StarTech.com Extreme Networks 10302 Compatible SFP+ Module – 10GBASE-LR (10GbE, SMF, DDM)

Powerful, flexible, and built to endure demanding 10 Gigabit Ethernet deployments, this StarTech.com Extreme Networks 10302 compatible SFP+ module delivers dependable long-distance connectivity for 10GBASE-LR networks. Engineered to meet the rigors of data centers and enterprise environments, it combines precise 1310 nm laser optics with a compact SFP+ footprint to provide robust single-mode fiber (SMF) transmission up to 10 kilometers. Whether upgrading an existing Extreme Networks 10302 platform or building a new 10G network, this transceiver offers plug-and-play readiness, advanced diagnostics, and reliable performance that network engineers trust.

• High-performance 10GBASE-LR SFP+ transceiver: Designed for 10 Gigabit Ethernet links, this module supports flat, low-latency data transfer with consistent frame integrity across long distances, making it ideal for data center interconnects, campus networks, and core backbone links.
• Long-range SMF transmission up to 10 km: Engineered for long-haul connections, the 1310 nm laser enables stable, interference-resistant communication over standard single-mode fiber, reducing the need for repeaters and lowering overall network cost.
• Digital Diagnostics Monitoring (DDM) compatible: Built-in DDM support provides real-time insight into optical power, temperature, laser bias current, and other critical operating parameters, helping technicians monitor health and optimize uptime.
• Broad compatibility and practical reliability: Optimized for use with Extreme Networks devices and StarTech.com SFP+ ecosystems, this transceiver blends seamlessly with existing 10G infrastructure while preserving plug-and-play simplicity and hot-swappable operation.
• Durable, future-proof design: Compact SFP+ form factor, RoHS-compliant components, and rigorous testing ensure stable performance in varied environments—from racks to telecom cabinets—while offering scalable readiness for growing bandwidth demands.

Technical Details of StarTech.com Extreme Networks 10302 Compatible SFP+ Module

• Transceiver type: SFP+ 10GBASE-LR optical transceiver
• Fiber type: Single-mode fiber (SMF)
• Wavelength: 1310 nm
• Data rate: 10 Gbps
• Connector: LC duplex
• Distance capability: Up to 10 km
• DDM (Digital Diagnostics Monitoring): Yes, supports real-time diagnostics
• Form factor: SFP+ hot-swappable module
• Compatibility: Compatible with StarTech.com modules and Extreme Networks 10302 series where 10GBASE-LR SFP+ is supported
• Operating conditions: Designed to perform in standard data center environments with reliable ESD protection and robust mechanical tolerance

how to install StarTech.com Extreme Networks 10302 Compatible SFP+ Module

Installing this SFP+ module is straightforward and mirrors standard hot-plug procedures for 10G interfaces. Follow these steps to ensure a proper, reliable connection:

• Power down or ensure the host system is in a safe state before handling the module. If your devices support hot-swapping, you may proceed without powering down, but always observe electrostatic discharge precautions.

• Identify the appropriate SFP+ port on the Extreme Networks device or compatible switch where 10GBASE-LR connectivity is required. Verify that the port supports SFP+ transceivers and that the link partner is compatible with LR optics.

• Remove the existing SFP+ module (if present) by carefully unlocking the module latch and sliding it out. Avoid touching the optical connectors and keep the environment clean to prevent contamination.

• Insert the StarTech.com 10302-compatible SFP+ module into the SFP+ cage with the connector facing inward. Push gently until the module seats securely and the locking tab engages.

• Attach the single-mode fiber cable to the LC duplex connector, ensuring the correct polarity (TX to RX) and minimal bend radius to preserve signal integrity. After installation, power up the device or re-enable the port if it was disabled during installation.

• Configure the port as 10GBASE-LR if required by your network operating system, and verify link status. Use the device’s management interface to monitor optics status, including DDM readings if supported by the transceiver.

• Perform a basic throughput test and verify latency, jitter, and packet loss to confirm a healthy link. If issues arise, check fiber cleanliness, connector integrity, and alignment, along with any firmware or driver compatibility considerations.

Frequently asked questions

• Q: Is this module compatible with Extreme Networks 10302 devices?

  A: Yes. The StarTech.com Extreme Networks 10302 Compatible SFP+ Module is designed to fit 10GBASE-LR requirements and is compatible with Extreme Networks deployments that support LR SFP+ optics, providing seamless long-range 10 GbE connectivity when used in appropriate ports.

• Q: What type of fiber and connectors does it use?

  A: It uses single-mode fiber (SMF) with an LC duplex connector, tuned for long-distance 1310 nm operation and optimized for LR performance over SMF links.

• Q: What is the maximum transmission distance?

  A: Up to 10 kilometers on compatible SMF networks, enabling extended links between data centers, campus networks, and backbone connections without repeaters.

• Q: Does it support Digital Diagnostics Monitoring (DDM)?

  A: Yes. DDM provides real-time monitoring of critical optical parameters such as optical power, temperature, and laser bias current, helping you manage link health and performance proactively.

• Q: Is installation plug-and-play, or are drivers required?

  A: This is a hot-swappable, plug-and-play transceiver designed to work with compatible 10GBASE-LR ports without requiring special drivers. Some network devices may require enabling the port or updating firmware to recognize third-party LR transceivers.

• Q: Are cables or accessories included with the module?

  A: Typically, only the transceiver module is included. Fiber patch cables and any mounting hardware are typically purchased separately according to your network’s needs. Always verify with your supplier for exact contents.