StarTech.com Dual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter - PoE/PSE

The StarTech.com Dual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter - PoE/PSE is a cutting-edge solution for enhancing your network infrastructure. This adapter not only provides high-speed connectivity through its dual 10/100/1000 Mbps ports but also integrates Power over Ethernet (PoE) functionality. With this innovative design, you can reduce clutter and simplify installations, especially in remote locations where power sources may be scarce.

• Dual 10/100/1000 Mbps PoE RJ45 Ports: Experience lightning-fast network speeds along with the convenience of Power over Ethernet. The ST2000PEXPSE adapter features two RJ45 ports that deliver data and up to 25.5W of power each, making it perfect for connecting IP cameras, wireless access points, and other powered devices.
• Power Sourcing Equipment (PSE) Design: Compliant with the IEEE 802.3at (Type 1 and 2) standard, this adapter acts as a Power Sourcing Equipment device, allowing it to deliver 48V DC power to compliant Powered Devices (PD) without the need for additional power cables.
• Versatile Compatibility: The ST2000PEXPSE is suitable for any PCI Express-enabled client, server, or workstation. Its full and low profile design ensures compatibility with a wide range of systems, making it a versatile choice for various installations.
• Enhanced Networking Features: The adapter supports advanced networking features such as Jumbo Frames, VLAN tagging, and Wake on LAN (WOL), allowing for efficient data transmission and management across your network.
• Easy Installation & Protection: Installation is straightforward with included full and low profile/half-height installation brackets. Additionally, the unique surge protection design helps prevent damage to your system from potential lightning strikes, ensuring reliable operation.

Technical Details of Product

• Dual 10/100/1000 Mbps PoE RJ45 ports
• Power Sourcing Equipment (PSE) design compliant with IEEE 802.3at (Type 1, 2)
• Delivers up to 25.5W of power on each port
• On-chip 48 KB Big Transmit/Receive Buffer Support
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab standards
• Supports IEEE 802.1Q VLAN tagging and IEEE 802.1P Layer 2 Priority Encoding
• Includes built-in SATA and LP4 Molex power connectors
• Crossover Detection & Auto-Correction (Auto MDIX)
• Backed by a 2-year warranty and free lifetime technical support from StarTech.com

How to Install

Installing the StarTech.com Dual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter is a simple process:

1. Power off your computer and disconnect it from the power source.
2. Open the computer case, ensuring you follow the manufacturer's instructions.
3. Locate an available PCI Express slot on the motherboard.
4. Carefully insert the PCIe adapter into the slot and secure it with screws if necessary.
5. Connect the power cables (SATA or LP4 Molex) to the adapter as required for PoE functionality.
6. Close the computer case and reconnect the power source.
7. Power on your computer, and install any necessary drivers as prompted by your operating system.

Frequently Asked Questions

• What is Power over Ethernet (PoE)?
  Power over Ethernet (PoE) allows network cables to carry electrical power along with data, eliminating the need for separate power sources and reducing cable clutter.
• Can I use the adapter in a server environment?
  Absolutely! The ST2000PEXPSE is designed to support server and workstation use, providing reliable connectivity and power for various networked devices.
• Does the adapter support Jumbo Frames?
  Yes, the StarTech.com Dual Port PCI Express Gigabit Ethernet adapter supports Jumbo Frames, allowing for larger network packets for efficient data transfer.
• Is technical support available for this product?
  Yes, StarTech.com offers free lifetime technical support for the ST2000PEXPSE adapter, ensuring you receive assistance whenever needed.
• What devices are compatible with the PoE function?
  The PoE function is compatible with any Powered Device (PD) that adheres to the IEEE 802.3at standard, such as IP cameras, wireless access points, and VoIP phones.