centers, campuses, and enterprise networks.
• Long-range communication up to 10 kilometers with a 1310 nm laser, ideal for mid-to-core network links between core switches, edge devices, and storage arrays.
• DDM support provides real-time monitoring of optical power, temperature, and other critical parameters, simplifying maintenance and accelerating issue resolution.
• Plug-and-play SFP+ form factor with LC duplex connectors ensures broad compatibility and minimal downtime during upgrades or replacements.
• Citrix EW3Z0000586 compatibility and StarTech reliability guarantee seamless interoperability in Citrix deployments and across an extensive ecosystem of switches and servers.

Technical Details of StarTech.com Citrix EW3Z0000586 Compatible SFP+ Module

• Module type: 10GBASE-LR SFP+ transceiver
• Fiber type: Single-mode fiber (SMF)
• Wavelength: 1310 nm
• Distance: Up to 10 kilometers
• Connector: LC duplex
• Data rate: 10 Gbps Ethernet
• Standards compliance: IEEE 802.3ae, SFP+ MSA compliant
• Diagnostics: Digital Diagnostics Monitoring (DDM) supported
• Hot-swappable: Yes
• Operating temperature range: Standard commercial range (typical for data center environments)
• Compatibility note: Designed for broad switch compatibility; verify with your vendor for firmware-specific support
• Power considerations: Low power consumption appropriate for dense deployments

How to install StarTech.com Citrix EW3Z0000586 Compatible SFP+ Module

• Power down the networking device (switch, router, or server) before installation to prevent damage.
• Identify an available SFP+ slot and align the module with the connector on the device; insert firmly until it clicks into place.
• Connect a single-mode fiber optic cable with LC duplex connectors to the module, ensuring proper polarity and secure routing to minimize stress on the cable.
• Connect the other end of the fiber to a compatible SFP+ port on a partner device, ensuring the link partner supports 10GBASE-LR and SMF at the specified distance.
• Power on the device and verify link status in the management interface. Use DDM readings to confirm optical power levels and temperature are within expected ranges; perform a basic throughput test to confirm 10GbE performance.

Frequently asked questions

• Q: What is 10GBASE-LR? A: 10GBASE-LR is a 10 Gigabit Ethernet standard that uses long-range single-mode fiber to cover distances up to about 10 km, ideal for backbone links and inter-switch connections.
• Q: Is this module compatible with my switch or router? A: The module is designed to be broadly compatible with SFP+ ports and adheres to MSA standards. However, compatibility can vary by vendor, firmware, and hardware revision. Always confirm with your network device vendor for guaranteed support in your exact model and firmware version.
• Q: Does it support Digital Diagnostics Monitoring (DDM)? A: Yes. DDM provides real-time visibility into optical power, temperature, supply voltage, and other health metrics to simplify management and fault isolation.
• Q: Can I use this module with multi-mode fiber? A: No. 10GBASE-LR is designed for single-mode fiber. For multi-mode fiber, you would need a different module such as 10GBASE-SR or similar that matches your fiber type and distance requirements.
• Q: What is the maximum distance this module can cover? A: Up to 10 kilometers when used with single-mode fiber and the appropriate transceiver specifications (1310 nm wavelength, 10GBASE-LR).
• Q: How do I verify compatibility in a Citrix environment? A: Begin by confirming that your Citrix deployment’s network gear (switches, load balancers, SAN bridges) supports 10GBASE-LR SFP+ modules and that the device firmware recognizes the module. Citrix deployments typically rely on reliable, high-speed connectivity for virtualization, storage replication, and traffic consolidation; this module is designed to support those needs when paired with compatible hardware.