Startech.com Dell EMC SFP-10G-LRM Compatible SFP+ 10G

Experience enterprise-grade reliability with a transceiver that blends StarTech.com engineering excellence and Dell EMC compatibility. The Dell EMC SFP-10G-LRM compatible SFP+ 10G module delivers robust, high-speed connectivity for data centers, server rooms, and network backbones. Built to meet the demands of 10 Gigabit Ethernet deployments, this SFP+ transceiver supports long-reach multimode fiber (LRM) while maintaining compatibility with a wide range of Dell EMC devices, switches, and network interfaces. Whether you’re upgrading a growing storage environment, expanding a virtualization cluster, or enhancing a campus core, this module is designed to maximize performance, simplify deployment, and reduce total cost of ownership by leveraging familiar Dell EMC hardware ecosystems.

• 10GBASE-LRM compatibility — This SFP+ transceiver delivers true 10 gigabit Ethernet performance using the Long Reach Multimode (LRM) standard. It is engineered to work with 1310 nm signaling and is optimized for reliable links over legacy multimode fiber, enabling high-speed connections without immediate cabling upgrades.
• Dell EMC compatibility — Specifically tested and qualified to pair with Dell EMC SFP-10G-LRM capable devices. Expect seamless plug-and-play operation with Dell EMC switches, servers, and storage solutions, reducing the risk of interoperability issues and expedited deployment in mixed-vendor environments.
• LRM over multimode fiber — The transceiver is designed to operate over multimode fiber using Long Reach Multimode optics, allowing links up to extended distances on appropriate MMF cabling. This makes it an economical choice for data centers with existing multimode infrastructure seeking to extend coverage without replacing fiber cabling.
• MSA-compliant, hot-swappable — Built to the SFP+ MSA standard, it slides into standard SFP+ slots with a secure, hot-swappable design. This minimizes downtime during upgrades and replacements, enabling rapid deployment in live network environments without powering down adjacent equipment.
• Low power, robust reliability — Engineered for efficient power consumption and dependable operation in demanding data-center conditions. The module adheres to RoHS compliance and is backed by StarTech.com’s warranty and support, helping IT teams keep critical services online and performing at peak levels.

Technical Details of Startech.com Dell EMC SFP-10G-LRM Compatible SFP+ 10G

• Form Factor: SFP+ transceiver module
• Data Rate: 10 Gbps
• Transceiver Type: 10GBASE-LRM
• Wavelength: 1310 nm
• Fiber Type: Multimode fiber with Long Reach (LRM)
• Distance: Up to 300 meters on suitable MMF (subject to fiber type and installation constraints)
• Connector: LC duplex
• MSA Compliance: SFP+ MSA compliant
• Compatibility: Dell EMC SFP-10G-LRM compatible devices; works with StarTech.com network gear
• Power Consumption: Typically 0.5–1.0 W depending on workload and signaling
• Operating Temperature: 0°C to 70°C (commercial grade; typical for data-center environments)
• RoHS: Compliant
• Warranty: StarTech.com limited warranty and support

How to install Startech.com Dell EMC SFP-10G-LRM Compatible SFP+ 10G

• 1) Power down the host device and disconnect any connected power sources to ensure a safe installation environment.
• 2) Locate an available SFP+ slot in your switch, router, or NIC and verify that the slot is labeled for 10G SFP+ with compatibility for SFP-Plus modules.
• 3) Align the transceiver with the connector in the slot and firmly push until you hear a subtle click, indicating that the module is seated correctly. Do not force the module beyond its seating position.
• 4) Connect your multimode fiber cable (LC duplex) to the transceiver’s LC connectors, ensuring the correct pairing and orientation for your link. Avoid excessive bending or stressing of the fiber at the connections.
• 5) Reconnect power and boot the device. Access the management interface and verify that the SFP+ module is recognized with a 10G link status active, then configure the interface as needed for your network design.
• 6) If your environment uses link aggregation or VLAN tagging, apply the appropriate configuration to ensure interoperability with existing 10G links and storage networks.
• 7) Run a basic throughput test or utilize your network monitoring tools to confirm the expected 10 Gbps performance and monitor for any rate fluctuations or error counters.
• 8) Document the installation, including fiber type, link distance, device model, and port assignments, to simplify future maintenance and troubleshooting.

Frequently asked questions

• Q: Is this transceiver compatible with all Dell EMC devices?
  A: It is designed and tested for Dell EMC SFP-10G-LRM capable devices. While it should work with many Dell EMC switches, servers, and storage controllers that support SFP+ 10G-LRM, always verify specific model compatibility with your hardware documentation to ensure optimal performance.
• Q: What kind of fiber is required?
  A: This module uses 1310 nm signaling over multimode fiber configured for Long Reach Multimode (LRM). Use appropriate MMF cabling (e.g., OM1/OM2/OM3 types that support LRM) with LC connectors and avoid excessive bending and environmental stress on the fiber run.
• Q: Can I hot-swap this module?
  A: Yes. The transceiver is designed to be hot-swappable, allowing you to replace or upgrade without powering down the entire system in most data-center scenarios. Always follow your equipment vendor’s maintenance procedures when hot-swapping.
• Q: Does this include warranty?
  A: Yes. StarTech.com provides a limited warranty and support. For detailed warranty terms, refer to the product documentation and warranty policy provided at the time of purchase.
• Q: Will this work at full 10G speed with Dell EMC networking gear?
  A: When paired with Dell EMC SFP-10G-LRM capable devices and properly configured, the module supports full 10G operation. Performance also depends on the connected fiber, network topology, and device configuration.