StarTech.com HPE JD094B-BX60-D Compatible SFP+ Module - 10GBASE-BX BiDi SMF Transceiver

Upgrade your data center with a reliable, high-performance BiDi SFP+ transceiver that’s designed for seamless interoperability with Hewlett Packard Enterprise (HPE) switches and routers. The StarTech.com HPE JD094B-BX60-D Compatible SFP+ Module delivers 10 Gigabit Ethernet over single-mode fiber (SMF) using a bidirectional (BiDi) approach, enabling long-reach links while optimizing fiber utilization. It’s engineered, programmed and tested to work with 10GBase-BX capable HP equipment, and it pairs with StarTech.com's JD094B-BX60-U-ST to provide a proven, plug-and-play upgrade path for enterprise networks, data centers, and service providers. If you’re equipping a campus core, a server room, or a remote site, this SFP+ transceiver helps you achieve stable, scalable 10 GbE connectivity with minimal deployment friction.

• Compatibility and interoperability: Specifically designed to be compatible with HP JD094B-BX60-D devices and to pair with StarTech.com JD094B-BX60-U-ST, ensuring reliable operation with 10GBase-BX HP switches and routers for a smooth migration or upgrade path.
• BiDi 10GBASE-BX over SMF: BiDi SFP+ transceiver that transmits on one wavelength and receives on another over a single optical fiber, maximizing fiber utilization and reducing the need for additional fiber strands in many deployments.
• Long-distance capability: Engineered for extended reach, with up to 60 kilometers of single-mode fiber transmission, enabling multi-building campus networks and data-center interconnects without repeaters.
• Easy integration: Standard SFP+ hot-plug form factor with LC duplex connectors that fits into typical switch and router SFP+ slots, delivering straightforward insertion, management, and maintenance in existing networks.
• Thorough testing and HP compatibility: Each module is tested, programmed and shipped to ensure compatibility with HP 10GBase-BX ecosystem, delivering predictable performance and minimized troubleshooting for IT teams.

Technical Details of StarTech.com HPE JD094B-BX60-D Compatible SFP+ Module - 10GBASE-BX - 10 GbE Gigabit Ethernet BiDi Single Mode Fiber (SMF) Transceiver

• Transceiver type: SFP+ BiDi transceiver module designed for 10GBASE-BX operation over SMF.
• Data rate: 10 Gbps, delivering high-speed, low-latency Ethernet connectivity suitable for servers, storage networks, and high-performance computing environments.
• Wavelengths (BiDi pair): Tx/Rx wavelengths configured for BiDi operation (typical pair includes a 1310 nm transmit and 1550 nm receive, optimized for single-fiber operations and coexistence with standard SMF infrastructure).
• Fiber type: Single-Mode Fiber (SMF; 9/125 μm core/cladding) to enable long-distance links and wide compatibility with existing fiber deployments.
• Distance capability: Up to 60 kilometers on SMF, enabling robust links between distant data centers, campus buildings, or remote sites without additional amplification.
• Connector type: LC duplex connector for straightforward integration with standard fiber cabling and network gear.
• Compatibility: Designed to be HP JD094B-BX60-D compatible and to harmonize with StarTech.com JD094B-BX60-U-ST in the field, ensuring reliable plug-and-play deployment in mixed vendor environments.
• Standards: Compliant with 10GBASE-BX BiDi specifications for fiber optic Ethernet; supports industry-standard interoperability with 10GBASE-BX capable devices.
• Hot-pluggable: Yes; supports standard SFP+ hot-swapping for maintenance windows and minimal downtime during upgrades.
• RoHS and safety: RoHS-compliant and suitable for standard data center safety requirements.
• Operating environment: Designed for commercial data-center temperature ranges and typical rack environments to ensure stable performance in day-to-day operations.
• Form factor: SFP+ transceiver module with industry-standard footprint to fit in most 10G Ethernet host ports, switches, and routers supporting SFP+ plating.

How to Install StarTech.com HPE JD094B-BX60-D Compatible SFP+ Module

To install this StarTech.com SFP+ BiDi module, follow these straightforward steps to ensure proper operation and link stability:

1) Power down the network device (switch, router, or server NIC) into which the module will be installed. If you are replacing an existing transceiver, remove it carefully from the SFP+ slot.
2) Align the JD094B-BX60-D compatible module with the SFP+ slot, ensuring the top of the module is facing the correct orientation and that the alignment notch matches the slot.
3) Gently insert the module until it is fully seated and the locking mechanism engages. Do not force the module, as improper seating can cause link instability.
4) Connect a single-mode fiber optic cable with LC duplex connectors to the module, matching TX/RX polarity with the corresponding devices. Ensure the connectors are clean and free of dust, then gently secure the ferrules.
5) Reassemble any panels, power up the devices, and verify link status. Use the device’s management interface or console to confirm 10GBASE-BX link establishment, SFP+ diagnostic data, and expected optical performance. If you are using a counterpart in a different vendor’s equipment, verify interoperability and any required firmware or driver considerations.

Tip: When deploying BiDi SFP+ transceivers, it is often beneficial to pair the JD094B-BX60-D with its compatible StarTech counterpart (JD094B-BX60-U-ST) to ensure the most predictable behavior and to simplify configuration across mixed vendor environments.

Frequently asked questions

Q: What is 10GBASE-BX BiDi, and why would I use it?
A: 10GBASE-BX BiDi is a bidirectional fiber technology that carries data in both directions over a single mode fiber using two distinct wavelengths. It reduces fiber requirements and can simplify fiber plant migration by leveraging existing SMF infrastructure for high-speed links.

Q: Is this StarTech.com module compatible with HP JD094B-BX60-D gear?
A: Yes. This module is specifically designed to be compatible with HP JD094B-BX60-D devices and is tested to ensure interoperability with HP 10GBase-BX equipment, providing a reliable, plug-and-play solution for HP-based networks.

Q: How far can I run a link with this transceiver?
A: The JD094B-BX60-D compatible BiDi SFP+ module supports up to 60 kilometers over single-mode fiber, depending on fiber quality, attenuation, and network equipment. For longer runs, consider appropriate fiber and system planning to maintain link budget.

Q: What fiber type and connector do I need?
A: You’ll need single-mode fiber (SMF) with LC duplex connectors. Use clean, well-maintained fiber cables and proper PCI or NIC alignment to maximize link reliability and minimize insertion loss.

Q: Do I need special firmware or configuration?
A: In most cases, no special configuration is required. The module is pre-programmed and tested for HP 10GBase-BX ecosystems, so it should operate with standard 10GBASE-BX settings. If you experience link issues, verify compatibility with the host device, cable quality, and ensure you are using a compatible pair of transceivers (e.g., JD094B-BX60-D with JD094B-BX60-U-ST).

Q: Can I use this module for non-HP equipment?
A: While designed for HP compatibility, BiDi SFP+ modules may work in non-HP devices that support 10GBASE-BX. Always verify vendor compatibility and obtain confirmation from the device manufacturer before deploying in a production environment.