StarTech.com HPE JG234A Compatible SFP+ Module - 10GBASE-ER - 10GE Gigabit Ethernet SFP+ Single Mode Fiber (SMF) - 40 km DDM

The StarTech.com HPE JG234A Compatible SFP+ Module is an essential component for any network that requires high-speed connectivity and reliability over long distances. Designed for seamless integration with HP switches and routers, this transceiver module provides 10GBASE-ER performance, ideal for enhancing your existing networking infrastructure. With a focus on compatibility and functionality, this module is the perfect choice for businesses seeking to bolster their network capabilities.

• Seamless Compatibility: This SFP+ module is specifically engineered to ensure complete compatibility with HP JG234A devices, allowing for effortless integration with your current networking hardware.
• Extended Reach: Achieve robust communication over long distances with a maximum transfer distance of up to 40 km (24.8 miles), making it perfect for large enterprises and data centers.
• High Performance: Operating at a wavelength of 1550nm, this module supports data transfer rates of 10 Gbps, significantly enhancing your network's performance for high-speed data communication.
• Hot-Swappable Design: Upgrade or replace the module without powering down your network, minimizing downtime and maximizing efficiency with its hot-swappable feature.
• Lifetime Warranty: Enjoy peace of mind with a lifetime warranty from StarTech.com, backed by free lifetime multilingual technical support for any assistance you may require.

Technical Details of the StarTech.com HPE JG234A Compatible SFP+ Module

• Wavelength: 1550nm
• Maximum Data Transfer Rate: 10 Gbps
• Type: Single Mode
• Connection Type: LC
• Maximum Transfer Distance: 40 km (24.8 mi)
• Mean Time Between Failures (MTBF): 426,514,897 hours
• Power Consumption: < 1.6W
• Digital Diagnostics Monitoring (DDM): Yes

How to Install the StarTech.com HPE JG234A Compatible SFP+ Module

Installing the JG234A-ST module is straightforward and can be accomplished in a few easy steps:

1. Ensure that your switch or router is powered on.
2. Locate the SFP+ port on your networking device.
3. Carefully align the module with the connector and gently slide it into the port until it clicks into place.
4. Verify that the module is recognized by your device's interface.
5. Connect your single-mode fiber cable using the LC connection type to establish a network connection.
6. Once installed, the module will automatically configure itself, allowing you to enjoy enhanced network performance immediately.

Frequently Asked Questions

• Is this module compatible with devices other than HP? While the JG234A-ST is specifically designed for HP devices, it may also work with other compatible networking equipment that follows the MSA standards. However, for guaranteed compatibility, using it with HP equipment is recommended.
• What is the maximum distance supported by this module? The StarTech.com HPE JG234A compatible SFP+ module supports a maximum distance of up to 40 km (24.8 miles) over single-mode fiber, making it suitable for long-distance networking applications.
• Can I replace the module while the network is active? Yes, the hot-swappable nature of this module allows you to replace or upgrade it without shutting down your network, ensuring minimal disruption to your operations.
• What kind of support does StarTech.com offer for this product? StarTech.com provides a lifetime warranty and free lifetime multilingual technical support for this SFP+ module, which means you can rely on their assistance whenever you need help.
• What type of fiber cable is required for this module? The JG234A-ST requires single-mode fiber (SMF) cable with an LC connection type to function correctly in your network setup.