StarTech.com Dell EMC SFP-10G-ZR Compatible SFP+ Module

Elevate your data center and backbone networks with the StarTech.com Dell EMC SFP-10G-ZR Compatible SFP+ Module. Designed to deliver dependable 10 Gigabit Ethernet over long-haul single-mode fiber, this 10GBASE-ZR transceiver is engineered to work seamlessly with Dell EMC brand switches and routers. It’s a plug-and-play upgrade that minimizes downtime while maximizing uptime, enabling organizations to scale their connectivity from campus to metro distances with confidence. The module supports distances up to 80 kilometers on standard SMF, enabling robust inter-data center links, disaster recovery paths, and remote site connectivity without sacrificing performance. Beyond raw throughput, it features Digital Diagnostics Monitoring (DDM) for real-time visibility into critical operating parameters, empowering proactive maintenance and capacity planning. Whether you’re refreshing an aging interface, expanding a storage network, or building a future-proof architecture, this SFP+ transceiver blends reliability, compatibility, and long-range capabilities into a single, cost-effective solution.

• Compatibility and reliability: This SFP+ module is Dell EMC SFP-10G-ZR compatible, meaning it has been designed, programmed and tested to work with Dell EMC brand switches and routers. Its plug-and-play fit minimizes configuration headaches, ensuring a smooth, rapid deployment across mixed-vendor environments and reducing the risk of mismatched firmware or compatibility issues.
• High-performance 10GbE over SMF: Supporting 10GBASE-ZR, the module delivers true 10 Gigabit Ethernet over single-mode fiber. The 1310 nm operating window is optimized for long-haul links, offering strong signal integrity and low attenuation over extended distances—perfect for data center interconnects, campus networks, and metro deployments requiring reliable, high-speed connectivity.
• Digital Diagnostics Monitoring (DDM): Built-in DDM provides real-time visibility into essential optical parameters, including optical power, temperature, and laser bias current. This enables proactive health checks, quicker fault isolation, and smarter capacity planning so you can optimize link budgets and plan upgrades with confidence.
• Robust enterprise-grade design: Crafted for 24/7 operation in demanding environments, the SFP+ module adheres to strict industry standards for reliability. It supports hot-swapping in SFP+ ports, allowing maintenance and upgrades with minimal disruption. Its compatibility and tested performance help ensure stable operation in multi-vendor ecosystems and mission-critical networks.
• Easy installation and broad applicability: As a standard SFP+ transceiver, it delivers straightforward installation into any compatible SFP+ port without the need for specialized tools or adapters. It’s well-suited for data centers, large enterprise campuses, telecom backbones, and storage networks that demand consistent, scalable 10GbE links over long fiber runs.

Technical Details of StarTech.com Dell EMC SFP-10G-ZR Compatible SFP+ Module

• Model: SFP10GZREMST
• Product type: SFP+ transceiver
• Standard: 10GBASE-ZR
• Interface speed: 10 Gbps
• Wavelength: 1310 nm
• Fiber type: Single-mode fiber (SMF)
• Max distance: Up to 80 km
• Diagnostics: Digital Diagnostics Monitoring (DDM)
• Form factor: SFP+ (hot-swappable)
• Compatibility: Dell EMC SFP-10G-ZR compatible; designed, programmed and tested for Dell EMC devices
• Manufacturer: StarTech.com
• Part number: SFP10GZREMST

how to install StarTech.com Dell EMC SFP-10G-ZR Compatible SFP+ Module

• Power down the equipment as recommended by your network policy, and disconnect any active fiber or electrical connections to avoid static damage or misalignment.
• Identify the correct SFP+ slot on the Dell EMC switch or router and prepare the device for a hot-swap if the policy allows; ensure cooling and ventilation are adequate so the equipment remains within safe operating temperatures.
• Carefully align the StarTech.com SFP+ module with the slot and insert it firmly until it seats and, if present, the locking mechanism engages securely.
• Connect the single-mode fiber optic cable to the transceiver according to your network design and polarity requirements; verify that the fiber is clean and free of dust or damage before insertion.
• Power on the device and check the link status via the management console, port LEDs, or your network monitoring system. Confirm that the 10GbE link is established and that traffic can be transmitted and received without errors.
• Optionally run a basic connectivity test (pings, throughput tests, or any vendor-specific diagnostic tools) to verify end-to-end performance; monitor DDM readouts if available to ensure optical power and temperature readings are within expected ranges.

Frequently asked questions

• Q: What is the maximum reach of this transceiver? A: The StarTech.com Dell EMC SFP-10G-ZR Compatible SFP+ Module supports up to 80 kilometers on single-mode fiber with 10GBASE-ZR configurations, enabling long-haul link deployments between data centers or remote sites.
• Q: Is this module guaranteed to work with Dell EMC devices? A: Yes. The module is designed, programmed, and tested to be compatible with Dell EMC switches and routers that support 10GBASE-ZR SFP+ modules, providing a reliable, plug-and-play upgrade or replacement option.
• Q: Does the module provide real-time health monitoring? A: Yes. It includes Digital Diagnostics Monitoring (DDM) to monitor critical parameters such as optical power, temperature, and other module health indicators.
• Q: Can I replace an existing Dell EMC SFP-10G-ZR with this StarTech module without downtime? A: In most cases, yes. The module is designed for hot-swapping in standard SFP+ slots, which allows for maintenance or upgrades with minimal downtime, subject to your device's policy on service windows.
• Q: What type of fiber does it require? A: The module is a single-mode fiber (SMF) transceiver intended for use with 10GBASE-ZR deployments; ensure you select the correct fiber type and connectors per your network design.
• Q: Is additional configuration required after installation? A: In many environments, it operates as a plug-and-play module. Depending on your network, you may need to verify link authentication, VLAN settings, or throughput policies in your switch’s management interface.