StarTech.com Industrial Fiber to Ethernet Media Converter — 100Mbps SFP to RJ45/CAT6

Discover seamless fiber-to-copper networking with the StarTech.com Industrial Fiber to Ethernet Media Converter. Built to thrive in demanding environments, this industrial-grade device bridges your fiber and copper networks at 100 Mbps, delivering reliable connectivity for legacy devices, control systems, and edge equipment. With a compact, rugged IP-30 enclosure and a 12V input power design, it is engineered for factory floors, outdoor cabinets, and other harsh locations where uptime is critical. This media converter uses a flexible SFP slot to accommodate both single-mode and multimode fiber, enabling scalable deployment across campuses, data centers, and remote sites. Whether you’re expanding a fiber backbone or integrating older Ethernet devices into a modern network, this converter offers a straightforward, driver-free solution that minimizes complexity while maximizing compatibility. By combining StarTech’s durable engineering with plug-and-play simplicity, you can accelerate deployment, reduce cabling clutter, and future-proof your network infrastructure without sacrificing performance or reliability.

• Flexible fiber-to-copper bridge: Converts 100 Mbps fiber to copper Ethernet (RJ-45) and supports reverse operation, enabling seamless integration of legacy devices with modern networks.
• Supports SFP-based fiber modules for SM/MM: The device provides an SFP slot that accepts standard fiber transceivers, offering compatibility with both single-mode and multimode fiber to match your installation path.
• Industrial-grade, IP-30 enclosure: Rugged design built to withstand demanding environments such as factory floors, outdoor cabinets, and industrial control rooms, delivering reliable operation over time.
• 12V DC input power with quiet operation: Power-efficient, fanless design that is easy to power from common industrial power rails, enabling quiet installation in cabinets and equipment racks.
• Plug-and-play with auto-negotiation: No software or drivers required—set up is quick and straightforward, with auto-negotiation ensuring compatibility with connected devices and minimizing configuration.

Technical Details of StarTech.com Industrial Fiber to Ethernet Media Converter

• Network Interface: 1 x RJ-45 10/100 Mbps Ethernet port for copper connectivity
• Fiber Interface: 1 x SFP slot for fiber modules, supporting 100 Mbps data transfer with SM/MM fibers
• Function: Industrial-grade fiber to copper media conversion for Ethernet networking
• Power Requirements: 12V DC input for reliable, low-voltage operation
• Enclosure: IP-30 rated rugged housing designed for harsh environments
• Environment: Industrial-grade construction suitable for factory and remote-site deployments
• Installation: Plug-and-play operation with no software required; compatible with standard Ethernet gear

How to install StarTech.com Industrial Fiber to Ethernet Media Converter

• Power down all equipment before installation. Connect the converter to a stable 12V DC power source using the provided power input.
• Insert a compatible SFP module into the SFP slot. Choose an SM or MM fiber module that matches your fiber type and distance requirements.
• Attach the fiber optic cable from your fiber network to the SFP module, ensuring the correct connector type and orientation for your fiber standard.
• Connect your Ethernet device to the RJ-45 port using a CAT5e/CAT6 cable. Verify that both ends are securely plugged and that devices are configured for proper speed and duplex settings if needed.
• Power on the converter and the connected devices. Check the LED indicators on the unit to confirm link status and activity; position the unit in a suitable enclosure or mounting location, ensuring adequate ventilation and cable management.

Frequently asked questions

• What is the StarTech Industrial Fiber to Ethernet Media Converter used for?

  The device serves as a bridge between fiber and copper networks, converting a fiber-based link to a 100 Mbps RJ-45 Ethernet connection. It is ideal for integrating legacy Ethernet devices, sensors, or controllers with modern fiber networks or extending fiber to copper reach in industrial environments.

• Does it support both single-mode and multimode fiber?

  Yes. The SFP slot accepts standard fiber transceivers, enabling compatibility with either SM or MM fiber types based on the installed module and your network requirements.

• Do I need software or drivers to operate this converter?

  No software or drivers are required. The media converter is designed for plug-and-play operation, with auto-negotiation features to automatically configure speed and duplex with connected devices.

• Is the enclosure suitable for industrial environments?

  Yes. The unit uses an IP-30 rated enclosure, engineered for durability in challenging environments such as manufacturing floors, equipment rooms, and outdoor cabinets where dust and debris are present.

• What power does it require?

  The converter operates on 12V DC input, offering a simple and robust power solution compatible with common industrial power rails and power bricks.