StarTech.com HPE JD093A Compatible SFP+ Module - 10GBASE-LRM 10GbE SFP+ Transceiver

Engineered for demanding enterprise networks, the StarTech.com HPE JD093A Compatible SFP+ Module delivers dependable 10 Gigabit Ethernet over fiber. Specifically designed to be HP JD093A/B compatible, this SFP+ transceiver is tested to ensure reliable operation with HP brand switches and routers. It supports 10GBASE-LRM over Multi-Mode Fiber (MMF) for short to intermediate distances, making it ideal for data centers, campus backbones, and server room deployments where uplinks or link aggregation require robust, hot-swappable fiber connectivity. With a compact, plug-and-play form factor, it offers a cost-effective upgrade path to 10GbE without replacing existing copper infrastructure.

• 10GBASE-LRM SFP+ transceiver: Delivers high-speed 10 gigabit Ethernet over fiber, optimized for Long Reach Mixed-mode (LRM) configurations to support reliable uplinks in modern networks.
• HP JD093A/JD093B compatibility: Specifically designed, programmed and tested to work with HP switches and routers, ensuring seamless interoperability in mixed-brand environments and preserving device warranties where applicable.
• Distance and fiber type: Supports up to 200 meters (656 feet) over Multi-Mode Fiber (MMF), enabling efficient connections within racks, closets, and data center corridors without compromising signal integrity.
• Hot-pluggable, plug-and-play: SFP+ form factor allows quick field replacement and minimal downtime, reducing maintenance overhead and keeping networks running during upgrades or troubleshooting.
• Reliable performance for 10GbE networks: Designed for consistent, enterprise-grade connectivity—ideal for server-to-switch links, uplinks, storage area networks, and high-bandwidth workloads that demand stable 10GbE transport over MMF.

Technical Details of StarTech.com HPE JD093A Compatible SFP+ Module

• Module type: SFP+ fiber transceiver
• Network standard: 10GBASE-LRM
• Fiber type: Multi-Mode Fiber (MMF)
• Maximum distance: Up to 200 meters (656 feet)
• Compatibility: HP JD093A/JD093B compatible; tested for reliable operation with HP switches and routers
• Data rate: 10 Gbps
• Form factor: SFP+ (hot-swappable)
• Vendor compatibility: StarTech.com with HP JD093A/B support

how to install StarTech.com HPE JD093A Compatible SFP+ Module

Installing a StarTech.com SFP+ module is straightforward and designed to minimize downtime. Follow these general steps to ensure proper seating and operation, while always referring to your specific switch or router’s user manual for any device-specific recommendations. This procedure assumes a typical hot-swappable SFP+ slot in an HP-branded or compatible networking device:

• Power down equipment only if your network policy requires it, though many SFP+ modules support hot-swapping for minimal disruption.
• Identify a vacant SFP+ slot on the switch or router where you intend to deploy the 10GBASE-LRM module.
• Align the module with the slot and gently insert it until the bail latch seats and you hear a click, indicating a secure connection.
• Connect the MMF fiber optic patch cable to the SFP+ module's fiber interface, ensuring the correct fiber polarity and connector type (LC/UPC typically) for your network.
• Power on the device (if previously powered down) and monitor the link status indicators on the device and transceiver. A solid link or activity light typically confirms proper operation.
• Configure the port as needed in your network switch or router settings, including speed negotiation, VLAN tagging, and any required uplink aggregation or quality-of-service policies.
• Test connectivity with a known-good test device or traffic generator to validate stability, throughput, and error-free transmission over the 10GbE link.

Frequently asked questions

• What systems is this transceiver compatible with? It is designed and tested to be HP JD093A/JD093B compatible and is intended for use with HP brand switches and routers. It should work in environments where HP devices are deployed alongside StarTech.com transceivers, but always verify with your equipment vendor’s compatibility matrix.
• What’s the maximum distance I can cover with this module? The module supports up to 200 meters (656 feet) over Multi-Mode Fiber (MMF), making it well-suited for data-center intra-rack or intra-building uplinks where shorter, high-bandwidth connections are required.
• Is this SFP+ module hot-swappable? Yes. The SFP+ form factor is designed for hot-swapping, enabling quick maintenance and upgrades with minimal downtime.
• What type of fiber cable should I use? Use Multi-Mode Fiber (MMF) cables appropriate for 10GbE deployments, typically with LC connectors. Ensure the cable type (OM1/OM2/OM3/OM4) matches the network requirements and patch panel specifications.
• What data rate does it support? The module supports 10 Gbps data rate, compatible with 10GBASE-LRM networks to deliver high-speed uplinks and interconnects for servers, storage, and switches.