StarTech.com Dell EMC SFP-10G-SR Compatible SFP+ Module – 10GBASE-SR MMF Transceiver (400 m) with DDM

The StarTech.com Dell EMC SFP-10G-SR Compatible SFP+ Module is engineered to deliver high-performance, reliable 10 Gigabit Ethernet connectivity in data centers, server rooms, and enterprise networks. Designed for seamless compatibility with Dell EMC switches and routers, this 10GBASE-SR transceiver offers plug-and-play installation, robust build quality, and trusted StarTech reliability. If you’re upgrading existing 10GbE links or deploying new short-reach fiber connections, this SFP+ optic brings dependable speed over multimode fiber (MMF) with the simplicity of a standard SFP+ module. With its Digital Diagnostic Monitoring (DDM) support, administrators gain real-time visibility into link health, temperature and optical power, enabling proactive maintenance and quick issue resolution. Intended for short-range MMF deployments, the 850 nm VCSEL transmitter and LC duplex interface are optimized for OM3 and OM4 fiber, letting you reach up to 400 meters while maintaining clean signal integrity and low bit-error rates. This StarTech solution is built to integrate seamlessly with Dell EMC ecosystems, ensuring compatibility with a wide range of Dell switches and routers without the need for expensive OEM modules. The result is a cost-effective, reliable, and scalable path to 10 Gigabit networking that helps you maximize data throughput, minimize downtime, and simplify network management.

• High-speed 10GBASE-SR transceiver delivering 10 Gbps full-duplex Ethernet over multimode fiber, ideal for campus deployments, server-to-server links, and storage networks where fast, reliable short-range connectivity is essential.
• MMF compatibility up to 400 meters on OM3/OM4 fiber, enabling flexible toplogies in data centers and enterprise networks while preserving signal integrity across moderate distances.
• 850 nm VCSEL transmitter designed for short-range multimode fiber applications, providing efficient power usage and stable, consistent performance across supported Dell EMC devices.
• LC duplex connector for easy integration with standard fiber cabling, ensuring a snug fit in compact SFP+ ports and minimizing installation complexity.
• Digital Diagnostic Monitoring (DDM) support for real-time insight into optical transmit power, receive power, temperature, and TX bias, enabling proactive maintenance and rapid fault isolation.

Technical Details of StarTech.com Dell EMC SFP-10G-SR Compatible SFP+ Module

• Form factor: SFP+ transceiver module
• Optical compatibility: 10GBASE-SR (IEEE 802.3ae) standard
• Wavelength: 850 nm
• Fiber type: Multimode (MMF) – suitable for OM3/OM4 fiber
• Reach: Up to 400 meters on appropriate MMF cabling
• Connector: LC duplex
• DDM: Digital Diagnostic Monitoring supported for monitoring optical parameters
• Compatibility: Dell EMC switches and routers (plug-and-play with Dell EMC environments)
• Power consumption: designed for efficient operation with standard SFP+ power profiles
• Quality and compliance: StarTech reliability with MS A-grade design and manufacturing standards

How to install StarTech.com Dell EMC SFP-10G-SR Compatible SFP+ Module

• Power down the server or networking device and the connected equipment if required by your policy, to reduce the risk of ESD damage during installation.
• Remove the existing SFP+ transceiver if present, ensuring the slot is clean and free of debris before inserting the new module.
• Align the StarTech SFP+ module with the SFP+ slot in the Dell EMC switch or router, then gently push straight in until it is firmly seated and the locking tab engages.
• Connect the LC duplex multimode fiber patch cable to the transceiver’s LC connectors, ensuring the fiber is clean and properly terminated with OM3/OM4 fiber for optimal performance.
• Lightly verify the optical links, then power on the device and monitor the link status indicators. Use the device’s management interface to confirm the transceiver is recognized and operating at 10G.
• If your network supports DDM, review the diagnostic data to confirm stable TX/RX power, temperature, and other vital parameters. Address any anomalies per your network maintenance procedures.

Frequently Asked Questions

• Q: What is the StarTech.com Dell EMC SFP-10G-SR Compatible SFP+ Module used for?
  A: It’s designed to provide high-speed 10 Gigabit Ethernet connectivity over multimode fiber for short-range links, typically within data centers or campus networks, and is specifically compatible with Dell EMC devices.
• Q: What fiber type and distance can I expect with this module?
  A: The module uses multimode fiber (MMF), typically OM3/OM4, and supports up to 400 meters of reach, depending on fiber quality and network design.
• Q: Does this transceiver support Digital Diagnostic Monitoring (DDM)?
  A: Yes, the module includes DDM support, providing real-time data on optical power levels, temperature, and other operating conditions for proactive network management.
• Q: Is this a plug-and-play replacement for Dell EMC devices?
  A: Yes, it is designed for seamless compatibility with Dell EMC switches and routers, enabling quick installation and straightforward integration with existing 10GBASE-SR networks.
• Q: How do I know if this transceiver will work in my environment?
  A: The module follows standard SFP+ specifications and Dell EMC compatibility guidelines. For best results, confirm the device supports 10GBASE-SR, MMF, and LC duplex connectors, and that your firmware is up to date.