StarTech.com Dell EMC SFP-10G-BX10-D Compatible SFP+ Module – 10GBASE-BX-D BiDi Fiber (SMF)

Indulge in enterprise‑grade 10 Gigabit Ethernet connectivity with the StarTech.com Dell EMC SFP-10G-BX10-D Compatible SFP+ Module. This downstream SFP+ transceiver is engineered to be a precise, plug‑and‑play match for Dell EMC switches and routers that require the 10GBASE‑BX10‑D BiDi fiber standard. Designed, programmed, and tested to ensure seamless interoperability, this module fits into standard SFP+ slots to deliver reliable, scalable performance for data centers, campuses, and high‑bandwidth networks. Whether you’re upgrading an old link or expanding a new one, this StarTech.com SFP+ module provides a compact, cost‑effective solution for delivering 10 Gbps over single‑mode fiber with minimal downtime.

• Dell EMC compatibility and testing: Verified to work with 10GBase‑BX10‑D capable Dell EMC switches and routers, ensuring dependable performance and simplified deployment in mixed vendor environments.
• 10GBASE‑BX10‑D BiDi performance: Bi-Directional (BiDi) design enables high‑density fiber deployments by carrying Tx and Rx signals on opposite wavelengths over a single fiber strand, reducing fiber count and installation complexity.
• SMF single‑mode fiber support: Optimized for long‑haul and campus networks, delivering robust, high‑bandwidth connectivity over single‑mode fiber links with low attenuation and excellent signal integrity.
• Plug‑and‑play SFP+ form factor: Hot‑swappable SFP+ transceiver that drops into standard SFP+ ports without special configuration, minimizing downtime and enabling rapid network upgrades.
• Partner compatibility and reliability: Pairs seamlessly with StarTech.com’s SFP10GBX10US module for test and verification, offering a trusted path for end‑to‑end 10 Gigabit links across Dell EMC and StarTech ecosystems.

Technical Details of StarTech.com Dell EMC SFP-10G-BX10-D Compatible SFP+ Module

The SFP10GBX10DS is a Dell EMC SFP‑10G‑BX10‑D compatible downstream fiber SFP transceiver. It is designed to deliver 10 Gigabit Ethernet over single‑mode fiber using a BiDi configuration, enabling efficient network scaling with fewer fibers. This module is engineered, programmed, and tested to ensure compatibility with 10GBase‑BX10 compatible Dell EMC switches and routers. It is a high‑quality component intended for enterprise networks, data centers, and edge deployments where reliable, high‑speed fiber connectivity is essential. The module is compatible with StarTech.com’s own SFP10GBX10US partner, enabling straightforward verification and testing in mixed environments. While the precise distance supported by Dell EMC hardware will depend on the fiber type, connectors, and link budget, this module is built to meet the stringent requirements of modern 10G networks while maintaining robust performance and interoperability.

• Product type: SFP+ transceiver module designed for 10 Gigabit Ethernet (10GbE).
• Standard: 10GBASE‑BX10‑D BiDi fiber standard, enabling downstream BiDi signaling.
• Fiber type: Single‑mode fiber (SMF) compatible, optimized for long‑distance links.
• Wavelength and signaling: BiDi signaling enables Tx/Rx on separate wavelengths over a single fiber strand, reducing fiber count and complexity (exact wavelengths align with the BX10‑D specification).
• Interface/form factor: SFP+ plug‑in module designed for hot‑swappable installation in standard SFP+ ports.
• Compatibility: Specifically designed to be compatible with Dell EMC BX10‑D capable devices and tested with StarTech.com’s SFP10GBX10US partner module for end‑to‑end validation.
• Performance emphasis: Engineered for reliable 10 Gbps throughput with robust error handling, suitable for data centers, campus backbones, and enterprise networks requiring high bandwidth.

In addition to its technical capabilities, this StarTech.com SFP+ module emphasizes operational reliability and longevity. The device is built to endure typical data center conditions, with emphasis on stable optical performance, solid digital diagnostics, and compatibility across a broad range of Dell EMC gear. The BiDi approach helps conserve fiber infrastructure, which can translate into cost savings and easier maintenance for networks with limited fiber availability or space constraints. By leveraging a dedicated downstream path in BX10‑D configurations, network operators can achieve cleaner, more scalable topologies without compromising performance or compatibility.

how to install StarTech.com Dell EMC SFP-10G-BX10-D Compatible SFP+ Module

• Power down the Dell EMC switch or router port (or confirm that the port supports hot‑swap) before installation, to minimize the risk of misalignment and ensure clean insertion of the SFP+ module.
• Verify that the target port is an SFP+ slot and that the device supports 10GBASE‑BX10‑D BiDi transceivers. Confirm firmware compatibility if required by your network hardware.
• Remove the existing transceiver or cover from the SFP+ slot by gently lifting the retaining clip and sliding the module straight out.
• Orient the StarTech.com SFP10GBX10DS so that the correct edge faces the port and slide it firmly into the slot until it seats with a click and is fully engaged.
• Connect the appropriate single‑mode fiber cable to the transceiver, ensuring the proper polarity and, if applicable, correct fiber type. Secure any cable management or strain relief as required in your environment.
• Power on the device (or re‑enable the port) and verify link status. Use the device’s management interface or CLI to confirm 10G link establishment and to check the transceiver’s operational state and diagnostic counters.
• Run a basic throughput test or data transfer to confirm stable performance and verify that the BX10‑D BiDi signaling is functioning as expected on the link.

Frequently asked questions

• Q: What is the primary benefit of using a BX10‑D BiDi SFP+ module? A: BX10‑D BiDi transceivers reduce fiber count by transmitting two directions over a single fiber strand with different wavelengths. This can simplify cable infrastructure, lower deployment costs, and improve cable management in dense data center environments.
• Q: Is this StarTech.com module compatible with Dell EMC BX10 gear? A: Yes. The SFP10GBX10DS is designed to be Dell EMC BX10‑D compatible and is tested to work with Dell EMC switches and routers that require this specification.
• Q: Can I use this module with StarTech.com SFP10GBX10US for testing? A: The module is designed to pair with StarTech.com’s SFP10GBX10US module for end‑to‑end verification, providing a reliable testing path before deployment in live networks.
• Q: What type of fiber should I use with this transceiver? A: This module is optimized for single‑mode fiber (SMF). Use appropriate SMF cables labeled for 10GBASE‑BX10‑D operation to achieve the best performance and reach.
• Q: Do I need special firmware or drivers to operate this transceiver? A: In most enterprise deployments, the transceiver operates in a plug‑and‑play manner within compatible Dell EMC devices. Depending on your hardware, occasional firmware updates may be recommended to ensure the best interoperability.