StarTech.com MSA Uncoded SFP+ Module - 10GBASE-LRM

The StarTech.com MSA Uncoded SFP+ Module - 10GBASE-LRM delivers high-performance, reliable connectivity for demanding networks that demand speed and interoperability. This 10GE Gigabit Ethernet SFP+ transceiver is designed for multimode fiber (MMF) environments, offering robust throughput and low-latency links up to 200 meters. Built to be MSA-compliant and uncoded, it prioritizes broad compatibility across a wide range of switches, routers, and network interface cards, making it an ideal choice for data centers, campus networks, and enterprise edge deployments. With Digital Diagnostic Monitoring (DDM) support, you gain real-time visibility into critical operating conditions such as optical power, temperature, and voltage, empowering proactive network management and quicker fault isolation. If you’re equipping a growing LAN or upgrading an existing fiber backbone, this StarTech module provides a dependable, plug-and-play solution that minimizes downtime while maximizing your 10G infrastructure investments.

• Interoperable SFP+ solution: The MSA uncoded design ensures broad compatibility across vendors that support SFP+ transceivers, enabling seamless integration into mixed-brand networks without proprietary restrictions or complicated configuration. This makes it easier to scale networks, replace legacy modules, or implement multi-vendor deployments while preserving performance and reliability.
• High-speed 10GBASE-LRM over MMF up to 200 meters: Designed for multi-mode fiber links, this transceiver delivers 10 Gigabit Ethernet performance over MMF cabling with a reach of up to 200 meters, supporting demanding workloads such as server-to-server clustering, storage traffic, and high-throughput virtualization environments with minimal latency.
• Digital Diagnostic Monitoring (DDM): Built-in DDM provides real-time insight into critical parameters including optical transmit power, received power, temperature, and supply voltages. IT teams can monitor health and performance from device management interfaces, enabling proactive maintenance and reducing downtime in busy networks.
• Uncoded, compact SFP+ design: As an MSA uncoded module, it’s engineered for universal compatibility in standard SFP+ slots. Its compact form factor supports dense 10G deployments, while its rugged construction and standardized interface help simplify inventory management and field replacements.
• Easy installation and long-term reliability: This transceiver is engineered for straightforward deployment in enterprise racks, data centers, and edge appliances. Its robust build quality, resistive ESD protection, and low power footprint contribute to dependable performance over the lifespan of your 10G infrastructure.

Technical Details of StarTech.com MSA Uncoded SFP+ Module - 10GBASE-LRM

• Form factor: SFP+ transceiver module
• Network standard: 10GBASE-LRM
• Fiber type: MMF (multimode fiber)
• Wavelength: 1310 nm
• Reach: 200 m
• Data rate: 10 Gbps
• DDM: Supported (Digital Diagnostic Monitoring)
• MSA compliance: Uncoded, industry-standard SFP+ module

How to install StarTech.com MSA Uncoded SFP+ Module - 10GBASE-LRM

• Power down the device if required by your network equipment’s guidelines or confirm hot-swapping support for the SFP+ port you’re installing into.
• Hold the SFP+ module by its edges and align it with the SFP+ receptacle. Gently insert the module until the latching mechanism engages and the module is firmly seated in the slot.
• Prepare your MMF patch cable with LC connectors, ensuring the fiber is clean and free of dust. Route the fiber to the destination switch, router, or NIC.
• Connect the MMF patch cable to the SFP+ module’s LC port, then connect the other end to the corresponding SFP+ port on the network device. Ensure correct polarity and secure connector ferrules to prevent signal loss.
• Power on the device (if required) and verify link status via the device’s management interface or LED indicators. Confirm a 10 Gbps link and check for stability. Use the DDМ data reported by the module to monitor optical power, temperature, and voltage for ongoing health checks.

Frequently asked questions

• Q: What is 10GBASE-LRM? A: 10GBASE-LRM is a 10 Gigabit Ethernet standard designed for long-reach multimode fiber links, typically up to around 200 meters, using a 1310 nm wavelength. The StarTech MSA Uncoded SFP+ Module implements this standard in a plug-and-play, uncoded form factor to maximize interoperability and performance in mixed-network environments.
• Q: What does uncoded mean? A: In the context of SFP+ modules, uncoded means the transceiver is not vendor-coded for a single network device. This enhances cross-vendor interoperability, allowing the module to operate in many switches, routers, or NICs that support standard SFP+ 10GBASE-LRM operation.
• Q: What is DDM? A: DDM stands for Digital Diagnostic Monitoring. It provides real-time, parameterized data about the transceiver’s operating conditions—such as optical power levels, temperature, and voltage—enabling proactive monitoring and quick issue detection in live networks.
• Q: Is this module compatible with different brands? A: The module is designed to be broadly compatible with devices that support standard SFP+ 10GBASE-LRM transceivers. Always verify your specific switch, router, or NIC's compatibility matrix to ensure optimal interoperability in your environment.
• Q: What kind of fiber and cable do I need? A: You’ll need Multimode Fiber (MMF) with LC connectors. The module is designed for MMF links up to 200 meters when using 10GBASE-LRM. Ensure you choose an MMF type (OM2/OM3, etc.) compatible with your link budget and equipment.