StarTech.com HPE JD094B-BX-U Compatible SFP+ Module — 10GBASE-BX BiDi SMF Transceiver

The StarTech.com HPE JD094B-BX-U Compatible SFP+ Module is a purpose-built, high-performance transceiver designed to upgrade and optimize a 10 GbE network with BiDi single-mode fiber. Engineered for seamless integration with HPE JD094B-BX-U environments, this 10 GbE SFP+ module delivers reliable, plug-and-play operation for data centers, campuses, and enterprise networks that demand efficient fiber usage and robust bandwidth. With its 10GBASE-BX BiDi SMF architecture, it enables you to extend network reach without overspending on fiber infrastructure while preserving compatibility with a wide range of switches, NICs, and routers that support SFP+ modules. This is a practical choice for administrators who value uptime, ease of deployment, and cost-effective scalability in modern 10 Gigabit Ethernet deployments.

• High-performance 10GBASE-BX BiDi SMF solution: This SFP+ module is engineered for BiDi (bidirectional) 10 Gigabit Ethernet over single-mode fiber, reducing fiber count and simplifying fiber management while maintaining strong link integrity across distances typical of enterprise and data-center deployments.
• HPE JD094B-BX-U compatibility: Specifically designed to be interoperable with HPE servers and networking devices that require the JD094B-BX-U style transceiver, offering seamless replacement or upgrade paths without firmware or driver complications. This compatibility helps protect existing investments and ensures network continuity.
• SFP+ form factor for flexible deployment: The compact SFP+ module plugs into standard SFP+ slots on switches, routers, and network interface cards, enabling hot-swappable installation in supported equipment. Its design supports quick field replacement and minimizes downtime during maintenance windows.
• Optimized for 10 GbE bandwidth and BiDi efficiency: By leveraging BiDi technology, the module enables efficient use of fiber channels, delivering full 10 Gbps data rates while requiring less fiber management in many network topologies. This translates to improved ROI for uplinks, server access, and storage connectivity that rely on high-throughput links.
• Durable build and reliable operation in enterprise environments: Built for continuous operation in busy data centers, campuses, and edge networks, the StarTech.com SFP+ module is designed for consistent performance, predictable latency, and robust compatibility with a variety of SFP+ ports and fiber run configurations.

Technical Details of StarTech.com HPE JD094B-BX-U Compatible SFP+ Module

• Product Type: SFP+ transceiver module
• Data Rate: 10 Gbps (10GBASE-BX BiDi)
• Fiber Type: Single-mode fiber (SMF)
• Wavelengths: Bidirectional BiDi configuration (1310 nm / 1550 nm typical pairing)
• Form Factor: SFP+
• Interface Standards: SFP+ MSA compliant
• Compatibility: HPE JD094B-BX-U ecosystem (StarTech.com compatibility with HPE hardware)
• Operation: Plug-and-play with compatible hosts; designed for reliable, hot-swappable deployment
• Standards Support: 10GBASE-BX BiDi optical standard for high-speed Ethernet over SMF
• Link Distance: Optimized for BiDi fiber links; actual reach depends on fiber type, connector quality, and network configuration

how to install StarTech.com HPE JD094B-BX-U Compatible SFP+ Module

• Power down the device or confirm that your system supports hot-swapping of SFP+ modules, then prepare the equipment for maintenance.
• Remove the existing SFP+ module (if present) by gently unlocking the module latch and pulling it straight out from the SFP+ slot to avoid damaging the port.
• align the translucent latch tabs of the new StarTech.com HPE JD094B-BX-U Compatible SFP+ Module with the slot and insert the module firmly until it seats and the locking mechanism engages.
• Attach the appropriate BiDi SMF fiber cable to the module’s LC connectors, ensuring correct polarity and fiber pair orientation as specified by your network design. Verify that connectors are clean and pins are undamaged for optimal signal integrity.
• Power up the device (or verify hot-swap compatibility) and monitor the link status on the switch or NIC. Use your network management tools to confirm 10 Gbps operation and stable signal transmission.
• Configure port settings if needed (speed, duplex, flow control) to align with the rest of your network. In most BiDi 10GBASE-BX deployments, auto-negotiation will negotiate the best available link speed, but manual settings may be required in certain environments.

Frequently asked questions

• Q: What is 10GBASE-BX BiDi SMF, and how does it benefit my network?
  A: 10GBASE-BX BiDi is a bidirectional Ethernet standard that enables 10 Gbps communication over single-mode fiber by using two wavelengths. This approach reduces fiber plant complexity and costs while delivering high-bandwidth connections suitable for uplinks, server access, and storage networks. The StarTech.com module leverages BiDi SMF to maximize fiber efficiency in data-center and enterprise settings.
• Q: Is this module compatible with non-HPE devices?
  A: While this module is designed to be compatible with HPE JD094B-BX-U ecosystems, it is built as an SFP+ transceiver that follows industry-standard MSA specifications. It may operate in other vendors’ devices that support 10GBASE-BX BiDi SFP+ modules, but compatibility cannot be guaranteed for every model. Always verify with your hardware vendor before mixing brands.
• Q: Do I need any special drivers or firmware to use this SFP+ module?
  A: In most cases, no special drivers are required. SFP+ modules are generally detected by the host device automatically. Some switches may require a reboot after installation or non-default port settings; refer to your device’s administration guide for exact steps.
• Q: Can BiDi modules be used over longer distances?
  A: BiDi modules are designed to optimize fiber usage and support longer reach over SMF than multi-fiber alternatives in certain configurations. Actual distance depends on fiber quality, connector integrity, and link budget. Always plan for proper attenuation and optical budget when designing BiDi links.
• Q: What is the difference between BX and other 10GBASE-SFP+ modules?
  A: BX BiDi modules use bidirectional wavelengths to transmit and receive over single-mode fiber, reducing the number of fibers needed. Other 10GBASE-SFP+ modules may use SR, LR, or ER classifications that rely on either multimode fiber (SR) or longer-haul single-mode fiber (LR/ER) with different wavelength schemes. BX BiDi is specifically advantageous when fiber plant simplification and cost control are priorities.