StarTech.com Juniper SFP-GE10KT15R13 Compatible SFP Module - 1000BASE-BX-D BiDi Fiber (SMF)

Upgrade your network with a reliable, high-performance SFP transceiver designed to deliver seamless Gigabit Ethernet over single-mode fiber. The StarTech.com Juniper SFP-GE10KT15R13 Compatible SFP Module – 1000BASE-BX-D – 1 GbE BiDi Fiber (SMF) combines trusted StarTech quality with Juniper compatibility, offering a plug-and-play solution that reduces downtime and simplifies cabling. Built to meet the demands of modern data centers, enterprise networks, and branch offices, this module delivers consistent throughput, low latency, and robust operation across mixed environments. Whether you’re extending a fiber backbone, replacing a failed module, or standardizing SFP deployments, this BiDi transceiver provides dependable performance and easy management for long-term network stability.

• Optimized for Juniper networks: specifically tested to work with Juniper GE10KT15R13-based gear, ensuring reliable link establishment and seamless interoperability.
• BiDi 1000BASE-BX-D over SMF: utilizes a single fiber pair to support full-duplex 1 Gbps Ethernet with reduced fiber count and simplified cabling.
• Plug-and-play and hot-swappable: inserts into any standard SFP slot and quickly establishes a link with supported devices, minimizing downtime during upgrades and maintenance.
• MSA-compliant and vendor-agnostic: designed to meet SFP MSA standards for broad compatibility with a range of devices beyond Juniper.
• Compact, energy-efficient design: low power consumption and a compact form factor ideal for dense racks and high-density deployments.

Technical Details of StarTech.com Juniper SFP-GE10KT15R13 Compatible SFP Module

• Product type: SFP transceiver module
• Standard: 1000BASE-BX-D
• Data rate: 1 Gbps
• Fiber type: Single-Mode Fiber (SMF)
• BiDi: Yes (bi-directional transmission on a single fiber)
• Interface: SFP (Small Form-factor Pluggable)
• Wavelength: BiDi dual-wavelength transmission (Tx/Rx on different wavelengths)
• Compatibility: Juniper SFP-GE10KT15R13 compatible network equipment
• Manufacturer: StarTech.com
• Package contents: SFP module (contents may vary by seller)

How to install StarTech.com Juniper SFP-GE10KT15R13 Compatible SFP Module

To install this SFP module, power down the device if required by your equipment’s hot-swap guidelines, or verify that your system supports safe hot-swapping. Remove the existing transceiver from the designated SFP slot if present, aligning the module with the slot and sliding it in until it seats firmly with a click. Connect the SMF BiDi fiber cable to the module’s optical ports, ensuring the transmitting and receiving ends are terminated correctly for a BiDi link. Reattach any fiber management accessories, apply power, and monitor the device console or management interface for a successful link indication. On compatible devices, the link should establish automatically, and the port should report a stable 1 Gbps connection. If your network uses link aggregation or specific VLAN policies, verify those settings post-install to ensure optimal performance. Because this is a BiDi SFP, confirmation of the remote transceiver’s Tx/Rx wavelengths is recommended to guarantee proper alignment and performance across the end-to-end connection.

Frequently asked questions

• Q: Is this StarTech.com module compatible with Juniper devices using SFP-GE10KT15R13 slots? A: Yes, it is marketed as compatible with Juniper SFP-GE10KT15R13 gear, providing 1000BASE-BX-D BiDi fiber connectivity in SMF. Always verify device-specific compatibility lists if in doubt.
• Q: What does 1000BASE-BX-D BiDi mean? A: 1000BASE-BX-D is a BiDirectional (BiDi) SFP standard that transmits and receives over a single fiber using different wavelengths, enabling full-duplex Gigabit Ethernet over SMF with a simplified fiber footprint.
• Q: Do I need a matching BiDi fiber pair? A: Yes. BiDi links require the remote transceiver to use complementary Tx/Rx wavelengths; ensure you have the proper BiDi pair or the other end is BiDi-compatible to achieve a working link.
• Q: Can I hot-swap this module? A: SFP modules are typically hot-swappable, allowing insertion or removal without powering down the entire system, depending on the device’s guidelines. Always follow your equipment’s maintenance procedures.
• Q: What performance should I expect? A: The module supports up to 1 Gbps link speed over SMF with 1000BASE-BX-D BiDi; actual performance depends on cable length, optical budget, and network configuration.