StarTech.com HPE AJ717A Compatible SFP+ Module — 8G Fiber Channel / 8GbE Single-Mode SFP+ Transceiver

Engineered for high-demand data centers and enterprise networks, the StarTech.com HPE AJ717A Compatible SFP+ Module is a precision-built transceiver designed to deliver dependable 8Gb Fibre Channel connectivity while supporting 8Gb Ethernet over single-mode fiber. This SFP+ module is specifically engineered, tested, and validated to work with HP/HPE switches and routers that require AJ717A compatibility, ensuring seamless interoperability in mixed-vendor environments. With a focus on reliability, long-reach performance, and straightforward deployment, this transceiver is the ideal upgrade for storage-area networks, high-speed backbone links, and core-to-access connections. Whether you’re consolidating storage fabrics, migrating to higher bandwidth, or refreshing aging optics, the AJ717A-compatible StarTech module brings enterprise-grade stability and consistent throughput to your network infrastructure.

• Designed for HPE AJ717A-compatible devices: Meticulously engineered, tested, and cataloged to work with HP/HPE switches and routers that rely on the AJ717A standard, delivering dependable compatibility across your existing network gear.
• 8Gbps Fibre Channel and 8GbE capability: The SFP+ transceiver supports high-speed Fibre Channel data paths and preserves 8Gb Ethernet performance over the same compact module, enabling flexible use for SAN traffic, server-to-storage links, and data-heavy workloads.
• Long-distance single-mode fiber reach up to 10 kilometers: Built for SMF cabling, this transceiver enables distant data-center interconnects and campus-wide links with minimal signal degradation, improving scalability while reducing the need for repeaters or multiple hops.
• Plug-and-play, hot-swappable design: The transceiver is engineered for quick installation with zero configuration in most environments, allowing rapid upgrades with minimal downtime and no complex driver setups or compatibility checks beyond standard device firmware.
• Quality you can trust from StarTech: As a long-standing provider of OEM-grade network equipment, StarTech delivers thorough compatibility testing, solid build quality, and reliable performance to support mission-critical workloads and data-center efficiency.

Technical Details of StarTech.com HPE AJ717A Compatible SFP+ Module

• Brand: StarTech.com
• Model/Compatibility: HPE AJ717A-compatible SFP+ module designed for HP/HPE devices
• Form Factor: SFP+
• Interfaces: SFP+ transceiver supporting Fibre Channel and Ethernet applications
• Data Rate: 8 Gbps Fibre Channel and 8 Gbps Ethernet capability via SFP+ interface
• Fiber Type: Single-Mode Fiber (SMF)
• Maximum Distance: Up to 10 kilometers (distance may vary with fiber, connectors, and link budget)
• Operating Environment: Designed for standard data-center environmental conditions typical of enterprise equipment

How to Install StarTech.com HPE AJ717A Compatible SFP+ Module

• Power down equipment or ensure slot supports hot-swapping: If your device supports hot-swapping, you may proceed without powering down; otherwise, safely power down the chassis and disconnect power before installation.
• Insert the SFP+ module into an available slot: Align the module with the SFP+ cage and press firmly until it is fully seated and the retention mechanism engages.
• Connect the single-mode fiber patch cable: Attach the LC connectors to the transceiver’s ports, ensuring proper polarity and a clean, debris-free connection; avoid excessive bending radii in the fiber cable.
• Power up and verify link status: Restore power to the device (if powered down) and check the port status in the switch/router management interface; confirm the link lights illuminate and the negotiated speed matches 8Gbps where applicable.
• Validate performance and proceed with configuration: Use your device’s management tools to verify connectivity, perform a basic throughput test if possible, and apply any required port configurations for Fibre Channel or Ethernet traffic as part of your network design.

Frequently Asked Questions

• Q: Is this module compatible with all HPE devices?
  A: It is specifically designed for HPE AJ717A-compatible switches and routers. While it should work with many HP/HPE devices that support AJ717A-style SFP+ modules, always verify compatibility with your exact model and firmware version before deployment.
• Q: Can I use this SFP+ module for Fibre Channel and Ethernet simultaneously?
  A: The module is designed to support Fibre Channel at 8 Gbps and 8 GbE-capable SFP+ operation. The usable traffic type depends on the host device’s capabilities and the configuration of your SAN or network environment.
• Q: What distance can I expect with SMF?
  A: The maximum reach is up to 10 kilometers on single-mode fiber, but real-world distance depends on fiber quality, connectors, link budget, and network design.
• Q: Do I need special drivers for this module?
  A: Most SFP+ modules operate with standard interfaces recognized by compatible devices. In some cases, firmware updates for your switch or router may be recommended to ensure optimal recognition and performance.
• Q: What should I do if the module isn’t recognized?
  A: Confirm correct seating in the slot, verify the device supports AJ717A-compatible SFP+, reseat the module, inspect fiber connectors for damage or dirt, and test with a known-good fiber. If issues persist, consult StarTech or HP/HPE support and confirm firmware compatibility.